Barnes 4WD

When Barnes 4WD designed the rebuild-able Enduro suspension joint we combined the best materials, the best manufacturing processes and the best ste...

A great DIY welding project Laser Cut and CNC bent here in North Carolina. The same proven designs we have sold and ran for years, now offered ...

A great DIY welding project Laser Cut and CNC bent here in North Carolina. The same proven designs we have sold and ran for years, now offered ...

A great DIY welding project Laser Cut and CNC bent here in North Carolina. The same proven designs we have sold and ran for years, now offered ...

We designed our Jeep JK Superduty Dana 60 swap kit to make it easy for you to put a Dana 60 from a 1999-2004, or 2005-up Ford Superduty in the fron...

If you are looking to upgrade the size of the hardware on the front upper control arms on your Jeep to 9/16" we have you covered.  This bushing is ...

Looking to add a sweet, beefy TJ/YJ bumper to your Jeep Cherokee or Comanche? Barnes 4WD has your covered with our Jeep Cherokee front bumper brack...

We are proud to introduce our Ford Sterling 10.25 and 10.5 heavy duty cast nodular iron differential cover.  This cover is designed for the ultimat...

This bracket was designed to make strapping down your rig to a trailer even easier. Simply place the bracket into your trailers stake pocket and st...

This is our weld on brake line tab it will work with most clip style brake lines and our Brake Line Clips.  Dimensions are as follows: 5/8" hole fo...

These are our weld on Brake Line Tabs with a 7/16" hole, they are useful for AN bulkhead style brake lines or other lines.  Dimensions are as follo...

The Barnes 4WD Winch Fairlead Mount installs between the winch and the bumper so you can mount your Hawse or roller fairleads. Winch mounting bolt...

Heavy Duty 5/8 - 18 Tube Inserts Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength...

High Misalignment spacer reduces a 5/8 inch bore to a 1/2 inch bolt hole. Mounting width when installed is 1 1/2 inches with 56° of total misalign...

High Misalignment spacer reduces a 3/4 inch bore to a 1/2 inch bolt hole.   Mounting width when installed is 2 inches with 60° of total misalignmen...

High Misalignment spacer reduces a 3/4 inch bore to a 5/8 inch bolt hole. Mounting width when installed is 2 inches with 56° of total misalignment...

High Misalignment spacer reduces a 1 inch bore to a 5/8 inch bolt hole. Mounting width when installed is 2 5/8 inches with 56° of total misalignme...

High Misalignment spacer reduces a 1 inch bore to a 3/4 inch bolt hole. Mounting width when installed is 2 5/8 inches with 56° of total misalignme...

Misalignment spacer for 1 inch bore. Mounting width when installed is 2 5/8 inch with 40° of total misalignment (20° in either direction). Sold I...

Misalignment spacer for 7/8 inch bore. Mounting width when installed is 2 inch with 20° of total misalignment (10° in either direction). Sold Ind...

Gussets are a mandatory for a safe cage. Our gussets add much needed structural rigidity to your cage. These gussets are made from 1/4" and have ...

Gussets are a mandatory for a safe cage. Our gussets add much needed structural rigidity to your cage. These gussets are made from ¼" and have 2" l...

Gussets are a mandatory for a safe cage. Our gussets add much needed structural rigidity to your cage. These gussets are made from ¼" and have 2" l...

Tube ends can really set off a project and give it a great finished look. These are also great for keeping debris out of your tubes. We offer the...

We offer our two bolt flanges in three convenient sizes. These flanges are pre drilled for 3/8" bolts and are made from high strength ¼" thick pla...

Gussets are a mandatory for a safe cage. Our gussets add much needed structural rigidity to your cage. This is our line of cutout gussets, they mak...

This is one of our most versatile shock tabs, it can be used for many other applications. This tab is intended to be welded to any chassis tube wor...

These tube link tabs are cut to fit a 1 ¾" tube but can be easily modified to fit other common sizes in a matter of minutes. These tabs are 3/16" ...

These link mounting brackets are made to be welded directly to any square mounting surface. This is a super strong CNC bent, Laser cut bracket made...

These axle link tabs are precut to fit a 3" tube but can be easily modified to fit other common sizes in a matter of minutes. These tabs are 3/16"...

This is one of our most versatile shock tabs, it can be used for many other applications. This tab is intended to be welded to any square surface. ...

This is our most popular shock bracket, it is designed to be mounted on top of the axle to increase clearance and minimize shock damage. This brack...

This is a very diverse flat bottom shock mount. It is designed to be mounted to any flat surface. This shock mount is laser cut and formed from 1/4...

This is our most popular tube chassis shock bracket. This bracket is designed for the shock bolt to be parallel to the tube, this helps to prevent ...

 We offer all our shackles in three different lengths to better suit your application. Shackles are measured from the center of bolt hole to center...

Spring Perches are not a one size fits all item. These perches are specially made for Dana 44HD applications they are cut for a 3" axle tube and ar...

Spring Perches are not a one size fits all item. These perches are specially made for Dana 70 and GM 14 applications they are cut for a 3 1/4 Inch ...

Spring Perches are not a one size fits all item. These perches are specially made for IH Scout applications they are cut for a 2.5" axle tube and a...

Spring Perches are not a one size fits all item. These perches are specially made for 3" Axle applications they are cut for a 3" axle tube and are ...

Bolt on Disc Brake bracket for the GM 14 bolt full float (Dual Rear Wheel and Cab & Chassis) axles manufactured before 1988. Not intended as a ...

This weld on bracket can be used to mount a disc brake caliper to any axle with a 3" axle tube. This disc brake bracket is made from 3/8" US plate ...

This weld on bracket can be used to mount a disc brake caliper to any axle with a 3 1/4" axle tube. This disc brake bracket is made from 3/8" US pl...

This weld on bracket can be used to mount a disc brake caliper to any axle with a 3 1/2" axle tube. This disc brake bracket is made from 3/8" US pl...

Gussets are a mandatory for a safe cage. Our gussets add much needed structural rigidity to your cage. This is our line of cutout gussets, they mak...

These Scout U-Bolt plates are made for 1 3/4" to 2" wide Leaf Springs, if the center locating pin hole is used it will fit a 2 1/2"-3 5/8" axle tub...

These Toyota U-Bolt plates are made for 2 3/4" wide Leaf Springs, if the center locating pin hole is used it will fit a 2 3/4"-3 5/8" axle tube. Th...

Barnes 4wd u-bolts are anything but standard! This u bolt measures 5/8" X 3 3/8" X 10" and are a great fit for a GM 14 bolt axle. The biggest misc...

Barnes 4wd u-bolts are anything but standard! This u bolt measures 5/8" X 2 3/4" X 10" and are a great fit for Dana 44 axles. The biggest misconce...