Steer Smarts
Steer Smarts builds the Yeti XD steering line for lifted Jeeps: drag links and tie rods with 30mm 2-1/2 ton ball joints, steel on steel bearings, 1 1/4 inch rolled threads at the adjusters and ends, and powder coat over E-coat.
On HighLift Off-Road the range covers Yeti XD drag links (top mount, no drill top mount and versions with the Griffin XD attenuator), tie rods and adjuster sleeves, including Pro-Series aluminum sleeves, adjustable track bars, track bar brackets and clamps, aluminum stabilizer brackets, steering stabilizers, bushing kits and sway bar end links. Replacement boots, bellows, taper sleeves and washers keep a Yeti XD setup in service. Parts are listed for the Jeep Wrangler JK and JL and Gladiator JT, with a few for the Ford Bronco (2021+) and Ram 2500 and 3500.
A top mount drag link needs lift: at least 3 to 3.5 inches on a JK and 4 to 4.5 inches on a JL or JT, with the correct bump stop, plus a track bar relocation bracket to keep the track bar and drag link parallel. Steer Smarts recommends 17 inch or larger wheels. JL and JT tie rod sleeves come in Rubicon and non-Rubicon versions, track bars are listed front or rear, and the Griffin XD comes with a black or red bellow.
Not sure it fits? Call 513 285-4000 or email customerservice@highliftoffroad.com and we'll check it.
Related: Steering | Track Bars | Steering Stabilizers | Sway Bars, Links & Disconnects