Military Discount | GOV X

When it comes to changing axles in a leaf sprung rig you want to get it right the first time, and forget about it.  Like all of our products, they ...

This is our RCI 2161A fuel cell mounting bracket, this is an ideal option if you are putting a fuel cell in the back of your Jeep for a wheelbase s...

Our TJ, LJ, MJ, XJ, and ZJ, front upper control arm bracket gusset is designed to reinforce the factory upper control arm bracket on your front Dan...

Our safety high misalignment spacer is designed for applications with a heim joint mounted in single shear, it is perfect for steering applications...

Our single poly bushing kit comes with two bushings and one inner sleeve.  The inner sleeve is 2 inches wide and has a bore of 5/8 inch which gives...

Our 1/4" offset shackle allows you to have a difference of a 1/2" between your leaf spring and spring hanger. These shackles are laser cut from 3/8...

Repair Weld Washers are intended to repair, and reinforce damaged or deformed mounting holes in bracketry. Drill out the damaged hole to fit the se...

Weld on double shear high steer arms are the best way to add crossover steering to a Superduty Ford ball joint Dana 60. This kit ties into the fact...

We understand that not everyone wants to pull everything off of their brand new JL, so we met you in the middle with this winch mount. This winch m...

The Ford Dana 60 flat top truss is ideal for mounting 4 link bracketry to your axle while also adding unsurpassed durability. This kit does require...

Spring Perches are not a one size fits all item. These perches are specially made for a Rockwell square 3 ½” Axle Tube applications and are bent ...

Barnes 4WD is proud to offer our Jeep TJ OEM Rear Axle Bracket kit. This kit comes complete with all the brackets needed to replace the rear brack...

If you’re looking for maximum strength, durability, longevity, versatility, with an extended shank choose our magnum series heat-treated chromoly 3...

If you have damaged your thin factory shock bracket while off road on your Jeep JK or JKU and are looking for a replacement. These brackets are cut...

If you are looking to add some strength and stiffness to you Jeep TJ or LJ Wrangler Rubicon Dana 44, this is the axle truss for you. This truss kit...

If you have a JK with a damaged front axle coil spring bucket, or you're looking to beef up your stock axle this is the upgrade for you! Piece toge...

If you have lifted you 2007-2018 Jeep Wrangler JK or JKU and want to correct the roll center to minimize body roll, this is the track bar bracket t...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

Looking to add strength to your JL Rubicon front axle or Jeep JT Gladiator? This is the axle truss for you. Barnes4wd has designed an axle truss to...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

If you are building a custom 3 link front suspension for your Jeep Wrangler JK or JKU, this 3 link cross member is an excellent starting point.  We...

If you are looking to add cross over steering, and high steer to your 2009-2016 Superduty Dana 60 axle this kit has all of the parts you will need....

Our Barnes 4WD Cage Tie In Bracket is perfect for any fabricator looking to add strength to their roll cage. Our universal cage tie in bracket is d...

Are you building a custom bumper for your rig, or do you want to add a bull bar to your existing bumper? Then this is the product for you. This bul...

This bracket is a perfect addition to any one wanting to put one of our Jeep TJ Bolt On Skid Plate in a Jeep TJ/LJ Rubicon. This bracket is designe...

We designed our Jeep TJ, or LJ Ford Sterling 10.25 or 10.5 swap kit to make it easy for you to put a one ton Sterling axle in the back of your 1997...

Looking to add strength to your Jeep JL Rubicon rear axle? Then this is the axle truss for you. Barnes4wd has designed an axle truss to strengthen ...

Putting a 2005-up Ford Superduty Dana 60 front axle under your vehicle? Using the factory bushing mounts on the Superduty, this kit will make swapp...

This is a replacement accordion boot for our GM 1 Ton Tie Rod Ends. When the inevitable happens and your tie rod end boots starts cracking and leak...

This is our universal heavy duty 3/4" DIY Drag Link Kit.  This kit uses 3/4" Chromoly Heims and sets you up to run 5/8" bolts at the knuckle and pi...

Barnes4wd is proud to introduce our Single Jerry Can Mount. This mount is designed to work with a Scepter 5 Gal can and a metal nato style jerry ca...

In situations where direct replacements are not available these can be a great solution. Providing a solid pre-bent mount with enough material for ...

 Increase the strength and durability or your axle with this axle truss system. Compatible with 2020 - Current Jeep JT Rubicon Rear Axles  Welding...

Rather it’s in the race rig, trailer, or garage, fluid storage is always a challenge. This bracket incorporates passive retention into the design, ...

WELDERS KIT KEY FEATURES A great DIY welding project. Laser Cut and CNC bent here in North Carolina. The same proven designs we have sold and r...

Looking to add a more finished look to your JL Wrangler? Then this product is for you. Barnes 4wd JL pinch weld covers are the perfect addition to ...