Steering & Steering Components

Got a broken, crumbling factory aluminum steering box spacer on your Jeep Cherokee or Comanche? Barnes 4WD has the solution with our XJ/MJ Steering...

We created our Dana 60 Super Duty unit bearing grease zerk adapter to install in the same location as the ABS sensor on Ford 99-23 Superduty axles....

Important notes! - This kit does not include a lifetime warranty. Aluminum is much more elastic that DOM and will serve you better on the rocks, ...

We are proud to introduce our 99-up Ford Super Duty Dana 60 heavy duty nodular iron cast low profile differential cover.  This cover is designed fo...

If you are going from heim joints to tie rod ends on your steering or if you are flipping your tie rod to the top of the knuckle, then our tapered ...

If you are looking for a serious upgrade for the steering on your Jeep JK, this is the steering kit that you need.  This 1 ton kit uses quality hea...

Set of 1 high steer stud and nut to attach high steer arms to kingpin Dana 60 knuckles.   This stud is manufactured from 4140 chromoly for the ulti...

Important notes! - This kit does not include a lifetime warranty. Aluminum is much more elastic that DOM and will serve you better on the rocks,...

Intended for use with XJ/TJ/ZJ Models 1/4" Steel Sold In Pairs Welding Is Required

Bolt on installation. 1 1/4" Shank Tie Rod Ends. 2" OD 7075 T6 Aluminum Steering Links 0-4" lift height compatible. Works with the factory steerin...

The TeraFlex TJ: Pro LCG Dana 30/44 High Steer System addresses many front-end steering issues associated with lifted TJ Wrangler/Unlimited models....

This kit is designed to mount a double ended ram to a Super Duty Dana 60 without using a truss or skid system. The Bracket centers the ram on the a...

Sometimes it's just not possible to fit crossover steering on your rig this is where our Y-link steering kit can save the day.  If you are having t...

Set of 8 studs and nuts to attach high steer arms to kingpin Dana 60 knuckles.  These studs are manufactured from 4140 chromoly for the ultimate in...

Sometimes it's just not possible to fit crossover steering on your rig this is where our Y-link steering kit can save the day.  If you are having t...

The Rough Country Frame Support Kit is a steering for the Chevy/GMC C10/K10 Truck & SUV/K5 Blazer 4WD 1973-1991. Installation takes about 3-4 h...

After lifting your vehicle it is highly recommended to install a raised steering arm to correct the vehicles steering geometry. Due to the increase...

The Rough Country Steering Box Brace fits the Dodge Ram 2500 2009-2010/Ram 3500 2009-2010/Ram 2500 2011-2016/3500 2011-2016. Creates a tighter stee...

The Rough Country Steering Box Brace fits the Dodge Ram 2500 2003-2008/Ram 3500 2003-2008. Creates a tighter steering feel, eliminating any side-to...

The Rough Country Steering Box Brace fits the Jeep Wrangler TJ 1997-2002. Installation takes about .5 hours. At a Glance Brand: Rough Country Part ...

The Rough Country Steering Box Brace fits the Jeep Wrangler YJ 1987-1995. Installation takes about .5 hours. At a Glance Brand: Rough Country Part ...

The Rough Country Steering Box Brace fits the Ram 3500 2017-2025/2500 2017-2025. Creates a tighter steering feel, eliminating any side-to-side play...

Barnes 4wd is proud to offer the best crossover steering kit on the market, complete with high quality 1 ton tie rod ends.  This kit is a huge upgr...

Barnes 4wd is proud to offer the best offset crossover steering kit on the market, complete with high quality 1 ton tie rod ends.  All of the inser...

Sometimes it's just not possible to fit crossover steering on your rig this is where our Y-link steering kit can save the day.  If you are having t...

This kit is designed to mount a double ended ram to a King Pin Dana 60 without using a truss or skid system. The Bracket centers the ram on the axl...

Our flat hydraulic steering valve mount is designed for custom builders that are looking for a blank slate that they can modify to suit there needs...

Our tube hydraulic steering valve mount is a great option for installing a orbital valve on a tube chassis or a custom tube dash.  This bracket is ...

Sometimes it's just not possible to fit crossover steering on your rig this is where our Y-link steering kit can save the day.  If you are having t...

Will not work with OX locker diff cover and non-low profile Superduty diff covers Looking to get lock to lock steering on your Super Duty swapped J...

KINGPIN HIGH STEER EXPLAINED Need to get your crossover steering up out of the way? Barnes 4WD has you covered. Our Kingpin Dana 60 high steer arm...

Our Jeep JK 1 ton 7075 aluminium steering is one of the most important upgrades you can do to your Jeep JK, not only will you get larger stronger...

Mounting a steering column in a tube chassis or a full bodied rig with a cage after the addition of full hydraulic steering can be a challenge, oft...

Our Dana 60 bronze upper kingpin bushings have been engineered to take the place of the factory plastic bushings that can fail under heavy use.  If...

This is our Dana 60 Passenger spring-less high steer arm, this arm will bolt to any knigpin 1 ton front axle.  Our arms are 1" thick steel and use ...

Barnes 4wd is proud to offer the best Dana 60 high steer cross-over steering kit on the market, complete with high quality 1 ton tie rod ends.  Thi...

This is a high quality single stud, nut, and cone washer for our Dana 44 high steer arms.  These studs are manufactured from 4140 chromoly for the ...

This is a high quality passenger Dana 44 high steer arm, manufactured in the U.S.A. from 1" thick steel.  It is tapered for GM 1 ton tie rod ends a...

This is our Dana 60 driver spring-less high steer arm, this arm will bolt to any knigpin 1 ton front axle.  Our arms are 1" thick steel and use a l...

Your search for the highest quality Dana 44 high steer arms at the lowest price ends here, we offer the most complete kit available.  Our Dana 44 h...

This kit comes with everything that you need to convert your Dana 44 to crossover steering.  Kit Contents: 1 Passenger Dana 44 High Steer Arm 1 Sta...

Sometimes its just not possible to fit crossover steering on your rig this is where our Y-link steering kit can save the day.  If you are having to...