Products

A service kit containing replacement bushings and pins for maintenance of the AutoLynx product line. Apex notes it does not ship to PO boxes, freig...

A replacement service kit for the catch assembly on AutoLynx products, used for maintenance or repair of that component.Fitment: Universal — no veh...

A replacement service kit containing two detent pins for the AutoLynx product line, used for maintenance or repair.Fitment: Universal — no vehicle-...

A service kit replacement component for the AutoLynx system, providing replacement knob hardware for maintenance or repair.Fitment: Universal — no ...

Replacement lower link bolts for the AutoLYNX sway bar disconnect system, specified as M12 x 1.5, 70mm long, matching OE thread pitch. The kit is i...

BE SURE TO SELECT THE CORRECT STROKE LENGTH BEFORE CHECKING OUT SKU X02-05-002 - 8.0" Stroke SKU X02-05-001 - 10.5" Stroke Has it been too many yea...

A kit of hardened washers used as spacers for the AutoLYNX sway bar disconnect system. It includes four washers per side and is intended to correct...

The Apex Banjo Fitting is used to connect the Apex Braided Air Hose to the Compact Reel System. SPECS: 1/4 NPT to APEX 3/8 Braided Air Hose Part Nu...

A bolt-on forged steel gusset that increases the overall strength of the factory Toyota spindle. Installation takes 1-2 hours, requires no spindle ...

A set of replacement O-rings sold as a service kit for the Apex Steering Boost Kit system, sold individually.Fitment: Universal — no vehicle-specif...

THIS FITTING ALLOWS YOU CONNECT OUR 3/8" BRAIDED AIR HOSE TO 1/4" PUSH TO CONNECT FITTINGS Part NumbersMPN X02-06-007

A replacement spring stop component for the Apex High Flow Push On Chuck that converts the chuck from open-flow to closed-flow operation. The High ...

A compact quick coupler designed for the Apex High Flow Push-On Chuck, connecting female 1/4 NPT air accessories. It has a hard anodized coating an...

A quick coupler designed for the Apex High Flow Push-On Chuck, compatible with the APEX Precision Tire Inflator, APEX On/Off Valve, and APEX Female...

A quick coupler designed for the Apex High Flow Push-On Chuck that connects to Apex Nylon Braided Hose accessories, such as the quadAIR multi-tire ...

This kit provides the components needed to connect an air compressor to an Apex panel mount system. It includes a barbed-to-NPT fitting with an alu...

Features: High impact DuPont glass filled nylon 66 reel guide Highly resistant to UV and chemicals 6061-t6 aluminum with wear resistant and fad...

Hose end fitting for CRS braided air line This handy fitting was designed to easily thread together and clamp on the end of our braided air line al...

JKU ROLL CAGE BRACKET - Mounting solution for CRS (Compact Reel System). This mount bolts to the factory soft top location and is not compatible if...

JEEP JLU MOUNTING BRACKET.  FOR USE WITH HARDTOP ONLY - WILL NOT WORK WITH FACTORY SOFT TOP. THIS BRACKET CAN ALSO BE USED UNIVERSALLY AS A VERTICA...

CRS MOUNTING BRACKET FOR JEEP GLADIATOR This bracket allows you to mount the 20' or 35' CRS under the drivers side rear seat. Part NumbersMPN X02-0...

CRS UNIVERSAL MOUNTING BRACKET Can be used in a variety of applications. Part NumbersMPN X02-06-004

This is a swivel connector with a female 3/8-inch end that connects to a 3/8-inch hose barb, used in pneumatic air line applications.Fitment: Unive...

This is an adapter fitting that converts an Apex Quick Connect male swivel fitting to 1/4 NPT. It is used with the Precision Tire Inflator and Quic...

The Flip to Deflate Cap offers an affordable way to quickly deflate your tires for off-road use. This handy valve stem cap features a deflator buil...

A peel-and-stick protective film designed to shield Apex gauge lenses from scratches and damage. It includes a repositionable quick-read indicator ...

A two-piece kit of adhesive-lined heat shrink tubing, 1/2 inch inner diameter by 1.0 inch long, used to provide a clean, sealed finish when convert...

Air up faster with our High Flow Chuck! While most standard clip on or or push on chucks only open the Schrader valve about 50%, our High Flow Chuc...

A push-on air chuck with a 1/4 NPT male fitting that connects to Schrader-style valve stems and fully opens the valve (100% vs. standard 50%) for f...

A push-on air chuck with a 1/4 NPT female fitting that connects to Schrader-style valve stems and opens the valve to 100% capacity versus a standar...

An adapter that converts a traditional screw-on air chuck to a push-on style chuck. It opens the Schrader valve fully (100%) for faster inflation c...

A push-on air chuck that connects to Schrader-style valve stems and fully opens the valve (100% vs. the standard 50%) for faster air delivery. It s...

A high-flow pneumatic chuck with a 1-foot hose whip terminated in an Apex male swivel connector, designed to connect directly to the Apex Precision...

Complete replacement tie rod assembly kit for Dana 44 axles, consisting of a DOM steel tie rod with adjusting sleeve, left and right forged steel t...

Complete replacement tie rod assembly kit for Dana 44 axles, consisting of a black aluminum tie rod that serves as the adjusting sleeve, left and r...

Complete replacement tie rod assembly kit for Dana 44 axles, consisting of a polished aluminum tie rod that serves as the adjusting sleeve, left an...

A step drill bit with a 1/4 inch drive used to create properly sized holes in sway bars for nutsert installation as part of the kwikLYNX kit.Fitmen...

Finally! A high quality sway-bar disconnect for the Toyota 4Runner, Tacoma, FJ and GX. The APEX kwikLYNX allow you to easily disconnect and reconne...

A 14mm caliper bolt kit intended for use with the Bolt-On Spindle Gusset kit. The bolts are not included in the gusset kit itself and must be purch...

This connector links 3/8-inch braided hose to Apex female swivel fittings, such as the panel mount and on/off valve.Fitment: Use this fitting to co...

A four-tire inflation and deflation system built around 42 feet of 3/8" nylon braided airline that is measured and cut to fit the specific vehicle....

A nylon braided air hose made of nitrile rubber with a durable nylon braid, with a 3/8 inch outer diameter and 1/4 inch inner diameter, sold by the...

A replacement spring stop component used to convert the Apex High Flow Push On Chuck between open-flow and closed-flow modes. The High Flow Push On...

A bolt-on bracket used to mount the Apex Panel Mount fitting to any flat surface. It functions as a mounting solution for panel-mount air fittings ...

This fitting flush-mounts Apex 3/8 braided air line to a flat panel, creating a quick-access port for connecting Apex multi-tire air systems.Fitmen...

A hydraulic banjo bolt adapter connecting 1/8 NPT threads to a -4 JIC 7/16-20, 37-degree flare fitting, used to attach hydraulic lines to factory s...

This high performance Power Steering Cooler for the Jeep® platform addresses the challenge of intermittent power steering shut off due to excessive...

A dual-option precision pressure gauge with a high-flow push-on chuck included. The 40 PSI model has a large, legible gauge face for fine-tuning of...