This aluminum skid plate covers the oil pan and transmission of the Jeep Wrangler JK. It is made from 1/4in thick plate aluminum and bolts on, with a laser cut door for oil changes and tapered washers over the bolt heads. On 2007-2011 3.8L models it also covers the catalytic converters.
Features
- 1/4in thick plate aluminum
- 100% bolt-on design
- Laser cut oil change access door
- Tapered washers protect the bolt heads
- Works with 3.8L and 3.6L engines
- Catalytic converter protection on 2007-2011 3.8L models
- Mounts away from driveline components
- Powder coat and all hardware included
Specifications
- Material: 1/4in thick plate aluminum
- Skid weight: 33 lb
- Engines: 3.8L and 3.6L
- Suspension: short arm/factory
- Finish: powder coat included
- Shipping weight: 35 lb
- Shipping carton: 42 x 30 x 4 in
Notes
- For control arms in the factory mounting location. If the control arm mounts have been relocated on the frame, use the long arm version.
- Aftermarket crossmembers may need customer-supplied bolts: the hole pattern is correct, but some makers use a different thread.
- The newer JK factory skid in the same location must be removed. The factory crossmember stays in place.
- Not compatible with the Ultimate Dana 60 front housing (cooling fins). No issue reported with Currie or Dynatrac housings.
- The 3.6L exhaust loop is not covered, so its heat is not trapped.
- For an AEV HEMI swap, use the RH-6003-HEMI mounting bracket kit.
Fitment
- Jeep Wrangler JK (2007-2018)
Part Numbers