Products

A bundle pairing the Precision Pressure Gauge (available in 40 or 90 PSI, with a push-on chuck) with an aluminum snap mount featuring a gauge colla...

A precision gauge deserves a precision mount. The PPG Snap Mount provides a solid mounting solution for your Precision Pressure Gauge. The PPG Snap...

An impact-resistant composite-bodied 90 PSI tire inflator with a glow-in-the-dark gauge and fluid-filled construction for shock resistance. It incl...

A customizable dual-tire inflation system that inflates or deflates two tires simultaneously with automatic pressure equalization. It includes a 90...

A precision tire inflator and gauge system offering +/- 0.5 PSI accuracy and 0.05 PSI repeatability. The 40 PSI variant targets lower off-road pres...

A rebuild kit containing the parts necessary to rebuild an Apex High Flow Push On or Screw On Chuck.Fitment: Universal — no vehicle-specific fitmen...

This is a Y-shaped fitting that connects directly to the Panel Mount Fitting, Precision Tire Inflator, and On/Off Valve. It can also connect to qui...

Air up FAST with the PATENT PENDING Apex Rapid Inflate Valve! You can expect sub 10 second air-up times when paired with a compressor at 120 PSI a...

Air up FAST with the PATENT PENDING Apex Rapid Inflate Valve! You can expect sub 10 second air-up times when paired with a compressor at 120 PSI an...

This innovative, patent-pending fast deflation tire valve allows you to quickly deflate your tires in a matter of seconds. Here’s how it works: Un...

This innovative, patent-pending fast deflation tire valve allows you to quickly deflate your tires in a matter of seconds. Here’s how it works: Un...

While it is not APEX RPV fast, it is still super quick and install is a snap! Meet the Rapid Connect Valve! Finally, a FAST screw on deflator that ...

Replacement cap for RCV (Rapid Connect Valve) Part NumbersMPN X02-03-006

This is a replacement installation tool for the Rapid Connect Valve (RCV). It is normally included with purchases of 4 or 5 RCVs; this listing is a...

A replacement cover nut for APEX hose fittings, sold in pairs. It serves as a spare/replacement component for APEX brand hose fitting assemblies ra...

A replacement Schrader valve cap for the airLYNX valve assembly, sold as a spare/replacement part.Fitment: For use with airLYNX equipmentMPN: X02-0...

This kit contains two replacement nuts for use with Apex RPV and RIV products.Fitment: Compatible with RPV and RIV productsMPN: X02-03-012 Part Num...

This air chuck is specific to the Rapid Inflation Valves (RIV). NOT COMPATIBLE WITH STANDARD SCHRADER VALVES Part NumbersMPN X02-02-008

A mounting bracket kit that connects Rock Jock CurrectLync tie rods and drag links to the Apex Through Shaft Ram steering system.Fitment: Verified ...

RPV Valve Cap & Lanyard Part NumbersMPN X02-03-002

 for standard and XL valves Part NumbersMPN X02-03-001

This is a silicone-based lubricant used for servicing the o-ring seals on RPV (Rapid Precision Valve) products and other o-ring applications.Fitmen...

Standard TPMS Mount for Rapid Precision Valve (RPV) Fits TPMS sensors for American made vehicles. Part NumbersMPN X02-03-009

A mounting bracket kit that connects a Steer Smarts Yeti XD tie rod to the Apex Through Shaft Ram steering system. Currently listed as sold out on ...

BE SURE TO SELECT THE CORRECT CONFIGURATION BEFORE CHECKING OUT SKU X02-04-002 - With Cooler SKU X02-04-001 - Without Cooler URN UP THE PRESSURE ON...

A mounting and purge system used to port the factory steering gear on Jeep JL/JT vehicles. It includes table-mounted brackets that hold the steerin...

This kit relocates the factory sway bar 1 inch forward from its OEM position, providing additional clearance for lifted or aftermarket suspension s...

A kit of zip ties and hardware used to secure the Remote Fill air lines to the vehicle's sway bar, completing installation of the Remote Fill for a...

A fluid-filled tire pressure gauge built for off-road use, absorbing shock and vibration with a hard-coated 6061-T6 aluminum housing and stainless ...

TPMS Adapter Kit [Works with OEM Toyota/Japanese build sensors, set of 4 or 5] These work with the vehicle's OEM TPMS. Aftermarket sensors (e.g., c...

A replacement rod end bolt used for the axle-side connection of the Apex TSR (Through Shaft Ram) steering system. This hardware piece is required w...

An axle-side mounting bracket for the TSR (Through Shaft Ram) high-mount steering system. It installs over the top of the tie rod and works with fa...

A bracket that can be welded onto most single-shear tie rod clamps with a flat mounting surface to provide double-shear mounting capability for the...

A hydraulic hose fitting used as a replacement or spare part, with a JIC 37-degree -4 female swivel connection on one end and a 1/4 inch ID hose cr...

A hydraulic hose kit for the Through Shaft Ram (TSR) steering system, usable either as a component for the elevated (high-mount) TSR mounting optio...

A bracket that secures Apex hydraulic lines to the top of FAD (front axle disconnect) housings. It is a component of the TSR High Mount Kit for off...

A set of 3 brackets used to mount the Apex hydraulic hose to the top of the differential cover, securing hydraulic hose routing on the diff.Fitment...

A bracket used to fasten Apex hydraulic hoses to the inside of the vehicle frame or any flat surface.Fitment: Universal — no vehicle-specific fitme...

A mounting bracket used to secure Apex hydraulic hoses to the top of the driver's side lower control arm (LCA) bracket. Note: page title/descriptio...

A bracket that mounts Apex hydraulic hoses to the factory (OE) brake line and brake line bracket assembly.Fitment: Universal — no vehicle-specific ...

A protective skid plate designed to shield the Apex Through Shaft Ram steering component during off-road use.Fitment: Compatible with X02-10-001 &a...

A through-shaft hydraulic steering ram that adds hydraulic assist to the factory electronic power steering system, engineered to work with the stoc...

A through-shaft steering assist ram for Jeep JL and JT vehicles that works alongside the factory electronic power steering system to provide equal ...

This bracket can be used to mount the PPG Snap Mount to the side of your hose reel or any other flat surface.  Part NumbersMPN X02-08-008

A gauge mounting bracket made from high-strength, impact-resistant composite material, designed to securely hold the Apex Tire Inflator/gauge with ...

A pneumatic chuck used to inflate airLYNX suspension components. It seals between the valve stem and the chuck before the core is engaged, allowing...

This is an ARB Summit combination bumper kit. Part NumbersMPN 3415020KB · UPC 09332018142825

This ARB air compressor is a brushless twin unit listed in the recovery air compressor category. Part NumbersMPN ARBCKBLTA12