APEX Designs USA

This innovative, patent-pending fast deflation tire valve allows you to quickly deflate your tires in a matter of seconds. Here’s how it works: Un...

Now you have an alternative to a trail rate sway bar! The airLYNX for Jeep JL/JT/JK are adjustable rate sway bar end links that give you the abilit...

BE SURE TO SELECT THE CORRECT STROKE LENGTH BEFORE CHECKING OUT SKU X02-05-002 - 8.0" Stroke SKU X02-05-001 - 10.5" Stroke Has it been too many yea...

This innovative, patent-pending fast deflation tire valve allows you to quickly deflate your tires in a matter of seconds. Here’s how it works: Un...

While it is not APEX RPV fast, it is still super quick and install is a snap! Meet the Rapid Connect Valve! Finally, a FAST screw on deflator that ...

Features: High impact DuPont glass filled nylon 66 reel guide Highly resistant to UV and chemicals 6061-t6 aluminum with wear resistant and fad...

TPMS Adapter Kit [Works with OEM Toyota/Japanese build sensors, set of 4 or 5] These work with the vehicle's OEM TPMS. Aftermarket sensors (e.g., c...

Finally! A high quality sway-bar disconnect for the Toyota 4Runner, Tacoma, FJ and GX. The APEX kwikLYNX allow you to easily disconnect and reconne...

This air chuck is specific to the Rapid Inflation Valves (RIV). NOT COMPATIBLE WITH STANDARD SCHRADER VALVES

The Apex Banjo Fitting is used to connect the Apex Braided Air Hose to the Compact Reel System. SPECS: 1/4 NPT to APEX 3/8 Braided Air Hose

The Flip to Deflate Cap offers an affordable way to quickly deflate your tires for off-road use. This handy valve stem cap features a deflator buil...

Air up FAST with the PATENT PENDING Apex Rapid Inflate Valve! You can expect sub 10 second air-up times when paired with a compressor at 120 PSI an...

Air up faster with our High Flow Chuck! While most standard clip on or or push on chucks only open the Schrader valve about 50%, our High Flow Chuc...

A through-shaft hydraulic steering ram that adds hydraulic assist to the factory electronic power steering system, engineered to work with the stoc...

A mounting bracket kit that connects a Steer Smarts Yeti XD tie rod to the Apex Through Shaft Ram steering system. Currently listed as sold out on ...

A protective skid plate designed to shield the Apex Through Shaft Ram steering component during off-road use.Fitment: Compatible with X02-10-001 &a...

A mounting bracket kit that connects Rock Jock CurrectLync tie rods and drag links to the Apex Through Shaft Ram steering system.Fitment: Verified ...

A 14mm caliper bolt kit intended for use with the Bolt-On Spindle Gusset kit. The bolts are not included in the gusset kit itself and must be purch...

A bolt-on forged steel gusset that increases the overall strength of the factory Toyota spindle. Installation takes 1-2 hours, requires no spindle ...

Complete replacement tie rod assembly kit for Dana 44 axles, consisting of a DOM steel tie rod with adjusting sleeve, left and right forged steel t...

Complete replacement tie rod assembly kit for Dana 44 axles, consisting of a polished aluminum tie rod that serves as the adjusting sleeve, left an...

Complete replacement tie rod assembly kit for Dana 44 axles, consisting of a black aluminum tie rod that serves as the adjusting sleeve, left and r...

A customizable dual-tire inflation system that inflates or deflates two tires simultaneously with automatic pressure equalization. It includes a 90...

A fluid-filled tire pressure gauge built for off-road use, absorbing shock and vibration with a hard-coated 6061-T6 aluminum housing and stainless ...

A replacement service kit containing two detent pins for the AutoLynx product line, used for maintenance or repair.Fitment: Universal — no vehicle-...

A service kit containing replacement bushings and pins for maintenance of the AutoLynx product line. Apex notes it does not ship to PO boxes, freig...

A replacement service kit for the catch assembly on AutoLynx products, used for maintenance or repair of that component.Fitment: Universal — no veh...

A service kit replacement component for the AutoLynx system, providing replacement knob hardware for maintenance or repair.Fitment: Universal — no ...

A bundle pairing the Precision Pressure Gauge (available in 40 or 90 PSI, with a push-on chuck) with an aluminum snap mount featuring a gauge colla...

A set of replacement O-rings sold as a service kit for the Apex Steering Boost Kit system, sold individually.Fitment: Universal — no vehicle-specif...

A replacement aluminum cover nut for 3/8-inch APEX hose fittings, sold individually. It is a small hardware component used for maintaining or repai...

An impact-resistant composite-bodied 90 PSI tire inflator with a glow-in-the-dark gauge and fluid-filled construction for shock resistance. It incl...

A gauge mounting bracket made from high-strength, impact-resistant composite material, designed to securely hold the Apex Tire Inflator/gauge with ...

A hose adapter fitting that connects 3/8" APEX hose to a 1/4 NPT male thread. It includes an aluminum cover nut and is built for high-temperature a...

A kit of adjustable-rate sway bar end links for the front and rear of the Ram 2500, combining part X02-09-017 (front) and X02-09-016 (rear). Air pr...

A dual-option precision pressure gauge with a high-flow push-on chuck included. The 40 PSI model has a large, legible gauge face for fine-tuning of...

A precision tire inflator and gauge system offering +/- 0.5 PSI accuracy and 0.05 PSI repeatability. The 40 PSI variant targets lower off-road pres...

A replacement cover nut for APEX hose fittings, sold in pairs. It serves as a spare/replacement component for APEX brand hose fitting assemblies ra...

Adjustable-rate sway bar end links for the front of 2019-current Ford Ranger and Ranger Raptor models. Suspension stiffness is fine-tuned via air p...

Adjustable-rate sway bar end links for the front of Ram 2500 (2014-current) and Ram 3500 (2013-current) trucks. Suspension stiffness is adjusted vi...

An adapter that converts a traditional screw-on air chuck to a push-on style chuck. It opens the Schrader valve fully (100%) for faster inflation c...

A high-flow pneumatic chuck with a 1-foot hose whip terminated in an Apex male swivel connector, designed to connect directly to the Apex Precision...

A quick coupler designed for the Apex High Flow Push-On Chuck, compatible with the APEX Precision Tire Inflator, APEX On/Off Valve, and APEX Female...

A quick coupler designed for the Apex High Flow Push-On Chuck that connects to Apex Nylon Braided Hose accessories, such as the quadAIR multi-tire ...

A compact quick coupler designed for the Apex High Flow Push-On Chuck, connecting female 1/4 NPT air accessories. It has a hard anodized coating an...

A rebuild kit containing the parts necessary to rebuild an Apex High Flow Push On or Screw On Chuck.Fitment: Universal — no vehicle-specific fitmen...

A hydraulic hose fitting used as a replacement or spare part, with a JIC 37-degree -4 female swivel connection on one end and a 1/4 inch ID hose cr...

A two-piece kit of adhesive-lined heat shrink tubing, 1/2 inch inner diameter by 1.0 inch long, used to provide a clean, sealed finish when convert...