MetalCloak HD Steering System | Fox Edition | Jeep Wrangler JK (2007-2018) | P/N 7134-F

The HD Steering System Fox Edition combines a chromoly dog-leg tie rod, a high-clearance drag link and a Fox steering stabilizer tuned for the 2007-2018 Jeep Wrangler JK and Wrangler Unlimited. The tie rod and drag link both use 1-ton forged rod ends and can be adjusted while installed.

Features

• Tubular 1.625in OD, .375in wall chromoly tie rod
• Drag link with 1-ton forged, heat-treated rod ends and a gold zinc chromate finish
• Dog-leg rod end design controls tie rod flop
• OE taper pin and lock nut for exact fitment
• Rod ends sealed with rubber grease boots
• Billet tie rod mount
• Heavy duty 3/16in adjustable steering stabilizer mount bracket installs at the factory location
• Fox stabilizer with increased compression and extension damping, tuned for the JK

Specifications

• Tie rod: 1.625in OD x .375in wall chromoly
• Rod ends: 1-ton forged and heat treated, 1in dog-leg
• Drag link tubing: 1.375in OD, high-clearance bends for aftermarket axles and differential covers
• Finish: gold zinc chromate
• Billet mount: two-piece aluminum, anodized black, laser-engraved M

Notes

• Works with left-hand drive applications only.
• Does not work with stock wheel backspacing.
• A raised steering stabilizer requires at least 2in of bump stop to clear the frame.
• Anti-seize on all bolts is recommended when the billet tie rod mount is used.
• The billet steering stabilizer mount fits any 1.625in OD tie rod on the JK, JL and Gladiator JT.

Fitment

• Jeep Wrangler JK (2007-2018)

Part Numbers

• MPN 7134-F