Engine/Underhood

This assembly includes the rear third soft top bow, the vertical uprights and the knuckles. It fits TJ models with the factory soft top and is not ...

This is a right side liftgate ball stud. It bolts through the liftgate glass and serves as the mounting point for the liftgate strut. It replaces O...

The Sprint Booster is a power converter listed for the Jeep Wrangler JK and Grand Cherokee WK2 with automatic transmission.Fitment: 14-15 Jeep Wran...

The aFe SCORCHER Pro is a handheld performance programmer that loads calibrated tunes for vehicles equipped with aFe POWER products. Tunes are deli...

This aFe Scorcher GT power module increases turbo boost. It includes a case and a wire harness with factory style connectors, and an LED switch let...

The Scorcher Blue is a plug and play electronic power module that works without modifying the engine control unit. A LED switch in the cabin select...

This is an OE replacement air filter using Pro 5R media, an oiled five layer cotton gauze that gets progressively finer. It has rounded, evenly spa...

This Magnum FLOW Pro 5R filter from aFe is an inverted replacement filter that uses oiled, five layer cotton gauze media. The pleats are rounded an...

This cold air intake has an oil free, 7-1/2in tall inverted conical 360 degree radial flow filter. A one piece 3in mandrel bent aluminum tube carri...

This cold air intake joins the filter to the housing with four captive screws. The Pro Dry S filter has three layers of progressively finer synthet...

This oiled OE replacement air filter has seven layers of cotton gauze and synthetic media. It can be washed and reused, and has tall open pleats an...

This Magnum FLOW inverted air filter uses three layers of progressive synthetic Pro DRY S media that does not need oil. It has rounded open pleats ...

This intake kit has a one piece 16-gauge powder coated heat shield that installs without cutting or drilling. It uses a molded plastic intake tube ...

This aFe Momentum GT cold air intake system uses Pro GUARD 7 filter media and is listed for the 2.0L four cylinder Wrangler JL. The design uses few...

This is the aFe Magnum FORCE Stage 2XP cold air intake with a Pro DRY filter, in black. It uses an oil free, 9in tall inverted top conical 360 degr...

This Stage 2XP cold air intake uses Pro GUARD 7 filter media and has a black finish.Fitment: 18-20 Jeep Wrangler JL 2.0T.MPN: 802959545430 · UPC: 8...

This Super Stock induction system from aFe uses a Pro 5R pre oiled, five layer cotton gauze filter. The inverted filter design works inside the fac...

This is the aFe Super Stock Induction System. It uses a Pro DRY S filter with three layers of oil free synthetic media in an inverted replacement f...

This aFe Super Stock induction system uses an inverted replacement filter that fits inside the factory airbox. The Pro 5R media has five layers of ...

This aFe Super Stock Induction System uses a Pro Dry S filter with three layers of oil free synthetic media that needs no oil during maintenance. T...

This is an aFe Quantum cold air intake system with a Pro DRY S filter.Fitment: 18-20 Jeep Wrangler JL L4 2.0L (t)MPN: 802959530672 · UPC: 802959530672

This Apollo GT Series Cat Back exhaust uses 3in mandrel bent 409 stainless steel tubing and a single high flow stainless muffler with a deep tone. ...

This aFe Apollo GT Series cat back exhaust system uses 3in 409 stainless steel and comes with a black tip. It is listed for the 2021 Ford Bronco wi...

This direct fit cat back system exits straight on the driver side without a tip. It sits closer to the undercarriage than the stock system for adde...

This Vulcan axle back system uses mandrel bent 304 stainless steel tubing and a high flow 304 stainless muffler. It ends in dual 4in black tips and...

This MagnaFlow Street Series axle back exhaust has 2.5in mandrel bent main piping leading to a large straight through muffler. It exits through dua...

This aFe Vulcan axle back exhaust uses mandrel bent 304 stainless steel tubing that steps from 3in to 2-1/2in, with a high flow stainless muffler. ...

This Vulcan cat back system is built from 304 stainless steel with mandrel bent 3in to 2.5in tubing and 304 stainless mufflers. It ends in dual 4in...

This axle back system uses 3in to 2-1/2in mandrel bent 304 stainless tubing and a 304 stainless muffler with a mild sound. It finishes with dual 4i...

This MagnaFlow Street Series axle back system uses mandrel bent 2.5in main piping that leads into a large straight through muffler. The exhaust exi...

This Vulcan Series Cat Back exhaust is built from mandrel bent 304 stainless steel tubing that steps from 3in down to 2-1/2in. It uses 304 stainles...

This Overland Series cat back exhaust is a direct fit system for the turbo 2.3L four cylinder Bronco. It mounts closer to the undercarriage than th...

This aFe Momentum GT intake uses a 360 degree radial flow Pro DRY S filter with three layers of oil free synthetic media. The sealed one piece hous...

This cold air intake uses a 360-degree radial flow filter with three layers of oil free Pro DRY S media. The one piece sealed housing is made of he...

This cold air intake uses a 360 degree radial flow filter with oiled Pro GUARD 7 media made of cotton and synthetic layers. The one piece sealed ho...

This is the aFe POWER Momentum HD cold air intake system with a pre oiled Pro 5R filter. The 360 degree radial flow filter uses five layers of prog...

This cold air intake uses a 360 degree radial flow Pro GUARD7 filter with five layers of cotton media and two layers of synthetic media. The one pi...

This cold air intake uses a 360 degree radial flow air filter with oiled Pro 5R media, which has five layers of cotton gauze.Fitment: 2021 Ford Bro...

This is a replacement cap for the coolant recovery tank. It is molded plastic with black embossing and has a retaining collar. It replaces OE 52079...

This replacement thermostat has a 195 degree opening temperature and a steel construction. It replaces OE 83501426.Fitment: 72-06 Jeep models.MPN: ...

This radiator fan shroud from Omix is a replacement for TJ models with the 4.0L engine. It is intended for vehicles where the original shroud has c...

This is a worm style radiator hose clamp that adjusts from 1-5/16 to 2-1/4in. It is stainless steel, sold individually and listed for various Willy...

This replacement thermostat has a 160 degree opening temperature and a steel construction. It replaces OE 812050.Fitment: 41-71 Willys and Jeep mod...

This Omix thermostat has a 180 degree opening temperature and is a steel replacement for the factory part. It replaces OE 83501426 and is intended ...

This Omix pinion oil seal is a replacement for Dana 30 and Dana 44 axles. It is an OE style, direct fit part with a limited 5 year warranty.Fitment...

This 25mm body plug has several uses, including a firewall plug and an interior door shell plug. It is sold individually and replaces OE 55257380AD...

This Omix trim panel screw measures .164in-15 x 1.25in. It is used to retain interior quarter trim panels, the door weather strip at the A pillar, ...

This Omix oil pan gasket is a one piece molded rubber replacement. It is listed for 4.0 and 4.2 liter engines and replaces OE 53007568.Fitment: 72-...