Barnes 4WD

Theses DOM sleeves are perfect for replacing worn out shock DOM sleeves. They come gold zinc plated and measure .625" OD .5" ID 1.5" Long.  

Our TJ transmission mounting bracket is designed to help mount your Jeep's transmission to one of our Jeep TJ skid plates. This Bracket is cut from...

Barnes 4wd is proud to introduce our Superduty Dana 60 axle 7075-T6 aluminum high steer tie rod kit!  This kit is designed to be used with our high...

We designed our Jeep JL/JT Superduty Dana 60 swap kit to make it easy for you to put a Dana 60 from a 2005-up Ford Superduty in the front of your 2...

This kit will insure that you get just the right parts to build your Panhard or Trackbar. Heims are 7/8 shank and you will run a 5/8 bolt on both e...

This kit includes everything you need to replace the nuts and washers on one U-bolt. This kit is only verified to work on our 5/8" U-bolts. May not...

This kit is designed to mount a double ended ram to a Super Duty Dana 60 without using a truss or skid system. The Bracket centers the ram on the a...

If you’re looking for maximum strength, durability, longevity, versatility, with an extended shank choose our magnum series heat-treated chromoly 3...

ENDURO JOINT REBUILD VIDEO When Barnes 4WD designed the rebuild-able Offset Enduro suspension joint we combined the best materials, the best manuf...

This is a replacement ball for the large, 1.25-12 shank Enduro joints or our Weld Flex Joint. This ball has a mounting width of 2-5/8" and a 9/16"...

This is a complete, high quality parallel 4 link suspension kit with all the parts you need to install a parallel four link suspension on your rig ...

Need some DOM for your parallel 4 link but do not want to buy full sticks of it locally? Let us cut just what you need and save you some money.Thi...

Parallel Four Link Grade Eight Hardware 9/16"-12 x 4" Includes Eight Grade Eight 9/16"-12 x 4" Yellow Zinc Bolts, Eight 9/16"-12 Nylock Nuts, Two G...

Looking for a heavy duty replacement front axle trackbar bracket for your Jeep JL Wrangler or JT Gladiator? Then this is the bracket for you! The b...

If you are looking to replace your damaged thin factory Jeep JL or JT front lower control arm brackets or if you are looking for a little more peac...

If you have a JL or JT with a damaged front axle coil spring brackets, or you're looking to beef up your stock axle this is the upgrade for you! Pi...

If you have damaged your thin factory shock bracket while off road on your Jeep JL Wrangler or JT Gladiator and are looking for a replacement. Thes...

If you have damaged your low hanging factory Jeep JL Rear Lower Control Arm Shock Brackets. Then this is the part for you! These brackets are desig...

If you are looking for the ultimate in protection for the rear lower control arm mount on your Jeep Wrangler JL, you have found them with our JL re...

If you have a JL with a damaged coil bracket, or if you're looking to beef up you're stock bracket this is the upgrade for you! Piece together desi...

Looking for a simple and clean way to run wiring or brake lines? Then this is the product for you! Simply weld these to your links or cage and run ...

Looking to add some protection to the underside of your Jeep Cherokee? Barnes 4WD has you covered with our Jeep Cherokee Transfer Case Skid! CNC cu...

This kit includes all the parts you need to build a poly bushing joint with a 2 inch mounting width and a 5/8 inch bolt hole.  This combo is great ...

This heavy duty sleeve is a product that we designed for folks that want to run our TJ, JK, XJ, JL, JT axle swap kits with a 9/16 inch bolt on thei...

If you are looking to convert your 2005-Up Super Duty Dana 60 knuckles to accept a 3/4 inch bolt for heim steering we have you covered.  The knuckl...

Barnes 4WD Behind the Axle High Clearance shock mount is one of the strongest and one of the most versatile shock mounts we have to offer. These br...

While running anti wrap leaf spring mounts under the axle, U bolt plates and U bolts get damaged and hung on obstacles off road. To solve this issu...

If your looking to replace your damaged thin factory Jeep JT rear frame sway bar bracket or if your looing for a little more peace of mind on the t...

Slotted zip tie tabs are ideal for line and cable management on a chassis. This is a simple way to mount a fuel line, brake line or electric cable ...

Combination brackets are a go to for many builders because of their strength and ease of installation. With this option the lower and upper chassis...

Looking to add the ultimate protection to your low hanging shocks on your Bronco? Then this is the product for you. We have designed these shock sk...

Our Barnes4wd Bronco A Arm Skid provide the ultimate protection to your OEM aluminum lower A arms.  We designed our A arms skids fully protect the ...

This bracket set is designed to replace the OEM rear axle side shock brackets on Jeep JT Gladiator 2020-Current. This set is constructed of 1/4" st...

If your looking to add protection to your rear frame lower control arm mount on your Jeep Wrangler JK, then look no further. Our bolt on lower cont...

If your looking to add protection to your front frame lower control arm mount on your Jeep Wrangler JK, then look no further. Our bolt on lower con...

When Barnes 4WD designed the rebuild-able Enduro suspension joint we combined the best materials, the best manufacturing processes and the best ste...

One of the main issues with building out an XJ crawler is the mounting integrity of the chassis. This track bar brace system solves this issue by r...

Easily Increase the strength of lower links, trailing arms, tube armor and steering. Intended for 1.5”- 2” OD Tubing 3/16” Steel Construction 54” ...

If you are looking for a longer wheelbase for your Jeep Wrangler JK for an excellent departure angle and greater offroad performance, we have you c...

If you are looking to convert your Jeep Wrangler TJ or LJ to a long arm link suspension we just made the process a whole lot easier.  Barnes 4WD is...

This skid is designed to be used in our XJ front 3 link long arm kit. It will fit an 1984-2001 Jeep XJ with an AW4 automatic transmission and NP231...

Barnes4wd is proud to introduce our TJ Boatside Body Mounts 1.25" body lift. These body mounts are designed to replace the low hanging weak stock b...

Looking to add storage to your Bronco? Then the Barnes 4wd Bronco Center Console Molle Panels are perfect for you. Our molle panels are designed to...

Our Dana M220 Rear Axle Skid Plate is designed to add much needed protection to your Dana M220 rear axle. The skid plate is designed to give the ax...

Easily add clearance for larger tires by removing the lower portion of your factory Rubicon fender flare and light assembly. With several options f...

These adjustable inner frame link mount brackets are made to be welded directly to your frame. This is a super strong CNC bent, Laser cut bracket m...

These mounts are made to be welded directly to your tubing. This is a super strong CNC bent, laser cut bracket made to take serious abuse. Perfect ...

When Barnes 4WD designed the rebuild-able Enduro suspension joint we combined the best materials, the best manufacturing processes and the best ste...