Control Arms

This is a complete Front Upper Control Arm kit for the do it yourself jeep enthusiast. You will receive everything you need to build your own set o...

This is a complete rear upper control arm kit for the do it yourself jeep enthusiast. You will receive everything you need to build your own set of...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

ENDURO JOINT REBUILD VIDEO When Barnes 4WD designed the rebuild-able Offset Enduro suspension joint we combined the best materials, the best manuf...

When Barnes 4WD designed the rebuild-able Offset Enduro suspension joint we combined the best materials, the best manufacturing processes and the b...

When Barnes 4WD designed the rebuild-able Enduro suspension joint we combined the best materials, the best manufacturing processes and the best ste...

These are the brackets that you need if you are replacing your factory rear axle upper control arm brackets on your Jeep TJ, this kit includes the ...

High misalignment spacers fit a suspension rod end and step a 3/4 inch rod end opening down to a 10 mm mounting bolt. Mounting width when installed...

Keep your heim joint or rod end secure with our 1/2" safety washers!  These washers will prevent the ball of a  heim joint in a single shear applic...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

If you are looking to convert you Jeep Wrangler JK or JKU to a 3 link suspension we have completed another piece of the puzzle for you with this fr...

If you are looking at building a custom 3 link suspension for the rear of your Jeep Wrangler JK or JKU this bracket will give you the perfect locat...

If you are looking at building a custom 3 link suspension for the rear of your Jeep Wrangler JK or JKU this bracket kit will give you the perfect l...

If you have a JK with damaged front upper control arm frame brackets, or you're looking to beef up your frame this is the upgrade for you! Piece to...

If you have a JK with damaged rear lower control arm frame brackets, or you're looking to beef up your frame this is the upgrade for you! This prod...

If you have a JK with damaged front lower control arm frame brackets, or you're looking to beef up your frame this is the upgrade for you! Piece to...

If you have a JK with damaged rear lower control arm frame brackets, or you're looking to beef up your frame this is the upgrade for you! This prod...

If you are looking to build a custom suspension for your coil sprung Ford Superduty Dana 60 axle, this is the kit that you need to be able to attac...

If you are looking to add an upper triangulated 4 link suspension to your vehicle this bracket kit will package all of your frame side mounts in on...

This is a replacement snap ring for the large, long shank, 2-5/8" mounting width Enduro joints and our weld on flex joint. Part NumbersMPN 206RCRI

This kit includes all of the needed components to build the rear upper link for our Jeep JK 3 link suspension system.  This kit requires welding fo...

This kit includes all the needed components to build the front lower links for our Jeep JK 3 link kit.  Cutting the tubing to length, and welding i...

This kit includes all of the required components to build a front upper control arm for our Jeep JK 3 link kit.  This kit will require cutting the ...

These flat bottom link mounts are made to be welded directly to any flat surface. This is a super strong CNC bent, Laser cut bracket made to take s...

This is the bent and coped D.O.M. tubing that is needed to make the rear upper link for a Jeep JK 3 link suspension system, it is manufactured from...

This is a replacement flush style grease fitting with an M6-1.0 thread for our Enduro joints. These are not compatible with the spanner or V 2.0 en...

High Misalignment spacer reduces a 3/4 inch bore to a 9/16 inch or 14mm bolt hole. Mounting width when installed is 2-5/16 inches with 56° of total...

We put this kit together for the folks that are looking to build custom adjustable rear lower control arms for their Jeep Wrangler JK and JKU.  Thi...

We put this kit together for the folks that are looking to build custom adjustable front lower control arms for their Jeep Wrangler JK and JKU.  Th...

We put this kit together for the folks that are looking to build custom adjustable front upper control arms for their Jeep Wrangler JK and JKU.  Th...

We put this kit together for the folks that are looking to build custom adjustable rear upper control arms for their Jeep Wrangler JK and JKU.  Thi...

If you are looking to install our Jeep JK 3 link suspension system and you do not have a truss on your axle, this is the perfect solution for your ...

If you are looking to install our Jeep JK 3 link suspension system and you do not have a truss on your axle, this is the perfect solution for your ...

If you are building a suspension with a Dana 60 axle, attaching a lower control arm bracket to the short side tube for your 4 link or 3 link suspen...

If you are looking to add strength to your Jeep Cherokee? Then these are the frame stiffeners are for you! We have designed these unibody stiffener...

If you’re looking for maximum strength, durability, longevity, versatility, with an extended shank choose our magnum series heat-treated chromoly 3...

If you’re looking for maximum strength, durability, longevity, versatility, with an extended shank choose our magnum series heat-treated chromoly 3...

ENDURO JOINT REBUILD VIDEO When Barnes 4WD designed the rebuild-able Offset Enduro suspension joint we combined the best materials, the best manuf...

This is a replacement ball for the large, 1.25-12 shank Enduro joints. This ball has a mounting width of 2-5/8" and a 5/8" bolt hole. This product ...

This is a replacement ball for the large, 1.25-12 shank Enduro joints or our Weld Flex Joint. This ball has a mounting width of 2-5/8" and a 9/16"...

This is a replacement ball for the small, 7/8-14 shank Enduro joints. This ball has a mounting width of 2" and a 7/16" bolt hole. This ball is prim...

This is a replacement ball for the small, 7/8-14 shank Enduro Joints. This ball has a mounting width of 2-5/16" and a 9/16" bolt hole. This ball is...

This is a complete, high quality parallel 4 link suspension kit with all the parts you need to install a parallel four link suspension on your rig ...

Need some DOM for your parallel 4 link but do not want to buy full sticks of it locally? Let us cut just what you need and save you some money.Thi...

If you are looking to replace your damaged thin factory Jeep JL or JT front lower control arm brackets or if you are looking for a little more peac...

If you have a Jeep JL with damaged rear axle upper control arm bracket, or you are looking to beef up you're stock brackets this is the upgrade for...

If you have damaged your low hanging factory Jeep JL Rear Lower Control Arm Shock Brackets. Then this is the part for you! These brackets are desig...

If you have a Jeep JL with damaged front frame upper control arm brackets, or you are looking to beef up you're stock brackets this is the upgrade ...