Barnes 4WD

The Barnes 4WD Pro Series Ford Front Dana 60 78-79 Truss is a full width low profile truss made from a combination of 1/4" and 3/16" steel to keep ...

Upgrade your flimsy, fatigued, and possibly bent JK crossmember with our new heavy duty JK crossmember. The factory crossmember on the JK is thinl...

 Having problems finding a place to mount shocks on your already cramped leaf spring suspension project? We have the answer! These tabs may be si...

This is our rear Jeep JK Rear Track Bar Bracket, it is designed for lifted and stock Jeep JK s, the stock rear Jeep JK track bar mount is inadequat...

If you are looking for a simply bright way to light up your license plate, you have found it from Barnes 4wd with our L.E.D. license plate light. ...

Barnes 4wd is proud to introduce our JK rear lower control arm mount skids, these are the paramount in underbody protection for your Jeep Wrangler ...

Barnes 4wd is proud to introduce our JK evap skid for the 2007-2015 Jeep Wrangler JK.  The factory design on the JK puts the evaporation canister i...

Some times a good set of leaf springs can be just a little too flexible and cause leaf spring inversion, this is when the shackle tries to flip ups...

High Misalignment spacer reduces a 1/2 inch bore to a 10 millimeter bolt hole. Mounting width when installed is 1 3/8 inches with 54° of total misa...

If you have a diesel and are experiencing wheel hop, building a pulling truck, or just looking for the strongest traction bars that you can get, Ba...

If you have a diesel and are experiencing wheel hop, building a pulling truck, or just looking for the strongest traction bars that you can get, Ba...

This brake line retainer clip will work with most brake lines that are made for a bracket with a 5/8" hole and will work with our Bolt On Brake Tab...

If you need a little taller shock mounting tab for your project you have come to the right place, these are the tallest shock mounts that we offer ...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

This tube insert is designed to be used with a 7/8" heim joint in tubing with a 1 1/2" I.D.  This tube insert differs from our standard insert beca...

This tube insert is designed to be used with a 3/4" heim joint in tubing with a 1" I.D.  This tube insert differs from our standard insert because ...

Barnes 4wd u-bolts are anything but standard! This u bolt measures 5/8" X 3 1/4" X 14" and are a great fit for Ford 8.8 and Dana 60 axles. The big...

This is our Short Receiver Tube, this part is a must have for the people building a bumper or just looking to add a receiver to their existing chas...

These weld on tie down loops are a great addition to finish your project off right, they make a perfect location to attach straps or bungee cords t...

Our Jeep TJ rear coil spring brackets are designed to go in place of your factory brackets and are a great option when swapping a Dana 60 or Ford 8...

Our Jeep TJ rear lower control brackets are designed to go in place of your factory brackets and are a great option when swapping a Dana 60 or F...

Mounting a steering column in a tube chassis or a full bodied rig with a cage after the addition of full hydraulic steering can be a challenge, oft...

Our curved shock tabs are designed to make mounting shocks to the tubing on your rig a pain free experience, the bottom radius on these tabs are cu...

Our axle shock tabs are manufactured from 3/16" steel and are made to fit a 3 3/8" axle tube (GM 14 Bolt), but will fit other tube diameters with s...

Our Dana 60 bronze upper kingpin bushings have been engineered to take the place of the factory plastic bushings that can fail under heavy use.  If...

Barnes 4wd is proud to offer the best crossover steering kit on the market, complete with high quality 1 ton tie rod ends.  This kit is a huge upgr...

This is the D.O.M. kit that we sell with all of our steering kits.You will recieve:2 Pieces of 1.5" x 1/4" Wall D.O.M. 54" Long ...

If you don't have room for a traditional tie rod on your front axle, then our offset one ton tie rod kit may be just what you have been searching f...

DOM can be used for Roll Cages, Link Suspension's, Steering Linkages and Cross Members. No matter what you need DOM for Barnes 4wd has it for your...

Your search for the highest quality Dana 44 high steer arms at the lowest price ends here, we offer the most complete kit available.  Our Dana 44 h...

This is a high quality single stud, nut, and cone washer for our Dana 44 high steer arms.  These studs are manufactured from 4140 chromoly for the ...

Barnes 4wd is proud to offer the best Dana 60 high steer cross-over steering kit on the market, complete with high quality 1 ton tie rod ends.  Thi...

This is our Dana 60 driver spring-less high steer arm, this arm will bolt to any knigpin 1 ton front axle.  Our arms are 1" thick steel and use a l...

Barnes 4wd is proud to offer the best Dana 44 high steer cross-over steering kit on the market, complete with high quality 1 ton tie rod ends.  Thi...

This kit comes with everything that you need to convert your Dana 44 to crossover steering.  Kit Contents: 1 Passenger Dana 44 High Steer Arm 1 Sta...

Sometimes its just not possible to fit crossover steering on your rig this is where our Y-link steering kit can save the day.  If you are having to...

Sometimes its just not possible to fit crossover steering on your rig this is where our Y-link steering kit can save the day.  If you are having to...

Wide high misalignment spacer reduces a 3/4 inch  bore to a 9/16 inch bolt hole, mounting width when installed is 2 5/8 inches with 60° of total mi...

Wide high misalignment spacer reduces a 3/4 inch bore to a 5/8 inch bolt hole, mounting width when installed is 2 5/8 inches with 52° of total misa...

The rear shock mounting brackets on the Jeep JKs are the lowest point on the rear axle, they are made from flimsy sheet metal and are prone to dama...

This is a complete, high quality 3 link suspension kit with all the parts you need to install a three link suspension on your rig at home.  All the...

This tube insert is designed to be used with a 1 1/4" heim joint or our Enduro joint in tubing with a 1 1/2" I.D.  This tube insert differs from ou...

Barnes 4wd square tube inserts will help you keep the overall cost down on your link project. Available in left and right hand threadings, these 1 ...

Misalignment spacer for 1 inch bore. Mounting width when installed is 2 5/8 inch with 40° of total misalignment (20° in either direction). Sold Ind...

Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength, our tube inserts allow for the ...

Heavy Duty 3/4 - 16 Tube Inserts Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength...

Heavy Duty 1/2 - 20 Tube Inserts Barnes offers the most affordable high-quality weld in bungs on the market. Built race style for maximum strength...

This tube insert is designed to be used with a 3/4" heim joint in tubing with a 1" I.D.  This tube insert differs from our standard insert because ...