Artec Industries

ARTEC JL/JT A-pillar Dual LED Cube Light Mounts Artec Industries is excited to announce our new JL Light Bar Mount for two cube (aka dually, D-ser...

Fits TJ, LJ, XJ, MJ, ZJ and TJ/LJ Rubicon 44 These heavy duty gussets are designed to take serious abuse and reinforce your front 30 or Rubicon 44 ...

This UCA bracket is intended to replace the weak factory Upper Control Arm bracket from the factory on the passenger side front axle of a TJ, LJ, X...

Rivnut Tool with Hardware Our simple Rivnut installation tool makes installing those rivet nuts (threaded insert) easy and quick. No need for $100...

Miniature anodized aluminum license plate bolt can be used to replace existing bolts to provide extra illumination where needed. Sold individually,...

This heavy duty and light weight truss system is designed to take serious abuse and reinforce your front 30 or 44 TJ/LJ axle. The 1/4" thick truss ...

Fits TJ, LJ, XJ, MJ, ZJ, JK, and JKU Truss/Swap Kits Used to replaced worn polyurethane bushings for upper control arms. Passenger and Driver Side ...

60 Kingpin Axle HIGH STEER ARP STUD Kits 220,000 psi tensile strength Fit 1" - 1.5" thick arms These are fine thread on both ends tapered nuts 5 st...

Do you have bent and mangled factory lower control arm brackets? Its no surprise since they are practically made of sheet-metal. These HEAVY DUTY b...

JL/JT Inner C Gussets These heavy duty inner C gussets are designed to take serious abuse and reinforce your front Dana 30 or 44 JL or JT Inner C's...

Jam Nut for 1.25 inch 12 threads per inch (fine thread)rod ends. This nut in combination with a threaded tube insert will prevent rod ends from loo...

This Link Mount is designed to mount on a flat surface such as a truss. They are CNC cut and bent from 1/4" thick mild steel. The bend strengthens ...

Jam Nut for 7/8 inch 14 threads per inch (fine thread) rod ends. This nut in combination with a threaded tube insert will prevent rod ends from loo...

All the hardware you need to replace all the clip based hardware on your front and rear fender flares when you do a Fender Chop (separate the top h...

2.625" mounting width with 9/16" bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size...

Complete your 1 Ton Swap off by providing the JK computer correct data and eliminating codes and limp mode issues. Kit includes ABS Sensor Mount a...

~(4 lbs. 6X6X6)~ Lower Link Axle Brackets 3 Inch 10 Degree Pair Artec Industries

~(18.5 lbs. 1X1X1)~ Crossover Weld-On High Steer Arms Superduty Knuckle 05 Plus Artec Industries

***Discontinued***~(13 lbs. 24X4X4)~ JK Front Axle Truss For Rock Krawler 3 Link Systems Dana 44 Artec Industries

~(39 lbs. 42X9X6)~ JK HD Crossmember W/Link Mounts 07-11 Wrangler JK Artec Industries

***Discontinued***Jeep JL Full Bellypan 18-20 Wrangler JL 4 Door 3.6L Steel Artec Industries

~(80.1 lbs. 72X18X5)~ JK Under Armor 4 Door Bellypan Kit 12-17 Wrangler JK Unlimited Artec Industries

Shield your pinion against the elements with the exquisite Artec Industries 14 Bolt Pinion Guard. Fashioned from durable 3/8" mild steel, it endure...

~(4 lbs. 7X6X4)~ Jeep TJ Stock Tracbar Bracket Replacement 97-06 Wrangler For TJ Front Axle Artec Industries

~(11.4 lbs. 8X8X5)~ JK Rear LCA Brackets W/Skids Artec Industries

JK 1 Ton 14 Bolt Factory Disc ABS Kit Tone Ring 52 Tooth Artec Industries

~(3.5 lbs. 8X5X4)~ JK Heavy Duty Stock Tracbar Bracket Artec Industries

~(4.5 lbs. 6X6X6)~ Lower Link Axle Brackets 3 Inch 0 Degree Pair Artec Industries

This panhard mount is for use with any 3-link or 4-link scenario. Designed for joints that have a 1.75" mounting width such as 3/4" and 7/8"x3/4" r...

~(2.5 lbs. 6X6X6)~ Jeep TJ Adjustable Truss Upper Link Mount 97-06 Wrangler TJ/TJ Unlimited 2.63 Inch Wide Single Artec Industries

~(18 lbs. 11X5X5)~ Crossover Weld-On High Steer Arms 99-04 Superduty Artec Industries

~(0.5 lbs. 7X4X2)~ Short 7/8 Inch High Misalignment Spacers SS 3/4 Inch Pair Artec Industries

This kit includes one PREMIUM JMX 1.25" -12tpi Chromoly rod end with 1.0" bore, one jam nut, one WRENCH FLAT tube adapter for 1.5 ID -2.0 OD tubing...

Artec Industries is excited to announce the ZJ 8.8 Axle Swap Kit. This heavy duty truss and bracket system is designed to take serious abuse and re...

These spacers are great for using any heim that has a 3/4" bore and installing in a location that has a bracket width of 2.625" that is commonly fo...

Fits TJ, LJ, XJ, MJ, ZJ and TJ/LJ Rubicon 44 When used with an Artec 30 Truss, or Rubicon 44 Truss, this bracket provides an accurate location for ...