Barnes 4WD

When it comes to changing axles in a leaf sprung rig you want to get it right the first time, and forget about it.  Like all of our products, they ...

Need some DOM for your three link but do not want to buy full sticks of it locally? Let us cut just what you need and save you some money.This kit...

Barnes offers the most affordable high-quality weld in bungs on the market. No matter the job, have some Barnes tube inserts handy! Built race styl...

Spring Perches are not a one size fits all item. These perches are specially made for AMC 20 applications they are cut for 2 1/2" axle tube and are...

1/4" thick construction. Pre bent and ready to weld together and to the axle. Thicker than the factory cover for a final repair. This cover w...

Looking to increase the life of your suspensions joint? Then the Barnes 4wd Horizontal four Link Truss Bracket is just what you are looking for! B...

High Misalignment spacer reduces a 7/8 inch bore to a 3/4 inch bolt hole. Mounting width when installed is 2 inches with 36° of total misalignment...

Set of 1 high steer stud and nut to attach high steer arms to kingpin Dana 60 knuckles.   This stud is manufactured from 4140 chromoly for the ulti...

Barnes 4WD Single Odyssey PC1500, Group 34/78, and Group 24 Battery Box is a great solution to keep your battery secure even in the roughest terrai...

These 4" Axle Tube U bolt plates are made for 3" width Leaf Springs, if the center locating pin hole is used it will fit a 3 7/8"-4 3/8" axle tube....

If you're looking for a truss for your Ford Sterling Rear 10.25 or 10.5 axle, then our Pro Series one piece full width axle truss is the perfect so...

Our Jeep TJ, LJ rear shock mounts are designed to go in place of your factory brackets and are a great option when swapping a DANA 60 or Ford 8.8 i...

These are the brackets that you will need when swapping the rear axle in your TJ or LJ to be able to use your factory sway bar, welding is required...

Here is a product to make building your spare tire carrier a little easier and we have included all of the popular bolt patterns.  This plate in co...

Our GM 1-ton tie rod ends are manufactured to be of the highest quality. Barnes 4WD tie rod ends also go above and beyond when it comes to articula...

If you are looking to put Y-link steering on your rig then our GM 1 ton Y-link tie rod end (ES2233L) is the best option you will find anywhere.  Th...

This tube insert is designed to be used with a 7/8" heim joint in tubing with a 1 1/2" I.D.  This tube insert differs from our standard insert beca...

7/8"-14 Left Hand Threads per inch jam nut or lock nut.  This will work with our 7/8" Heim joints.  Zinc plated, sold individually.

This u-bolt eliminator kit is intended for the hard-core off road guy that wants the most clearance possible under their axles.  This kit is design...

If you are trying to make your steering clear your differential cover or other axle components, our offset heim joint may just be the answer you ar...

Looking to upgrade the front suspension to long arms on your TJ, LJ, MJ, ZJ, or XJ?  This kit has all of the parts that the do it yourself fabricat...

This is our tube clevis mount, it is a great way to add a recovery point to your tube chassis or tube bumper. These mounts are manufactured out of...

Some times a good set of leaf springs can be just a little too flexible and cause leaf spring inversion, this is when the shackle tries to flip ups...

If you are looking for a serious upgrade for the steering on your Jeep JK, this is the steering kit that you need.  This 1 ton kit uses quality hea...

These flat bottom link tabs are made to weld to any flat surface. These tabs are 3/8 inch thick steel and have a 1/2 inch bolt hole. We offer thr...

When it comes to changing axles in a leaf sprung rig you want to get it right the first time, and forget about it.  Like all of our products, they ...

This is our RCI 2161A fuel cell mounting bracket, this is an ideal option if you are putting a fuel cell in the back of your Jeep for a wheelbase s...

Our TJ, LJ, MJ, XJ, and ZJ, front upper control arm bracket gusset is designed to reinforce the factory upper control arm bracket on your front Dan...

Our safety high misalignment spacer is designed for applications with a heim joint mounted in single shear, it is perfect for steering applications...

Our single poly bushing kit comes with two bushings and one inner sleeve.  The inner sleeve is 2 inches wide and has a bore of 5/8 inch which gives...

Our 1/4" offset shackle allows you to have a difference of a 1/2" between your leaf spring and spring hanger. These shackles are laser cut from 3/8...

We designed our Jeep JK GM 14 bolt swap kit to make it easy for you to put a one ton GM 14 Bolt in the back of your 2007-2018 Jeep JKU or JK.  This...

Repair Weld Washers are intended to repair, and reinforce damaged or deformed mounting holes in bracketry. Drill out the damaged hole to fit the se...

Weld on double shear high steer arms are the best way to add crossover steering to a Superduty Ford ball joint Dana 60. This kit ties into the fact...

Important notes! - This kit does not include a lifetime warranty. Aluminum is much more elastic that DOM and will serve you better on the rocks,...

We understand that not everyone wants to pull everything off of their brand new JL, so we met you in the middle with this winch mount. This winch m...

The Ford Dana 60 flat top truss is ideal for mounting 4 link bracketry to your axle while also adding unsurpassed durability. This kit does require...

Spring Perches are not a one size fits all item. These perches are specially made for a Rockwell square 3 ½” Axle Tube applications and are bent ...

Barnes 4WD is proud to offer our Jeep TJ OEM Rear Axle Bracket kit. This kit comes complete with all the brackets needed to replace the rear brack...

If you’re looking for maximum strength, durability, longevity, versatility, with an extended shank choose our magnum series heat-treated chromoly 3...

If you have a JK with damaged rear axle upper control arm bracket, or you are looking to beef up you're stock brackets this is the upgrade for you!...

If you have damaged your thin factory shock bracket while off road on your Jeep JK or JKU and are looking for a replacement. These brackets are cut...

If you are looking to add some strength and stiffness to you Jeep TJ or LJ Wrangler Rubicon Dana 44, this is the axle truss for you. This truss kit...

If you have a JK with a damaged front axle coil spring bucket, or you're looking to beef up your stock axle this is the upgrade for you! Piece toge...

If you have lifted you 2007-2018 Jeep Wrangler JK or JKU and want to correct the roll center to minimize body roll, this is the track bar bracket t...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

If you are building a custom 3 link front suspension for your Jeep Wrangler JK or JKU, this 3 link cross member is an excellent starting point.  We...