Engine/Underhood

This aFe Super Stock Induction System uses a Pro Dry S filter with three layers of oil free synthetic media that needs no oil during maintenance. T...

This is an aFe Quantum cold air intake system with a Pro DRY S filter.Fitment: 18-20 Jeep Wrangler JL L4 2.0L (t) Part NumbersMPN 53-10019D · UPC 8...

This Apollo GT Series Cat Back exhaust uses 3in mandrel bent 409 stainless steel tubing and a single high flow stainless muffler with a deep tone. ...

This aFe Apollo GT Series cat back exhaust system uses 3in 409 stainless steel and comes with a black tip. It is listed for the 2021 Ford Bronco wi...

This direct fit cat back system exits straight on the driver side without a tip. It sits closer to the undercarriage than the stock system for adde...

This Vulcan axle back system uses mandrel bent 304 stainless steel tubing and a high flow 304 stainless muffler. It ends in dual 4in black tips and...

This MagnaFlow Street Series axle back exhaust has 2.5in mandrel bent main piping leading to a large straight through muffler. It exits through dua...

This aFe Vulcan axle back exhaust uses mandrel bent 304 stainless steel tubing that steps from 3in to 2-1/2in, with a high flow stainless muffler. ...

This Vulcan cat back system is built from 304 stainless steel with mandrel bent 3in to 2.5in tubing and 304 stainless mufflers. It ends in dual 4in...

This axle back system uses 3in to 2-1/2in mandrel bent 304 stainless tubing and a 304 stainless muffler with a mild sound. It finishes with dual 4i...

This MagnaFlow Street Series axle back system uses mandrel bent 2.5in main piping that leads into a large straight through muffler. The exhaust exi...

This Vulcan Series Cat Back exhaust is built from mandrel bent 304 stainless steel tubing that steps from 3in down to 2-1/2in. It uses 304 stainles...

This Overland Series cat back exhaust is a direct fit system for the turbo 2.3L four cylinder Bronco. It mounts closer to the undercarriage than th...

This aFe Momentum GT intake uses a 360 degree radial flow Pro DRY S filter with three layers of oil free synthetic media. The sealed one piece hous...

This cold air intake uses a 360-degree radial flow filter with three layers of oil free Pro DRY S media. The one piece sealed housing is made of he...

This cold air intake uses a 360 degree radial flow filter with oiled Pro GUARD 7 media made of cotton and synthetic layers. The one piece sealed ho...

This is the aFe POWER Momentum HD cold air intake system with a pre oiled Pro 5R filter. The 360 degree radial flow filter uses five layers of prog...

This cold air intake uses a 360 degree radial flow Pro GUARD7 filter with five layers of cotton media and two layers of synthetic media. The one pi...

This cold air intake uses a 360 degree radial flow air filter with oiled Pro 5R media, which has five layers of cotton gauze.Fitment: 2021 Ford Bro...

This replacement thermostat has a 195 degree opening temperature and a steel construction. It replaces OE 83501426.Fitment: 72-06 Jeep models. Fitm...

This radiator fan shroud from Omix is a replacement for TJ models with the 4.0L engine. It is intended for vehicles where the original shroud has c...

This is a worm style radiator hose clamp that adjusts from 1-5/16 to 2-1/4in. It is stainless steel, sold individually and listed for various Willy...

This replacement thermostat has a 160 degree opening temperature and a steel construction. It replaces OE 812050.Fitment: 41-71 Willys and Jeep mod...

This Omix thermostat has a 180 degree opening temperature and is a steel replacement for the factory part. It replaces OE 83501426 and is intended ...

This is a replacement switch for the rear wiper on hardtop models. It replaces OE 56007249 and is backed by a limited 5 year warranty.Fitment: 97-9...

This Omix pinion oil seal is a replacement for Dana 30 and Dana 44 axles. It is an OE style, direct fit part with a limited 5 year warranty.Fitment...

This Omix oil pan gasket is a one piece molded rubber replacement. It is listed for 4.0 and 4.2 liter engines and replaces OE 53007568.Fitment: 72-...

This kit replaces worn valvetrain rocker components on 4.0L and 4.2L engines. It includes 6 rocker bridges, 12 rocker pivots and 12 rocker arms. Om...

This Omix inner axle oil seal is a replacement part that is listed for both the left and right side. It is for 72-06 Jeep models.Fitment: 72-06 Jee...

This differential cover gasket is for Dana 35 rear differentials and is sold individually. It replaces OE number 3229429 and carries a limited 5 ye...

This open back style pinion oil seal is made of steel with a rubber inner and can be used at the front or rear differential. It is intended for Dan...

This inner pinion oil slinger is for vehicles with a Dana 30 front differential and replaces OE 4031974.Fitment: 92-06 Jeep TJ with a Dana 30 front...

This rubber valve cover gasket from Omix is a replacement for 4.0L engines in the Jeep models listed. Omix lists it for 97-06 Wrangler TJ, 96-01 Ch...

This is a replacement idle air control valve for models with the 2.4 liter engine, covering the 02-04 Wrangler TJ, 04 Wrangler Unlimited LJ and 02-...

This Omix upper engine gasket set is for Jeep models with the 4.0 liter engine. It combines reinforced fiber, cork, MLS and viton materials and inc...

This Omix power steering pump pulley is a replacement part for 97-06 Jeep models. It is made of cast metal with a six ribbed design and replaces OE...

This Omix cylinder head gasket is a composite replacement for 4.0 liter engines. Use one per engine. It replaces OE 53020754.Fitment: 4.0L 96-99 Ch...

This rubber main crankshaft seal is for engines of 3.8, 4.0 and 4.2 liters. It replaces OE 3224704 and is backed by a limited 5 year warranty.Fitme...

This Omix heater blower resistor replaces the original unit that sets blower speeds. It mounts to the blower motor housing and regulates the speed ...

This replacement serpentine drive belt has 6 grooves and a 75in effective length. It is built from rubber that resists oil, heat and abrasion, and ...

This heater core has aluminum core construction and measures 7.125 x 6.75 x 1.625in. It has a 1/2in inlet and replaces OE 5073180AA. It is an OE st...

This Omix oil pan is a steel replacement for 4.0 liter engines and replaces OE 53010340. The matching oil pan gasket is Omix 17439.06.Fitment: 4.0L...

This is a metal replacement rocker arm pivot for engine rebuilds and repairs. It is direct fit and backed by a limited 5 year warranty.Fitment: 72-...

This throttle body spacer is machined from T-6061 billet aluminum. Its serrated helix entry creates turbulence ahead of the manifold, and aFe state...

This Off Road Pro Series cat back system from MagnaFlow is made of stainless steel and runs close to the undercarriage for ground clearance. It is ...

This OEM grade universal catalytic converter has 2.25in center/center inlet and outlet connections and a round body that is 9in long and 5.125in wi...

This universal catalytic converter has a 2.25in inlet and outlet in a center/center layout. The round body is 11in long and 5.125in wide, with a 15...

This HM Grade universal catalytic converter has 2.25in connections and 16 gauge 409 stainless steel tubing with 308 stainless MIG welds. Its compac...