Barnes 4WD

Barnes 4wd square tube inserts will help you keep the overall cost down on your link project. Available in left and right hand threadings, these 7/...

If you are looking to remove the spare tire from your Jeep Wrangler JL, or you need a spot to put your licences plate and backup camera after insta...

If you’re looking for maximum strength, durability, longevity, versatility, with an extended shank choose our magnum series heat-treated chromoly 1...

If you’re looking for maximum strength, durability, longevity, versatility, with an extended shank choose our magnum series heat-treated chromoly 1...

If you’re looking for maximum strength, durability, longevity, versatility,  with an extended shank choose our magnum series heat-treated chromoly ...

If you’re looking for maximum strength, durability, longevity, versatility, with an extended shank choose our magnum series heat-treated chromoly 7...

If you’re looking for maximum strength, durability, longevity, with an extended shank choose our magnum series heat-treated chromoly 7/8" x 3/4"  h...

This is a variety pack of our Barnes4WD Weld Washers perfect for any fab shop. The pack comes with Weld Washers, Repair Weld Washers, and Threaded ...

Looking to build control arms with maximum misalignment and articulation? Barnes 4WD has the solution. Our rebuild-able weld on flex joint is the d...

We put this kit together to make it easier to disassemble and reassemble your Enduro joints.  This kit includes 2 sleeves, 1 bolt, 2 washers, and 1...

This is a complete lower control arm kit for the do it yourself jeep enthusiast. You will receive everything you need to build your own set of TJ L...

This is a complete Front Upper Control Arm kit for the do it yourself jeep enthusiast. You will receive everything you need to build your own set o...

This is a complete rear upper control arm kit for the do it yourself jeep enthusiast. You will receive everything you need to build your own set of...

We designed this rear axle truss with 3 link mount for the folks that are looking to take their 2007-2018 Jeep Wrangler JK or JKU to the next level...

When Barnes 4WD designed the rebuild-able Offset Enduro suspension joint we combined the best materials, the best manufacturing processes and the b...

When Barnes 4WD designed the rebuild-able Enduro suspension joint we combined the best materials, the best manufacturing processes and the best ste...

Bumpers are made to order and are subject to a 4-6 week lead time once order is placed. Barnes4WD is proud to introduce our brand new Jeep Wrangler...

High Misalignment spacer reduce a 3/4 inch bore to a 10 mm bolt hole. Mounting width when installed is 2 inches with 70° of total misalignment (35°...

Keep your heim joint or rod end secure with our 1/2" safety washers!  These washers will prevent the ball of a  heim joint in a single shear applic...

We designed our Jeep JK GM 14 bolt swap kit to make it easy for you to put a one ton GM 14 Bolt in the back of your 2007-2018 Jeep JKU or JK.  This...

If you are looking to convert you Jeep Wrangler JK or JKU to a 3 link suspension we have completed another piece of the puzzle for you with this fr...

If you are looking at building a custom 3 link suspension for the rear of your Jeep Wrangler JK or JKU this bracket will give you the perfect locat...

If you are looking at building a custom 3 link suspension for the rear of your Jeep Wrangler JK or JKU this bracket kit will give you the perfect l...

If you are looking to add cross over steering, and high steer to your 2017-Up Superduty Dana 60 axle this kit has all of the parts you will need. T...

If you have a JK with damaged front upper control arm frame brackets, or you're looking to beef up your frame this is the upgrade for you! Piece to...

If you have a JK with damaged rear lower control arm frame brackets, or you're looking to beef up your frame this is the upgrade for you! This prod...

If you have a JK with damaged rear lower control arm frame brackets, or you're looking to beef up your frame this is the upgrade for you! This prod...

If you have lifted your Jeep Wrangler JK, JL, Jeep Gladiator, or changed tire sizes, you may need to limit the up travel of your rear suspension wi...

If you have lifted your Jeep Wrangler JK, JL, Jeep Gladiator, or changed tire sizes, you may need to limit the up travel of your rear suspension wi...

This is what we see as the standard Panhard / Trackbar bracket. It has three 1/2 inch bolt holes with mounting positions at, 5.5", 6.5", & 7.5"...

DOM can be used for Roll Cages, Link Suspension's, Steering Linkages and Cross Members. No matter what you need DOM for Barnes 4wd has it for your...

This is a replacement retaining washer for the large, long shank series, 2-5/8" mounting width Enduro joints and our weld on flex joint.  This prod...

This is a replacement snap ring for the large, long shank, 2-5/8" mounting width Enduro joints and our weld on flex joint.

Looking for a strong way to mount an antenna on your Jeep JK? Then this is the bracket for you! Designed to bolt directly to your Jeep Wrangler Tai...

This kit includes all of the needed components to build the rear upper link for our Jeep JK 3 link suspension system.  This kit requires welding fo...

This kit includes all the needed components to build the front lower links for our Jeep JK 3 link kit.  Cutting the tubing to length, and welding i...

This kit includes all of the required components to build a front upper control arm for our Jeep JK 3 link kit.  This kit will require cutting the ...

These flat bottom link mounts are made to be welded directly to any flat surface. This is a super strong CNC bent, Laser cut bracket made to take s...

This is the bent and coped D.O.M. tubing that is needed to make the rear upper link for a Jeep JK 3 link suspension system, it is manufactured from...

This is a replacement liner for the large, long shank, 2-5/8" mounting width Enduro joints and our weld on flex joint.  These are sold individually...

This is a replacement liner for the small, 7/8 inch long shank, 2 inch and 2-5/16 inch mounting width Enduro joints.  These are sold individually, ...

This is a replacement snap ring for the small, 7/8-14 long shank, Enduro joints.

This is a replacement retaining washer for the small, 7/8-14 long shank series, Enduro joints.  This product is sold individually.

This is a replacement flush style grease fitting with an M6-1.0 thread for our Enduro joints. These are not compatible with the spanner or V 2.0 en...

High Misalignment spacer reduces a 3/4 inch bore to a 9/16 inch or 14mm bolt hole. Mounting width when installed is 2-5/16 inches with 56° of total...

We put this kit together for the folks that are looking to build custom adjustable rear lower control arms for their Jeep Wrangler JK and JKU.  Thi...

We put this kit together for the folks that are looking to build custom adjustable front lower control arms for their Jeep Wrangler JK and JKU.  Th...

We put this kit together for the folks that are looking to build custom adjustable front upper control arms for their Jeep Wrangler JK and JKU.  Th...