APEX Designs USA

This kit contains two replacement nuts for use with Apex RPV and RIV products.Fitment: Compatible with RPV and RIV productsMPN: X02-03-012

This is a silicone-based lubricant used for servicing the o-ring seals on RPV (Rapid Precision Valve) products and other o-ring applications.Fitmen...

This kit relocates the factory sway bar 1 inch forward from its OEM position, providing additional clearance for lifted or aftermarket suspension s...

A step drill bit with a 1/4 inch drive used to create properly sized holes in sway bars for nutsert installation as part of the kwikLYNX kit.Fitmen...

A nylon braided air hose made of nitrile rubber with a durable nylon braid, with a 3/8 inch outer diameter and 1/4 inch inner diameter, sold by the...

A kit of hardened washers used as spacers for the AutoLYNX sway bar disconnect system. It includes four washers per side and is intended to correct...

Replacement lower link bolts for the AutoLYNX sway bar disconnect system, specified as M12 x 1.5, 70mm long, matching OE thread pitch. The kit is i...

3/8" swivel to 1/4" NPT (male). This fitting allows you to connect 1/4" NPT to our screw on quick coupler and provides a swivel to the fitting conn...

Precision Tire Inflator without gauge - (Precision Pressure Gauge can be adapted to the Precision Tire Inflator - If you already purchased the PPG ...

BE SURE TO SELECT THE CORRECT THREAD PITCH BEFORE CHECKING OUT SKU X02-09-001 - M14x1.5 FACTORY ball joint thread pitch SKU X02-09-007 - M14x2.0 De...

Finally! A high quality sway-bar disconnect for the Toyota 4Runner, Tacoma, FJ and GX. The APEX kwikLYNX allow you to easily disconnect and reconne...

Standard TPMS Mount for Rapid Precision Valve (RPV) Fits TPMS sensors for American made vehicles.

The Apex Precision Tire Inflator provides precise tire fill and pressure read outs every time with accuracy you can count on. 0-40PSI Inflator - De...

THIS FITTING ALLOWS YOU CONNECT OUR 3/8" BRAIDED AIR HOSE TO 1/4" PUSH TO CONNECT FITTINGS

The Apex Banjo Fitting is used to connect the Apex Braided Air Hose to the Compact Reel System. SPECS: 1/4 NPT to APEX 3/8 Braided Air Hose

Hose end fitting for CRS braided air line This handy fitting was designed to easily thread together and clamp on the end of our braided air line al...

CRS MOUNTING BRACKET FOR JEEP GLADIATOR This bracket allows you to mount the 20' or 35' CRS under the drivers side rear seat.

JKU ROLL CAGE BRACKET - Mounting solution for CRS (Compact Reel System). This mount bolts to the factory soft top location and is not compatible if...

CRS UNIVERSAL MOUNTING BRACKET Can be used in a variety of applications.

JEEP JLU MOUNTING BRACKET.  FOR USE WITH HARDTOP ONLY - WILL NOT WORK WITH FACTORY SOFT TOP. THIS BRACKET CAN ALSO BE USED UNIVERSALLY AS A VERTICA...

Features: High impact DuPont glass filled nylon 66 reel guide Highly resistant to UV and chemicals 6061-t6 aluminum with wear resistant and fad...

While it is not APEX RPV fast, it is still super quick and install is a snap! Meet the Rapid Connect Valve! Finally, a FAST screw on deflator that ...

Replacement cap for RCV (Rapid Connect Valve)

The Flip to Deflate Cap offers an affordable way to quickly deflate your tires for off-road use. This handy valve stem cap features a deflator buil...

This bracket can be used to mount the PPG Snap Mount to the side of your hose reel or any other flat surface. 

A precision gauge deserves a precision mount. The PPG Snap Mount provides a solid mounting solution for your Precision Pressure Gauge. The PPG Snap...

The Apex Precision Pressure Gauge provides precise pressure read outs every time with accuracy you can count on. 0-90PSI gauge - This is the gauge ...

The Apex Precision Pressure Gauge provides precise pressure read outs every time with accuracy you can count on. 0-40PSI gauge - Designed with accu...

Now you have an alternative to a trail rate sway bar! The airLYNX for Jeep JL/JT/JK are adjustable rate sway bar end links that give you the abilit...

The Apex Precision Tire Inflator provides precise tire fill and pressure read outs every time with accuracy you can count on. 0-40PSI Inflator - De...

BE SURE TO SELECT THE CORRECT STROKE LENGTH BEFORE CHECKING OUT SKU X02-05-002 - 8.0" Stroke SKU X02-05-001 - 10.5" Stroke Has it been too many yea...

This high performance Power Steering Cooler for the Jeep® platform addresses the challenge of intermittent power steering shut off due to excessive...

BE SURE TO SELECT THE CORRECT CONFIGURATION BEFORE CHECKING OUT SKU X02-04-002 - With Cooler SKU X02-04-001 - Without Cooler URN UP THE PRESSURE ON...

This air chuck is specific to the Rapid Inflation Valves (RIV). NOT COMPATIBLE WITH STANDARD SCHRADER VALVES

Air up FAST with the PATENT PENDING Apex Rapid Inflate Valve! You can expect sub 10 second air-up times when paired with a compressor at 120 PSI an...

Air up FAST with the PATENT PENDING Apex Rapid Inflate Valve! You can expect sub 10 second air-up times when paired with a compressor at 120 PSI a...