Military Discount | GOV X

Heavy Duty 3/4 - 16 Tube Inserts Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength...

Misalignment spacer for 1/2 inch bore. 1 1/2" mounting width when installed on a 5/8 x  1/2 heim with 24° of total misalignment (12° in either dire...

This is what we see as the standard Panhard / Trackbar bracket. It has three 5/8 inch bolt holes with mounting positions at, 5.5", 6.5", & 7.5"...

Finally, an all bolt on Disc Brake bracket for the GM 14 bolt single rear wheel full float axles manufactured before 1988, which does not use space...

These inner frame link mount brackets are made to be welded to the inside of your frame. These brackets are made with strength built in due to the...

This is one of our most versatile shock tabs, it can be used for many other applications. This tab is intended to be welded to any flat surface. Th...

Our 1/4" offset shackle allows you to have a difference of a 1/2" between your leaf spring and spring hanger. These shackles are laser cut from 3/8...

Spring Perches are not a one size fits all item. These perches are specially made for Dana 44 applications they are cut for a 2 3/4" axle tube and ...

Spring Perches are not a one size fits all item. These perches are specially made for Early Jeep Narrow width Perches (CJ & M Series) applicati...

Coil springs are a very cost effective spring to use when you are building a link suspension system. They are widely used on many different vehicl...

These GM U-Bolt plates are made for 2 1/2" width Leaf Springs, if the center locating pin hole is used it will fit a 2 3/4"-3 5/8" axle tube. Thes...

The Barnes 4WD Cross Member mounting set comes with everything you need to make a cross member both rigid and still isolate vibration. Out kit is m...

1 1/4"-12 Right Hand Threads per inch jam nut or lock nut.  This will work with our 1 1/4" Heim joints.  Zinc plated, sold individually.

When it comes to changing axles in a leaf sprung rig you want to get it right the first time, and forget about it. Like all of our products, they ...

When it comes to changing axles in a leaf sprung rig you want to get it right the first time, and forget about it. Like all of our products, they ...

These Jeep U-Bolt plates are made for 2 1/2" width Leaf Springs, if the center locating pin hole is used it will fit a 2 3/4"-3 5/8" axle tube. Th...

This is our Chevy front Dana 60 specific u-bolt plate. The passenger side plate is laser cut from 1/2" plate steel, the holes are drilled on one si...

This is our Dodge front Dana 60 specific u-bolt plate. These Dodge Dana 60 plates are for the Dodge axle that the two studs for the u-bolt plate m...

1 1/4-12 Right Handed Threaded shank rod end, 1" bore, ultimate radial static load rating -76,200 lbs.

This truss is made just for your Dana 60. This truss is loosely based around the shape of the older Dana 60's (pre-superduty). Our truss is made fr...

7/8-14 Threaded shank rod end, 7/8 bore, ultimate radial static load rating -45,051 lbs.

Axle Truss Brackets are a great addition to our lineup. These mounts are made to be welded on top of our axle truss. This is a super strong CNC ben...

Barnes 4WD Single Optima Group 34/78 Battery Box is a great solution to keep your battery secure even in the roughest terrain! Our battery boxes ar...

Barnes 4wd Jeep Skid Plates are made to protect the belly of your Jeep and give you a smooth surface to slide on. We offer our Skid plates in three...

Barnes 4wd Jeep Skid Plates are made to protect the belly of your Jeep and give you a smooth surface to slide on. We offer our Skid plates in thre...

1/4" thick construction. Pre bent and ready to weld together and to the axle. Thicker than the factory cover for a final repair. This cover w...

Barnes 4wd Jeep Skid Plates are made to protect the belly of your Jeep and give you a smooth surface to slide on. Each Skid plate has a 1.5" lip on...

Spring Perches are not a one size fits all item. These perches are specially made for Dana 80 applications they are cut for a 4" axle tube and are ...

Spring Perches are not a one size fits all item. These perches are specially made for a AAM 11.5 applications they are cut for a 4" axle tube and a...

Our coil spring towers are the best solution you will find for mounting coil springs to the front of your project. These Coil towers are made for ...

These 4" Axle Tube U bolt plates are made for 2 1/2" width Leaf Springs, if the center locating pin hole is used it will fit a 3 7/8"-4 3/8" axle t...

Some things just have to be double shear and these are two applications that are a must! These brackets provide a secure method of attaching seat ...

Barnes 4WD behind the axle shock bracket is one of the most versatile shock brackets that we make. This shock brackets allows you to orient the sh...

Barnes 4WD Frame shock towers are great way to get your Air shocks, Coilovers or ORI struts mounted to your frame. These shock towers are made fro...

Bumpers are made to order and are subject to a 4-6 week lead time once order is placed. The TJ, LJ rear Tail Plate Bumper provides maximum departur...

Our axle swap combo's are the best of the best. Our SUA swap combo will allow you to run your u bolts with the nuts on top so they do not get dama...