Control Arms

This is the kit that has all the parts that we are always using in the shop for customers Single triangulated four links suspensions. This has all ...

Perfect for a three link or four link suspension system. These brackets are made to be welded to the side of your frame, and they have an adjustabl...

Running your joints horizontally, with our horizontal frame link bracket, can be a great option for your upper control arms. These brackets weld to...

Single Poly bushing is made to slide into any tube with a 1.5" ID. The bushing has a 1/4" shoulder and a 1" bore. These bushings are sold individua...

High misalignment spacers fit a suspension rod end and step a 7/8 inch rod end opening down to a 3/4 inch mounting bolt. Mounting width when insta...

Replacement Poly Cup for the Barnes 4WD Enduro Joint.  These cups have been Cryogenically Treated. Only compatible with: Spanner Nut Enduros and S...

Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength, our tube inserts allow for the l...

This is our universal heavy duty crossover steering kit with our super strong 7/8" heat treated chromoly heims.  This kit requires cutting the DOM ...

High misalignment spacers fit a suspension rod end and step a 1 inch rod end opening down to a 9/16 inch mounting bolt. Mounting width when instal...

These Jeep front axle upper control arm brackets are used for customers looking to build their own Jeep TJ, LJ, XJ, MJ, and ZJ Front Upper Control ...

Radius Arms are simple and they work! This bracket will allow you to mount a heim joint where the upper control arm on a radius arm suspension moun...

Economy female heat treated steel two piece rod ends are great for the builder on a budget. Thread: 1/4-28 Ball Bore for bolt: .250 Ball Width:...

Economy Heat treated steel two piece rod ends are great for the builder on a budget. Thread: 3/8-24 Ball Bore for bolt: .375  Ball Width: .5"  Load...

If you are looking for the best in a forged polyurethane joint Barnes 4wd has you covered, we designed these to be the strongest joints on the mark...

High misalignment spacers fit a suspension rod end and step a 1/2 inch rod end opening down to a 10 millimeter mounting bolt. Mounting width when i...

If you have a diesel and are experiencing wheel hop, building a pulling truck, or just looking for the strongest traction bars that you can get, Ba...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

This tube insert is designed to be used with a 7/8" heim joint in tubing with a 1 1/2" I.D.  This tube insert differs from our standard insert beca...

This tube insert is designed to be used with a 7/8" heim joint in tubing with a 1" I.D.  This tube insert differs from our standard insert because ...

This tube insert is designed to be used with a 3/4" heim joint in tubing with a 1" I.D.  This tube insert differs from our standard insert because ...

This tube insert is designed to be used with a 3/4" heim joint in tubing with a 1" I.D.  This tube insert differs from our standard insert because ...

Our Jeep TJ rear lower control brackets are designed to go in place of your factory brackets and are a great option when swapping a Dana 60 or F...

If you are looking to replace your damaged thin factory Jeep JK front lower control arm brackets or if you are looking for a little more peace of m...

Wide high misalignment spacer reduces a 3/4 inch  bore to a 9/16 inch bolt hole, mounting width when installed is 2 5/8 inches with 60° of total mi...

Wide high misalignment spacer reduces a 3/4 inch bore to a 5/8 inch bolt hole, mounting width when installed is 2 5/8 inches with 52° of total misa...

The rear shock mounting brackets on the Jeep JKs are the lowest point on the rear axle, they are made from flimsy sheet metal and are prone to dama...

This is a complete, high quality 3 link suspension kit with all the parts you need to install a three link suspension on your rig at home.  All the...

This is a complete, high quality 3 link suspension kit with all the parts you need to install a three link suspension on your rig at home.  All the...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

Barnes offers the most affordable high-quality weld in bungs on the market. No matter the job, have some Barnes tube inserts handy! Built race styl...

Barnes 4wd square tube inserts will help you keep the overall cost down on your link project. Available in left and right hand threadings, these 1 ...

Misalignment spacer for 1 inch bore. Mounting width when installed is 2 5/8 inch with 40° of total misalignment (20° in either direction). Sold Ind...

Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength, our tube inserts allow for the ...

Heavy Duty 3/4 - 16 Tube Inserts Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength...

Heavy Duty 1/2 - 20 Tube Inserts Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength...

This tube insert is designed to be used with a 3/4" heim joint in tubing with a 1" I.D.  This tube insert differs from our standard insert because ...

This tube insert is designed to be used with a 3/4" heim joint in tubing with a 1" I.D.  This tube insert differs from our standard insert because ...

This tube insert is designed to be used with a 7/8" heim joint in tubing with a 1" I.D.  This tube insert differs from our standard insert because ...

This tube insert is designed to be used with a 7/8" heim joint in tubing with a 1 1/2" I.D.  This tube insert differs from our standard insert beca...

Heavy Duty 7/8 14 Tube Inserts Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength...

Barnes 4wd square tube inserts will help you keep the overall cost down on your link project. Available in left and right hand threadings, these 7/...

Heavy Duty 7/8 14 Tube Inserts Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength...

7/8"-14 threaded shank, ¾ bore hiem joint, Ultimate radial static load -55,692lbs. Part NumbersMPN B4WXML12-14

3/4"-16 Threaded Shank, ¾ Bore, Ultimate Radial Static Load -28,081 lbs. Part NumbersMPN B4WXML12

3/4"-16 Threaded Shank, 5/8 Bore, Ultimate Radial Static Load -40,572 lbs. Part NumbersMPN B4WXML10-12

7/8"-14 Threaded Shank, 7/8 Bore, Ultimate Radial Static Load -45,051 lbs. Part NumbersMPN B4WXML14

5/8"-18 Threaded Shank, 5/8 Bore, Ultimate Radial Static Load -17,995 lbs. Part NumbersMPN B4WXML10

1/2"-20 Threaded Shank, 1/2 Bore, Ultimate Radial Static Load -16,238 lbs. Part NumbersMPN B4WXML8