Products

Finally! A high quality sway-bar disconnect for the Toyota 4Runner, Tacoma, FJ and GX. The APEX kwikLYNX allow you to easily disconnect and reconne...

A 14mm caliper bolt kit intended for use with the Bolt-On Spindle Gusset kit. The bolts are not included in the gusset kit itself and must be purch...

This connector links 3/8-inch braided hose to Apex female swivel fittings, such as the panel mount and on/off valve.Fitment: Use this fitting to co...

A four-tire inflation and deflation system built around 42 feet of 3/8" nylon braided airline that is measured and cut to fit the specific vehicle....

A nylon braided air hose made of nitrile rubber with a durable nylon braid, with a 3/8 inch outer diameter and 1/4 inch inner diameter, sold by the...

A replacement spring stop component used to convert the Apex High Flow Push On Chuck between open-flow and closed-flow modes. The High Flow Push On...

A bolt-on bracket used to mount the Apex Panel Mount fitting to any flat surface. It functions as a mounting solution for panel-mount air fittings ...

This fitting flush-mounts Apex 3/8 braided air line to a flat panel, creating a quick-access port for connecting Apex multi-tire air systems.Fitmen...

A hydraulic banjo bolt adapter connecting 1/8 NPT threads to a -4 JIC 7/16-20, 37-degree flare fitting, used to attach hydraulic lines to factory s...

This high performance Power Steering Cooler for the Jeep® platform addresses the challenge of intermittent power steering shut off due to excessive...

A dual-option precision pressure gauge with a high-flow push-on chuck included. The 40 PSI model has a large, legible gauge face for fine-tuning of...

A bundle pairing the Precision Pressure Gauge (available in 40 or 90 PSI, with a push-on chuck) with an aluminum snap mount featuring a gauge colla...

A precision gauge deserves a precision mount. The PPG Snap Mount provides a solid mounting solution for your Precision Pressure Gauge. The PPG Snap...

An impact-resistant composite-bodied 90 PSI tire inflator with a glow-in-the-dark gauge and fluid-filled construction for shock resistance. It incl...

A customizable dual-tire inflation system that inflates or deflates two tires simultaneously with automatic pressure equalization. It includes a 90...

A precision tire inflator and gauge system offering +/- 0.5 PSI accuracy and 0.05 PSI repeatability. The 40 PSI variant targets lower off-road pres...

A rebuild kit containing the parts necessary to rebuild an Apex High Flow Push On or Screw On Chuck.Fitment: Universal — no vehicle-specific fitmen...

This is a Y-shaped fitting that connects directly to the Panel Mount Fitting, Precision Tire Inflator, and On/Off Valve. It can also connect to qui...

Air up FAST with the PATENT PENDING Apex Rapid Inflate Valve! You can expect sub 10 second air-up times when paired with a compressor at 120 PSI a...

Air up FAST with the PATENT PENDING Apex Rapid Inflate Valve! You can expect sub 10 second air-up times when paired with a compressor at 120 PSI an...

This innovative, patent-pending fast deflation tire valve allows you to quickly deflate your tires in a matter of seconds. Here’s how it works: Un...

This innovative, patent-pending fast deflation tire valve allows you to quickly deflate your tires in a matter of seconds. Here’s how it works: Un...

While it is not APEX RPV fast, it is still super quick and install is a snap! Meet the Rapid Connect Valve! Finally, a FAST screw on deflator that ...

Replacement cap for RCV (Rapid Connect Valve) Part NumbersMPN X02-03-006

This is a replacement installation tool for the Rapid Connect Valve (RCV). It is normally included with purchases of 4 or 5 RCVs; this listing is a...

A replacement cover nut for APEX hose fittings, sold in pairs. It serves as a spare/replacement component for APEX brand hose fitting assemblies ra...

A replacement Schrader valve cap for the airLYNX valve assembly, sold as a spare/replacement part.Fitment: For use with airLYNX equipmentMPN: X02-0...

This kit contains two replacement nuts for use with Apex RPV and RIV products.Fitment: Compatible with RPV and RIV productsMPN: X02-03-012 Part Num...

This air chuck is specific to the Rapid Inflation Valves (RIV). NOT COMPATIBLE WITH STANDARD SCHRADER VALVES Part NumbersMPN X02-02-008

A mounting bracket kit that connects Rock Jock CurrectLync tie rods and drag links to the Apex Through Shaft Ram steering system.Fitment: Verified ...

RPV Valve Cap & Lanyard Part NumbersMPN X02-03-002

 for standard and XL valves Part NumbersMPN X02-03-001

This is a silicone-based lubricant used for servicing the o-ring seals on RPV (Rapid Precision Valve) products and other o-ring applications.Fitmen...

Standard TPMS Mount for Rapid Precision Valve (RPV) Fits TPMS sensors for American made vehicles. Part NumbersMPN X02-03-009

A mounting bracket kit that connects a Steer Smarts Yeti XD tie rod to the Apex Through Shaft Ram steering system. Currently listed as sold out on ...

BE SURE TO SELECT THE CORRECT CONFIGURATION BEFORE CHECKING OUT SKU X02-04-002 - With Cooler SKU X02-04-001 - Without Cooler URN UP THE PRESSURE ON...

A mounting and purge system used to port the factory steering gear on Jeep JL/JT vehicles. It includes table-mounted brackets that hold the steerin...

This kit relocates the factory sway bar 1 inch forward from its OEM position, providing additional clearance for lifted or aftermarket suspension s...

A kit of zip ties and hardware used to secure the Remote Fill air lines to the vehicle's sway bar, completing installation of the Remote Fill for a...

A fluid-filled tire pressure gauge built for off-road use, absorbing shock and vibration with a hard-coated 6061-T6 aluminum housing and stainless ...

TPMS Adapter Kit [Works with OEM Toyota/Japanese build sensors, set of 4 or 5] These work with the vehicle's OEM TPMS. Aftermarket sensors (e.g., c...

A replacement rod end bolt used for the axle-side connection of the Apex TSR (Through Shaft Ram) steering system. This hardware piece is required w...

An axle-side mounting bracket for the TSR (Through Shaft Ram) high-mount steering system. It installs over the top of the tie rod and works with fa...

A bracket that can be welded onto most single-shear tie rod clamps with a flat mounting surface to provide double-shear mounting capability for the...

A hydraulic hose fitting used as a replacement or spare part, with a JIC 37-degree -4 female swivel connection on one end and a 1/4 inch ID hose cr...

A hydraulic hose kit for the Through Shaft Ram (TSR) steering system, usable either as a component for the elevated (high-mount) TSR mounting optio...

A bracket that secures Apex hydraulic lines to the top of FAD (front axle disconnect) housings. It is a component of the TSR High Mount Kit for off...

A set of 3 brackets used to mount the Apex hydraulic hose to the top of the differential cover, securing hydraulic hose routing on the diff.Fitment...