{"title":"Rock Hard 4x4","description":"\u003cp\u003eRock Hard 4x4 builds bolt-in sport cages, harness bars, bumpers, rocker guards, tube sliders, skid plates and belly pans in the USA.\u003c\/p\u003e\u003cp\u003eShop Rock Hard 4x4 parts for the Jeep Wrangler JL, JK, TJ, LJ and YJ, Jeep CJ5, CJ7 and CJ8 Scrambler, Gladiator JT, Cherokee XJ, Comanche MJ and Grand Cherokee, and the Ford Bronco.\u003c\/p\u003e","products":[{"product_id":"rock-hard-4x4-steel-complete-bellypan-skid-plate-system-ford-bronco-2-door-2021-2026","title":"Rock Hard 4x4 Steel Complete Bellypan Skid Plate System | Ford Bronco 2-Door (2021-2026) | P\/N RH-60500","description":"\u003cp\u003eThe Steel Complete Bellypan Skid Plate System covers the Ford Bronco 2-Door from frame rail to frame rail and from the oil pan to the tail of the gas tank in 3\/16in steel plate. It includes a front lower bash plate, oil pan and transmission skid with oil change access door, transfer case skid, resonator skid and fuel tank skid, all bolt-on with tapered washers that protect the bolt heads. Choose the version that matches your truck: with or without the factory fuel skid, and with a steel or plastic front bumper.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/16in steel plate\u003c\/li\u003e\n\u003cli\u003eCoverage from frame rail to frame rail, oil pan to tail of the gas tank\u003c\/li\u003e\n\u003cli\u003eFront lower bash skid connects from the front bumper underside to the first crossmember\u003c\/li\u003e\n\u003cli\u003eOil pan \/ transmission skid with oil change access door\u003c\/li\u003e\n\u003cli\u003eTransfer case skid connects to the main transmission crossmember\u003c\/li\u003e\n\u003cli\u003eFuel tank skid uses existing frame mounts with 2 included brackets\u003c\/li\u003e\n\u003cli\u003eTapered bolt head protecting washers\u003c\/li\u003e\n\u003cli\u003e100% bolt-on design\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePlate: 3\/16in steel\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003cli\u003eComponents: front lower bash skid plate, oil pan \/ transmission skid plate, transfer case skid plate, resonator skid plate, fuel tank skid plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo need to remove or replace the factory crossmember.\u003c\/li\u003e\n\u003cli\u003eMounts away from driveline components, no added vibration or noise.\u003c\/li\u003e\n\u003cli\u003eOptional muffler skid plate: RH-60507 (3\/16in steel) or RH-60547 (1\/4in aluminum).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 2-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-60500 - Without \/ Steel\u003c\/li\u003e\n\u003cli\u003eMPN RH-60501 - Without \/ Plastic\u003c\/li\u003e\n\u003cli\u003eMPN RH-60504 - With \/ Plastic\u003c\/li\u003e\n\u003cli\u003eMPN RH-60505 - With \/ Steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Without \/ Steel","offer_id":68143654666556,"sku":"RH-60500","price":1999.95,"currency_code":"USD","in_stock":true},{"title":"Without \/ Plastic","offer_id":68143654699324,"sku":"RH-60501","price":1999.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Plastic","offer_id":68143654732092,"sku":"RH-60504","price":1999.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Steel","offer_id":68143654764860,"sku":"RH-60505","price":1999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60500-2.jpg?v=1794436068"},{"product_id":"rock-hard-4x4-bolt-in-ultimate-sport-cage-jeep-cj7-1979-1986","title":"Rock Hard 4x4 Bolt-In Ultimate Sport Cage | Jeep CJ7 (1979-1986) | P\/N RH-1003","description":"\u003cp\u003eThe Rock Hard 4x4 Bolt-In Ultimate Sport Cage for the Jeep CJ7 1979-1986 covers the cabin from the factory sport bar forward to the dash. It bolts in with the factory cage left in place, so there is no drilling and no welding. It fits soft tops and hard tops and ships unpainted with all hardware.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMain cage section from the factory sport bar forward to the dash\u003c\/li\u003e\n\u003cli\u003eIncludes the top T-section, windshield side bars with grab handles and the bar across the dash\u003c\/li\u003e\n\u003cli\u003eDash brackets mount with 3 bolts at the triangle plate and 3 bolts down the door post on each side\u003c\/li\u003e\n\u003cli\u003eThe factory sport cage stays in place\u003c\/li\u003e\n\u003cli\u003eNo drilling and no welding\u003c\/li\u003e\n\u003cli\u003eFits soft tops and hard tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: unpainted\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-in, all hardware included\u003c\/li\u003e\n\u003cli\u003eShipping weight: 81 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 58 x 37 x 5 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTest fit every part before powder coating or painting.\u003c\/li\u003e\n\u003cli\u003eTwo dash pad styles exist on the CJ7. The style that tapers narrower over the last 3in on each side needs no trimming; the style that keeps the same width across the dash needs minor trimming.\u003c\/li\u003e\n\u003cli\u003eSome 1979 CJs carry an early 1978 style rear cage. If the rear hoop bolts to the fender wells on the outside of the tub above the rear wheels, it is not a 1979 and later cage, and the RH-1007 cage section is required instead. A 1979 and later rear cage mounts to the floor behind the front seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep CJ7 (1979-1986)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1003\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143655420220,"sku":"RH-1003","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1003-2.jpg?v=1794436078"},{"product_id":"rock-hard-4x4-patriot-series-rear-bumper-jeep-cherokee-xj-1984-2001","title":"Rock Hard 4x4 Patriot Series Rear Bumper | Jeep Cherokee XJ (1984-2001) | P\/N RH-1013","description":"\u003cp\u003eThe Rock Hard 4x4 Patriot Series Rear Bumper for the Jeep Cherokee XJ 1984-2001 is a full width bumper with 1\/4in plate steel corners and a 3\/16 x 2 x 4in tubing center section. It comes with or without the swing-out tire carrier, in versions for standard fenders, Bushwacker Pocket flares and Bushwacker Flat flares. Every version has an integrated 2in receiver and bolts on with no welding.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFull width coverage for the corner panels and tailgate, including the area below the tail lights\u003c\/li\u003e\n\u003cli\u003eEnd plates shaped for departure angle and clearance\u003c\/li\u003e\n\u003cli\u003eOverhang under the tub doubles as a skid surface when backing over obstacles\u003c\/li\u003e\n\u003cli\u003eIntegrated 2in receiver hitch\u003c\/li\u003e\n\u003cli\u003eRecovery shackle tabs welded on the face, passed through the bumper and welded again on the back\u003c\/li\u003e\n\u003cli\u003eTire carrier versions: frame tie-ins that run along the sides of the fuel tank and replace the factory receiver\u003c\/li\u003e\n\u003cli\u003eTire carrier versions: dual-stage latch and pre-load design to stop vibration and wobble, with a dual bearing and race hub\u003c\/li\u003e\n\u003cli\u003eTire carrier versions: holds up to a 38in spare, adjustable up and down and in and out\u003c\/li\u003e\n\u003cli\u003eTire carrier versions: safety pin hold-open, welded CB antenna mount, integrated Hi-Lift jack mounts and a security tab for a cable lock\u003c\/li\u003e\n\u003cli\u003eTire carrier versions: zerk grease fitting on the hub\u003c\/li\u003e\n\u003cli\u003eWithout tire carrier versions: two 5\/8 x 2-1\/2in CNC D-ring shackle mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate steel corners, 3\/16 x 2 x 4in tubing center\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss (raw paintable finish available on request)\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-on, no welding\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping, Standard with tire carrier: 286 lb, 80 x 36 x 21 in on a pallet, truck freight, more than one box\u003c\/li\u003e\n\u003cli\u003eShipping, Standard without tire carrier: 191 lb, 80 x 36 x 21 in on a pallet, truck freight\u003c\/li\u003e\n\u003cli\u003eShipping, Pocket flares with tire carrier: 221 lb, 80 x 36 x 21 in on a pallet, truck freight, more than one box\u003c\/li\u003e\n\u003cli\u003eShipping, Pocket flares without tire carrier: 151 lb, 80 x 36 x 21 in on a pallet, truck freight\u003c\/li\u003e\n\u003cli\u003eShipping, Flat flares with tire carrier: 276 lb, 80 x 36 x 21 in on a pallet, truck freight\u003c\/li\u003e\n\u003cli\u003eShipping, Flat flares without tire carrier: 115 lb, 73 x 28 x 14 in carton, ground or truck freight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSome 1996 XJs have rear fenders without removable lower sections; those fenders must be trimmed.\u003c\/li\u003e\n\u003cli\u003eCompatible with RH-2003-LT driver side tank mount, RH-2004 Rock Rack cargo mount and RH-3009 fuel tank skid plate. RH-2003-RT passenger side tank mount is not compatible.\u003c\/li\u003e\n\u003cli\u003eBushwacker Pocket Flares versions fit Bushwacker Pocket and Notch Customs flares. Bushwacker Flat Flares versions fit Bushwacker Flat flares.\u003c\/li\u003e\n\u003cli\u003eGrease the hub fitting after water crossings and rain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Cherokee XJ (1984-2001)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-1013 - Standard \/ With Tire Carrier\u003c\/li\u003e\n\u003cli\u003eMPN RH-1013-A - Standard \/ Without Tire Carrier\u003c\/li\u003e\n\u003cli\u003eMPN RH-1013-B - Bushwacker Pocket Flares \/ With Tire Carrier\u003c\/li\u003e\n\u003cli\u003eMPN RH-1013-C - Bushwacker Pocket Flares \/ Without Tire Carrier\u003c\/li\u003e\n\u003cli\u003eMPN RH-1013-D - Bushwacker Flat Flares \/ With Tire Carrier\u003c\/li\u003e\n\u003cli\u003eMPN RH-1013-E - Bushwacker Flat Flares \/ Without Tire Carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Standard \/ With Tire Carrier","offer_id":68143656010044,"sku":"RH-1013","price":1499.95,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Without Tire Carrier","offer_id":68143656042812,"sku":"RH-1013-A","price":949.95,"currency_code":"USD","in_stock":true},{"title":"Bushwacker Pocket Flares \/ With Tire Carrier","offer_id":68143656075580,"sku":"RH-1013-B","price":1499.95,"currency_code":"USD","in_stock":true},{"title":"Bushwacker Pocket Flares \/ Without Tire Carrier","offer_id":68143656108348,"sku":"RH-1013-C","price":949.95,"currency_code":"USD","in_stock":true},{"title":"Bushwacker Flat Flares \/ With Tire Carrier","offer_id":68143656141116,"sku":"RH-1013-D","price":1499.95,"currency_code":"USD","in_stock":true},{"title":"Bushwacker Flat Flares \/ Without Tire Carrier","offer_id":68143656173884,"sku":"RH-1013-E","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1013-2.jpg?v=1794436089"},{"product_id":"rock-hard-4x4-replacement-wheel-stud-for-non-jl-tire-carriers-1-2in-x-20","title":"Rock Hard 4x4 Replacement Wheel Stud for Non-JL Tire Carriers | 1\/2in x 20 | P\/N RH-1329","description":"\u003cp\u003eA replacement 1\/2in x 20 wheel stud for Rock Hard 4x4 tire carriers on every Jeep platform except the Wrangler JL. Use it to replace a damaged or missing stud on the spare tire mount.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplacement stud for all non-JL Rock Hard 4x4 tire carriers\u003c\/li\u003e\n\u003cli\u003e1\/2in x 20 thread\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSize: 1\/2in x 20\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 wheel stud\u003c\/li\u003e\n\u003cli\u003eShipping weight: 1 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 8 x 6 x 3 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eDoes not fit Rock Hard 4x4 tire carriers for the 2018-2026 Jeep Wrangler JL.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1329\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143656862012,"sku":"RH-1329","price":8.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1329-2.jpg?v=1794436100"},{"product_id":"rock-hard-4x4-patriot-series-tube-slider-rocker-guards-jeep-wrangler-jl-4-door-2018-2026","title":"Rock Hard 4x4 Patriot Series Tube Slider Rocker Guards | Jeep Wrangler JL 4-Door (2018-2026) | P\/N RH-90104","description":"\u003cp\u003eBolt-on tubular rock sliders for the 4-door Wrangler JL. A 1-3\/4in tube step is welded to heavy wall rectangular steel rails, giving a step for getting in and out and a steel buffer that keeps the body panels off the rocks. Choose angled up, or angled down with a step 1.5in lower.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWelded 1-3\/4in .120 wall tubular step\u003c\/li\u003e\n\u003cli\u003e2in x 3in steel mounting rails, .188 wall (3\/16in)\u003c\/li\u003e\n\u003cli\u003eEnd caps welded shut to keep out debris, water and dirt\u003c\/li\u003e\n\u003cli\u003e3\/8in thick steel brackets at the body mount locations\u003c\/li\u003e\n\u003cli\u003eMounts to the pinch seam, to the body bolts with tabs over 3 times the factory width, and through the floor in existing holes\u003c\/li\u003e\n\u003cli\u003eShims in the hardware pack align the guards under the body\u003c\/li\u003e\n\u003cli\u003eReplaces the factory Rubicon rails\u003c\/li\u003e\n\u003cli\u003eBolt-on install, no welding\u003c\/li\u003e\n\u003cli\u003eNo fender trimming required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMounting rail: 2in x 3in steel, .188 wall (3\/16in)\u003c\/li\u003e\n\u003cli\u003eStep tube: 1-3\/4in, .120 wall\u003c\/li\u003e\n\u003cli\u003eBrackets: 3\/8in steel\u003c\/li\u003e\n\u003cli\u003eStep out (door to top of rail): 3in\u003c\/li\u003e\n\u003cli\u003eStep down (bottom of door cutout to top of rail): 4in (Angled Up), 5.5in (Angled Down)\u003c\/li\u003e\n\u003cli\u003eRail to top of tube: 3.5in\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth and semi-gloss (raw, paintable finish available on request)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 100 lb (Angled Up), 112 lb (Angled Down)\u003c\/li\u003e\n\u003cli\u003eShipping carton: 72 x 16 x 10 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompatible with the 2026 factory front frame braces: unbolt the braces before install and reinstall them after if wanted.\u003c\/li\u003e\n\u003cli\u003eNot compatible with a body lift.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler JL 4-Door (2018-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-90104 - Angled Up\u003c\/li\u003e\n\u003cli\u003eMPN RH-90106 - Angled Down\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Angled Up","offer_id":68143657222460,"sku":"RH-90104","price":999.95,"currency_code":"USD","in_stock":true},{"title":"Angled Down","offer_id":68143657255228,"sku":"RH-90106","price":999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-90104-2.jpg?v=1794436109"},{"product_id":"rock-hard-4x4-hardhat-differential-cover-rubicon-m220-rear-jeep-wrangler-jl-2018-2026-gladiator-jt-2020-2026","title":"Rock Hard 4x4 HardHat Differential Cover | Rubicon M220 Rear | Jeep Wrangler JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N RH-9080","description":"\u003cp\u003eThe Rock Hard 4x4 HardHat Differential Cover is a 1\/4in plate steel cover for the M220 rear differential housing on Jeep Wrangler JL and Gladiator JT Rubicon models. Built-in angles deflect impacts, and a laser cut opening gives access for oil changes.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick plate steel with built-in impact deflecting angles\u003c\/li\u003e\n\u003cli\u003eLaser cut oil change cutout\u003c\/li\u003e\n\u003cli\u003eMoves hard impacts away from the internals while keeping clearance for the suspension and track bar\u003c\/li\u003e\n\u003cli\u003eDesigned around factory tie rods and track bars\u003c\/li\u003e\n\u003cli\u003eSimple hand tool install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate steel\u003c\/li\u003e\n\u003cli\u003eFinish: raw (bare metal), red or black light texture powder coat\u003c\/li\u003e\n\u003cli\u003eHardware: zinc-coated\u003c\/li\u003e\n\u003cli\u003eBacking plate: stainless steel, preinstalled on powder coated versions, not installed on raw\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 7 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 12 x 6 x 4 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-9080 - Raw\u003c\/li\u003e\n\u003cli\u003eMPN RH-9081 - Red Powder Coat\u003c\/li\u003e\n\u003cli\u003eMPN RH-9082 - Black Powder Coat\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Raw","offer_id":68143657484604,"sku":"RH-9080","price":109.95,"currency_code":"USD","in_stock":true},{"title":"Red Powder Coat","offer_id":68143657517372,"sku":"RH-9081","price":119.95,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coat","offer_id":68143657550140,"sku":"RH-9082","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-9081-2.jpg?v=1794436120"},{"product_id":"rock-hard-4x4-molle-cage-cargo-wrap-rear-section-jeep-gladiator-jt-2020-2026","title":"Rock Hard 4x4 MOLLE Cage Cargo Wrap | Rear Section | Jeep Gladiator JT (2020-2026) | P\/N RH-1408","description":"\u003cp\u003eThe MOLLE Cage Cargo Wrap fits around the rear section of the Rock Hard 4x4 RH-80700 Rear Cage Brace System in the Jeep Gladiator JT. MOLLE webbing gives mounting points for flashlights, knives, tools and other gear, and a sewn-in zippered pocket adds closed storage. The wrap attaches with heavy duty Velcro, so no drilling is needed.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1in heavy duty MOLLE webbing\u003c\/li\u003e\n\u003cli\u003ePadded cells with foam padding inside each wrap to prevent wrinkling\u003c\/li\u003e\n\u003cli\u003eSewn-in heavy duty pocket with zipper\u003c\/li\u003e\n\u003cli\u003eAll metal hardware\u003c\/li\u003e\n\u003cli\u003eAttaches with heavy duty Velcro, no drilling\u003c\/li\u003e\n\u003cli\u003eCut and sewn to fit around the cage bars without slipping\u003c\/li\u003e\n\u003cli\u003eInstalls with hard top panels in place: fit it upside down, then rotate into position\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFits: rear section of the Rock Hard 4x4 RH-80700 cage\u003c\/li\u003e\n\u003cli\u003eSystem: MOLLE (Modular Lightweight Load-carrying Equipment)\u003c\/li\u003e\n\u003cli\u003eMaterials: heavy duty fabric, metal hardware, industrial grade Velcro\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 2 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 12 x 6 x 4 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWorks with Rock Hard 4x4 Sport Cage padding kits.\u003c\/li\u003e\n\u003cli\u003eCompatible with a hard top, and with a hard top plus a mesh style sun shade.\u003c\/li\u003e\n\u003cli\u003eNo welded accessory mounting plate on the cage is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1408\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143657943356,"sku":"RH-1408","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1401-2.jpg?v=1794436131"},{"product_id":"rock-hard-4x4-fabrication-collar-bolt-in-locking-collar-with-cap","title":"Rock Hard 4x4 Fabrication Collar | Bolt-In Locking Collar with Cap | P\/N RH-1150","description":"\u003cp\u003eThe patented locking collar used in Rock Hard 4x4 cage systems, sold as a fabrication ready collar for tube projects. Each 1\/2in thick CNC machined steel cap bolts to its matching collar with six grade 8 socket head cap screws, forming a joint that assembles and comes apart without welding or cutting.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePatented design (US6908107), the same collar used in Rock Hard 4x4 cage systems\u003c\/li\u003e\n\u003cli\u003eAssembles and disassembles without welding or cutting\u003c\/li\u003e\n\u003cli\u003eFabrication ready for custom tube work and mounts\u003c\/li\u003e\n\u003cli\u003eFive inside diameters\u003c\/li\u003e\n\u003cli\u003eDesigned, manufactured and shipped in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/2in thick CNC machined steel collar and cap\u003c\/li\u003e\n\u003cli\u003eHardware: six 5\/16in x 1in grade 8 socket head cap screws\u003c\/li\u003e\n\u003cli\u003eInside diameters: 1.5in, 1.75in, 2in, 2.25in, 3in\u003c\/li\u003e\n\u003cli\u003eFinish: raw, bare metal\u003c\/li\u003e\n\u003cli\u003ePatent: US6908107\u003c\/li\u003e\n\u003cli\u003eShipping weight (1.5in): 2 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton (1.5in): 8 x 6 x 3 in\u003c\/li\u003e\n\u003cli\u003eShipping weight (1.75in): 2 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton (1.75in): 8 x 6 x 3 in\u003c\/li\u003e\n\u003cli\u003eShipping weight (2in): 2 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton (2in): 8 x 6 x 3 in\u003c\/li\u003e\n\u003cli\u003eShipping weight (2.25in): 2 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton (2.25in): 8 x 6 x 3 in\u003c\/li\u003e\n\u003cli\u003eShipping weight (3in): 3 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton (3in): 8 x 6 x 3 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eShips in raw bare metal so it can be painted or coated to match.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-1150 - 1.5in\u003c\/li\u003e\n\u003cli\u003eMPN RH-1175 - 1.75in\u003c\/li\u003e\n\u003cli\u003eMPN RH-1200 - 2in\u003c\/li\u003e\n\u003cli\u003eMPN RH-1225 - 2.25in\u003c\/li\u003e\n\u003cli\u003eMPN RH-1300 - 3in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"1.5in","offer_id":68143658434876,"sku":"RH-1150","price":59.95,"currency_code":"USD","in_stock":true},{"title":"1.75in","offer_id":68143658467644,"sku":"RH-1175","price":59.95,"currency_code":"USD","in_stock":true},{"title":"2in","offer_id":68143658500412,"sku":"RH-1200","price":59.95,"currency_code":"USD","in_stock":true},{"title":"2.25in","offer_id":68143658533180,"sku":"RH-1225","price":64.95,"currency_code":"USD","in_stock":true},{"title":"3in","offer_id":68143658565948,"sku":"RH-1300","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1150-2.jpg?v=1794436141"},{"product_id":"rock-hard-4x4-chmsl-3rd-brake-light-for-2-1-2in-spare-tire-center-hole","title":"Rock Hard 4x4 CHMSL 3rd Brake Light | For 2-1\/2in Spare Tire Center Hole | P\/N RH-2002-TL","description":"\u003cp\u003eThis center high mount stop light (CHMSL) moves the 3rd brake light from the factory location into the center hole of the spare tire, where the spare shields it from debris and damage. It is a common addition when an aftermarket tire carrier is installed.\u003c\/p\u003e\u003cp\u003eThe light connects to the factory harness by splicing a few wires. A two piece harness with weather resistant connectors and a quick detach weatherproof plug lets the light come off without tools when the spare needs to be removed.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMounts in a 2-1\/2in spare tire center hole\u003c\/li\u003e\n\u003cli\u003eSplices into the factory 3rd brake light harness\u003c\/li\u003e\n\u003cli\u003eTwo piece harness with weather resistant connectors\u003c\/li\u003e\n\u003cli\u003eQuick detach weatherproof plug for spare tire removal without tools\u003c\/li\u003e\n\u003cli\u003eHigh visibility, fully functional 3rd brake light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMounting: 2-1\/2in inside diameter wheel center hole\u003c\/li\u003e\n\u003cli\u003eIncludes: 3rd brake light, installation instructions\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 1 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 4 x 4 x 4 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFits wheels with a 2-1\/2in center hole, the standard size used by most wheel manufacturers.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-2002-TL\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143658860860,"sku":"RH-2002-TL","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-2002-TL-2.jpg?v=1794436150"},{"product_id":"rock-hard-4x4-tank-mount-rear-tire-carrier","title":"Rock Hard 4x4 Tank Mount | Rear Tire Carrier | P\/N RH-2003-LT","description":"\u003cp\u003eThe Rock Hard 4x4 tank mount bolts to a Rock Hard 4x4 rear tire carrier and gives a secure place for fuel containers, water jugs, CO2 tanks and other storage. A welded upright gives a fastening point, and heavy duty straps and buckles are included to cinch down larger items.\u003c\/p\u003e\u003cp\u003eIt mounts with a heavy duty steel post and weather resistant hardware, with no welding. It is offered for the driver side or the passenger side of the carrier.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSteel construction with welded upright\u003c\/li\u003e\n\u003cli\u003eHeavy duty straps and buckles included\u003c\/li\u003e\n\u003cli\u003eHolds jerry cans, RotopaX, CO2 tanks and Powertank bottles\u003c\/li\u003e\n\u003cli\u003eFits single or dual 2-gallon Gen1 RotopaX containers\u003c\/li\u003e\n\u003cli\u003eWelded CB antenna tab\u003c\/li\u003e\n\u003cli\u003eBolt-on install with steel post, no welding\u003c\/li\u003e\n\u003cli\u003eWorks alongside the Rock Hard 4x4 Rock Rack cargo basket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eInside bottom plate: 13-3\/4 x 7in\u003c\/li\u003e\n\u003cli\u003eMaterial: steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss (raw, paintable finish available on request)\u003c\/li\u003e\n\u003cli\u003eHardware: weather resistant mounting hardware, straps and buckles\u003c\/li\u003e\n\u003cli\u003eSpare tire: up to 38in (factory Jeep Wrangler)\u003c\/li\u003e\n\u003cli\u003eIncludes: tank mount, hardware, installation instructions\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 20 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 29 x 25 x 13 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDriver side fits all Rock Hard 4x4 bumper mounted tire carriers.\u003c\/li\u003e\n\u003cli\u003ePassenger side fits Rock Hard 4x4 RH-5001 and RH-2001-C Wrangler and CJ tire carriers. It does not fit the passenger side of Jeep Cherokee XJ, Grand Cherokee ZJ or Grand Cherokee WJ Rock Hard 4x4 rear bumper and tire carrier setups.\u003c\/li\u003e\n\u003cli\u003eGen2 RotopaX containers have not been tested.\u003c\/li\u003e\n\u003cli\u003eSome accessories and tank systems may need modification to fit.\u003c\/li\u003e\n\u003cli\u003eEarlier versions shipped with a metal J-hook; current kits use straps and buckles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-2003-LT - Driver Side\u003c\/li\u003e\n\u003cli\u003eMPN RH-2003-RT - Passenger Side\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Driver Side","offer_id":68143659286844,"sku":"RH-2003-LT","price":199.95,"currency_code":"USD","in_stock":true},{"title":"Passenger Side","offer_id":68143659319612,"sku":"RH-2003-RT","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-2003-LT-2.jpg?v=1794436160"},{"product_id":"rock-hard-4x4-patriot-series-rocker-guards-jeep-wrangler-tj-1997-2006","title":"Rock Hard 4x4 Patriot Series Rocker Guards | Jeep Wrangler TJ (1997-2006) | P\/N RH-3001","description":"\u003cp\u003eRock Hard 4x4 Patriot Series Rocker Guards protect the tub of the Jeep Wrangler TJ with low profile, smooth sided 3\/16in steel armor. They bolt on with welded spacers, and the hardware sits in tapered holes so bolt heads do not catch or shear on rocks.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRaw (bare metal) or black powder coat finish\u003c\/li\u003e\n\u003cli\u003eAvailable with or without welded tube sliders; the tube adds body and fender protection and a 4in step\u003c\/li\u003e\n\u003cli\u003eBolt heads protected in tapered holes\u003c\/li\u003e\n\u003cli\u003eWelded spacers for the skid surface under the floor pan\u003c\/li\u003e\n\u003cli\u003eShortened upper mounting surface works with most aftermarket fender flares\u003c\/li\u003e\n\u003cli\u003eNo trimming of the factory fenders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 3\/16in steel, laser cut and CNC bent\u003c\/li\u003e\n\u003cli\u003eSide plate height up the body: 5-7\/8in\u003c\/li\u003e\n\u003cli\u003eTop of slider under door sill: 51.5in\u003c\/li\u003e\n\u003cli\u003eBottom of slider at bend: 45.75in\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-on, no welding\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 54 lb (Without Tube Sliders), 60 lb (With Tube Sliders)\u003c\/li\u003e\n\u003cli\u003eShipping carton: 54 x 11 x 7 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWith aftermarket fenders, check that the sliders fit inside the fender footprint.\u003c\/li\u003e\n\u003cli\u003eRaw versions ship bare metal for your own finish or for fabricating your own tubes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler TJ (1997-2006)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-3001 - Without \/ Raw\u003c\/li\u003e\n\u003cli\u003eMPN RH-3001-C - Without \/ Black Powder Coat\u003c\/li\u003e\n\u003cli\u003eMPN RH-3001-S - With \/ Raw\u003c\/li\u003e\n\u003cli\u003eMPN RH-3001-SC - With \/ Black Powder Coat\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Without \/ Raw","offer_id":68143659778364,"sku":"RH-3001","price":319.95,"currency_code":"USD","in_stock":true},{"title":"Without \/ Black Powder Coat","offer_id":68143659811132,"sku":"RH-3001-C","price":449.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Raw","offer_id":68143659843900,"sku":"RH-3001-S","price":379.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Black Powder Coat","offer_id":68143659876668,"sku":"RH-3001-SC","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-3001-2.jpg?v=1794436171"},{"product_id":"rock-hard-4x4-patriot-series-tube-slider-rocker-guards-ford-bronco-2-door-2021-2026","title":"Rock Hard 4x4 Patriot Series Tube Slider Rocker Guards | Ford Bronco 2-Door (2021-2026) | P\/N RH-60100","description":"\u003cp\u003ePatriot Series Tube Slider Rocker Guards replace the factory rock rails on the Ford Bronco 2-Door with 2in x 3in steel rails and a welded 1-3\/4in tube step. The step makes getting in and out easier and keeps the body off the rocks. They mount to the pinch seam, the body bolts and through the floor in existing holes.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMounting rail: 2in x 3in steel, .188 wall (3\/16in)\u003c\/li\u003e\n\u003cli\u003eWelded-shut end caps keep out debris, water and dirt\u003c\/li\u003e\n\u003cli\u003e3\/8in steel brackets welded at the body mount locations\u003c\/li\u003e\n\u003cli\u003e1-3\/4in .120 wall tube step welded on\u003c\/li\u003e\n\u003cli\u003eMounts to the pinch seam, the body bolts and through the floor in existing holes\u003c\/li\u003e\n\u003cli\u003eShims included to align the rails\u003c\/li\u003e\n\u003cli\u003eBolt-on, no welding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRail: 2in x 3in, .188 wall steel\u003c\/li\u003e\n\u003cli\u003eTube: 1-3\/4in, .120 wall\u003c\/li\u003e\n\u003cli\u003eBrackets: 3\/8in steel\u003c\/li\u003e\n\u003cli\u003eStep out (door to top of rail): 3.5in\u003c\/li\u003e\n\u003cli\u003eStep down (door cutout to top of rail): 1.75in Angled Up, 5in Flat Step and Angled Down\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss (raw on request)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 98 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 61 x 20 x 15 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNot body lift compatible.\u003c\/li\u003e\n\u003cli\u003eReplaces the factory rock rails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 2-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-60100 - Angled Up\u003c\/li\u003e\n\u003cli\u003eMPN RH-60101 - Flat Step\u003c\/li\u003e\n\u003cli\u003eMPN RH-60102 - Angled Down\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Angled Up","offer_id":68143668592956,"sku":"RH-60100","price":999.95,"currency_code":"USD","in_stock":true},{"title":"Flat Step","offer_id":68143668625724,"sku":"RH-60101","price":1199.95,"currency_code":"USD","in_stock":true},{"title":"Angled Down","offer_id":68143668658492,"sku":"RH-60102","price":999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60100-2.jpg?v=1794436367"},{"product_id":"rock-hard-4x4-patriot-series-tube-slider-rocker-guards-ford-bronco-4-door-2021-2026","title":"Rock Hard 4x4 Patriot Series Tube Slider Rocker Guards | Ford Bronco 4-Door (2021-2026) | P\/N RH-60104","description":"\u003cp\u003ePatriot Series Tube Slider Rocker Guards replace the factory rock rails on the Ford Bronco 4-Door with 2in x 3in steel rails and a welded 1-3\/4in tube step. The step makes getting in and out easier and keeps the body off the rocks. They mount to the pinch seam, the body bolts and through the floor in existing holes.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMounting rail: 2in x 3in steel, .188 wall (3\/16in)\u003c\/li\u003e\n\u003cli\u003eWelded-shut end caps keep out debris, water and dirt\u003c\/li\u003e\n\u003cli\u003e3\/8in steel brackets welded at the body mount locations\u003c\/li\u003e\n\u003cli\u003e1-3\/4in .120 wall tube step welded on\u003c\/li\u003e\n\u003cli\u003eMounts to the pinch seam, the body bolts and through the floor in existing holes\u003c\/li\u003e\n\u003cli\u003eShims included to align the rails\u003c\/li\u003e\n\u003cli\u003eBolt-on, no welding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRail: 2in x 3in, .188 wall steel\u003c\/li\u003e\n\u003cli\u003eTube: 1-3\/4in, .120 wall\u003c\/li\u003e\n\u003cli\u003eBrackets: 3\/8in steel\u003c\/li\u003e\n\u003cli\u003eStep out (door to top of rail): 3.5in\u003c\/li\u003e\n\u003cli\u003eStep down (door cutout to top of rail): 1.5in Angled Up, 5in Angled Down\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss (raw on request)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 114 lb (Angled Up)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 132 lb (Angled Down)\u003c\/li\u003e\n\u003cli\u003eShipping carton: 79 x 20 x 15 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNot body lift compatible.\u003c\/li\u003e\n\u003cli\u003eReplaces the factory rock rails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 4-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-60104 - Angled Up\u003c\/li\u003e\n\u003cli\u003eMPN RH-60106 - Angled Down\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Angled Up","offer_id":68143669182780,"sku":"RH-60104","price":999.95,"currency_code":"USD","in_stock":true},{"title":"Angled Down","offer_id":68143669215548,"sku":"RH-60106","price":999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60104-2.jpg?v=1794436378"},{"product_id":"rock-hard-4x4-patriot-series-full-width-front-bumper-ford-bronco-2021-2026","title":"Rock Hard 4x4 Patriot Series Full Width Front Bumper | Ford Bronco (2021-2026) | P\/N RH-60210","description":"\u003cp\u003eThe Patriot Series Full Width Front Bumper is built from 1\/4in thick plate steel for the Ford Bronco 2021-2026 and works with the factory parking sensors, adaptive cruise radar, collision avoidance system and front camera. It is laser cut, CNC bent and hand welded, with 1in thick recovery tabs welded front and back. Add-ons include a winch plate (RH-60211), fog light plates and a light hoop with camera relocation (RH-60212).\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick plate steel\u003c\/li\u003e\n\u003cli\u003eLaser cut, CNC bent and hand welded\u003c\/li\u003e\n\u003cli\u003e100% bolt-on design\u003c\/li\u003e\n\u003cli\u003e1in thick double welded recovery tabs\u003c\/li\u003e\n\u003cli\u003eHi-Lift jack recovery points\u003c\/li\u003e\n\u003cli\u003eFlat-towable with Rock Hard 4x4 tow bar bracket kits (RH-8002-BO, RH-8002-RM, RH-8002-RS)\u003c\/li\u003e\n\u003cli\u003eAccepts aftermarket cube and factory fog lights with optional fog light mounting plates; ships with block off plates\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate steel\u003c\/li\u003e\n\u003cli\u003eBumper weight: 90 lb\u003c\/li\u003e\n\u003cli\u003eCenter grille to center bumper: 1.75in\u003c\/li\u003e\n\u003cli\u003eCenter grille to D-ring tabs: 5in\u003c\/li\u003e\n\u003cli\u003eCenter grille to winch plate face: 9in\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003cli\u003eShipping weight: 178 lb\u003c\/li\u003e\n\u003cli\u003eShipping size on pallet: 80 x 36 x 21 in\u003c\/li\u003e\n\u003cli\u003eShips by truck freight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eCompatible with front parking sensors, adaptive cruise control radar, collision avoidance system, forward facing camera and washer, and the factory front lower skid plate (steel only, not plastic).\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60210\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143669510460,"sku":"RH-60210","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60210-2.jpg?v=1794436389"},{"product_id":"rock-hard-4x4-patriot-series-aluminum-full-width-front-bumper-ford-bronco-2021-2026","title":"Rock Hard 4x4 Patriot Series Aluminum Full Width Front Bumper | Ford Bronco (2021-2026) | P\/N RH-60240","description":"\u003cp\u003eThe Patriot Series Aluminum Full Width Front Bumper is built from 1\/4in thick plate aluminum for the Ford Bronco 2021-2026 and works with the factory parking sensors, adaptive cruise radar, collision avoidance system and front camera. It is laser cut, CNC bent and hand welded, with 1in thick recovery tabs welded front and back. Add-ons include a winch plate (RH-60211), fog light plates and a light hoop with camera relocation (RH-60212).\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick plate aluminum\u003c\/li\u003e\n\u003cli\u003eLaser cut, CNC bent and hand welded\u003c\/li\u003e\n\u003cli\u003e100% bolt-on design\u003c\/li\u003e\n\u003cli\u003e1in thick double welded recovery tabs\u003c\/li\u003e\n\u003cli\u003eHi-Lift jack recovery points\u003c\/li\u003e\n\u003cli\u003eFlat-towable with Rock Hard 4x4 tow bar bracket kits (RH-8002-BO, RH-8002-RM, RH-8002-RS)\u003c\/li\u003e\n\u003cli\u003eAccepts aftermarket cube fog lights with optional fog light mounting plates; ships with delete plates\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate aluminum\u003c\/li\u003e\n\u003cli\u003eBumper weight: 28 lb\u003c\/li\u003e\n\u003cli\u003eCenter grille to center bumper: 1.75in\u003c\/li\u003e\n\u003cli\u003eCenter grille to D-ring tabs: 5in\u003c\/li\u003e\n\u003cli\u003eCenter grille to winch plate face: 9in\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003cli\u003eShipping weight: 50 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 79 x 19 x 14 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eCompatible with front parking sensors, adaptive cruise control radar, collision avoidance system, forward facing camera and washer, and the factory front lower skid plate (steel only, not plastic).\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60240\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143671214396,"sku":"RH-60240","price":1449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60210-2_42dd1edb-4369-4f1b-80f6-02ee410fce18.jpg?v=1794436398"},{"product_id":"rock-hard-4x4-fog-light-mounting-plates-for-rh-60210-front-bumper-ford-bronco-2021-2026","title":"Rock Hard 4x4 Fog Light Mounting Plates for RH-60210 Front Bumper | Ford Bronco (2021-2026) | P\/N RH-60210-H","description":"\u003cp\u003eThese fog light mounting plates replace the block off plates in the Rock Hard 4x4 RH-60210 Patriot Series Full Width Front Bumper on the Ford Bronco 2021-2026. They hold the factory fog lights or standard 3in cube or pod lights. Sold as a pair.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFits factory fog lights\u003c\/li\u003e\n\u003cli\u003eFits standard 3in cube or pod lights\u003c\/li\u003e\n\u003cli\u003eReplaces the bumper's standard block off plates\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFinish: powder coat (bare steel available on request)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMade for the Rock Hard 4x4 RH-60210 front bumper.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60210-H\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143671476540,"sku":"RH-60210-H","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60210-H-2.jpg?v=1794436408"},{"product_id":"rock-hard-4x4-winch-mounting-plate-for-front-bumper-ford-bronco-2021-2026","title":"Rock Hard 4x4 Winch Mounting Plate for Front Bumper | Ford Bronco (2021-2026) | P\/N RH-60211","description":"\u003cp\u003eThe Winch Mounting Plate bolts into existing holes in the Rock Hard 4x4 RH-60210 and RH-60240 front bumpers on the Ford Bronco 2021-2026. It is 1\/4in thick steel with 3\/16in steel braces. Included plug-and-play harnesses move the two center parking sensors (if equipped) to the face of the winch plate so they keep working.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick plate steel\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/16in thick steel braces\u003c\/li\u003e\n\u003cli\u003eLaser cut and CNC bent\u003c\/li\u003e\n\u003cli\u003eBolts into existing bumper holes, no drilling or cutting\u003c\/li\u003e\n\u003cli\u003ePlug-and-play harnesses relocate the 2 center parking sensors\u003c\/li\u003e\n\u003cli\u003eFits WARN VR and VR EVO series winches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate steel\u003c\/li\u003e\n\u003cli\u003eBraces: 3\/16in steel\u003c\/li\u003e\n\u003cli\u003eShipping weight: 42 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 36 x 14 x 9 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRequires a Rock Hard 4x4 RH-60210 or RH-60240 front bumper.\u003c\/li\u003e\n\u003cli\u003eLarger body winches such as the WARN ZEON do not fit.\u003c\/li\u003e\n\u003cli\u003eCompatible with front parking sensors, adaptive cruise radar, collision avoidance, forward camera and washer, and the factory front lower skid plate (steel or plastic).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60211\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143671738684,"sku":"RH-60211","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60211-2.jpg?v=1794436419"},{"product_id":"rock-hard-4x4-light-mount-with-camera-relocation-for-rh-60211-winch-plate-ford-bronco-2021-2026","title":"Rock Hard 4x4 Light Mount with Camera Relocation for RH-60211 Winch Plate | Ford Bronco (2021-2026) | P\/N RH-60212","description":"\u003cp\u003eThis winch guard and light hoop bolts onto the Rock Hard 4x4 RH-60211 winch plate on the Ford Bronco 2021-2026, using existing holes in the bumper and winch plate. It relocates the forward facing camera (if equipped) to the front of the hoop and includes a plug-and-play harness and washer nozzle extension. The top is predrilled for a 10in LED light bar or individual pods.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBolt-on, uses existing holes, no drilling or cutting\u003c\/li\u003e\n\u003cli\u003eRelocates the forward facing camera to the hoop\u003c\/li\u003e\n\u003cli\u003ePlug-and-play camera harness and washer nozzle extension included\u003c\/li\u003e\n\u003cli\u003ePredrilled holes inside the hoop to secure the harness\u003c\/li\u003e\n\u003cli\u003ePredrilled on top for a 10in LED light bar or individual pods\u003c\/li\u003e\n\u003cli\u003eDelete plate for the precut camera slot included\u003c\/li\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: black powder coat (bare steel available on request)\u003c\/li\u003e\n\u003cli\u003eShipping weight: 6 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 36 x 20 x 3 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRequires the Rock Hard 4x4 RH-60211 winch plate.\u003c\/li\u003e\n\u003cli\u003eLights sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60212\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143672164668,"sku":"RH-60212","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60212-2.jpg?v=1794436429"},{"product_id":"rock-hard-4x4-flat-tow-air-electrical-breakaway-ports-bracket-ford-bronco-2021-2026","title":"Rock Hard 4x4 Flat Tow Air\/Electrical\/Breakaway Ports Bracket | Ford Bronco (2021-2026) | P\/N RH-60261","description":"\u003cp\u003eThis bracket gives a solid mounting plate for flat towing air brake, electrical and breakaway connections on Rock Hard 4x4 flat-towable front bumpers for the Ford Bronco 2021-2026. It is laser cut and bolts directly to the bumper.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMounting plate for air brake, electrical and breakaway ports\u003c\/li\u003e\n\u003cli\u003eLaser cut to bolt directly to the bumper\u003c\/li\u003e\n\u003cli\u003eFits Rock Hard 4x4 steel and aluminum Bronco front bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRequires a Rock Hard 4x4 Ford Bronco 2021-2026 front bumper.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60261\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143672492348,"sku":"RH-60261","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60261-2.jpg?v=1794436439"},{"product_id":"rock-hard-4x4-tow-bar-bracket-kit-pair-for-rock-hard-4x4-bronco-front-bumpers-ford-bronco-2021-2026","title":"Rock Hard 4x4 Tow Bar Bracket Kit (Pair) for Rock Hard 4x4 Bronco Front Bumpers | Ford Bronco (2021-2026) | P\/N RH-8002-BO","description":"\u003cp\u003eThis bolt-on bracket kit adapts a Ford Bronco 2021-2026 with a Rock Hard 4x4 front bumper to a Blue Ox, Ready Brute, Demco, Roadmaster or Reese tow bar. The brackets tie into the frame horns through the bumper mounts, and each kit is laser cut and formed for its tow bar, with computer-set spacing for the receiving pins.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBolts to Rock Hard 4x4 Bronco front bumpers, steel or aluminum\u003c\/li\u003e\n\u003cli\u003eTies into the frame horns through the bumper mounting system\u003c\/li\u003e\n\u003cli\u003eLaser cut and formed for the chosen tow bar brand\u003c\/li\u003e\n\u003cli\u003eSteel construction with weather resistant hardware\u003c\/li\u003e\n\u003cli\u003eBolt-on, no welding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss\u003c\/li\u003e\n\u003cli\u003eQuantity: pair (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 12 lb (Blue Ox and Roadmaster)\u003c\/li\u003e\n\u003cli\u003eShipping carton: 12 x 8 x 3 in (Blue Ox and Roadmaster)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with the factory Ford front bumper.\u003c\/li\u003e\n\u003cli\u003eWith a Ready Brute tow bar, use their Blue Ox style ends.\u003c\/li\u003e\n\u003cli\u003eWiring harness and braking system harness are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-8002-BO - Blue Ox \/ Ready Brute \/ Demco\u003c\/li\u003e\n\u003cli\u003eMPN RH-8002-RM - Roadmaster\u003c\/li\u003e\n\u003cli\u003eMPN RH-8002-RS - Reese\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Blue Ox \/ Ready Brute \/ Demco","offer_id":68143672852796,"sku":"RH-8002-BO","price":119.95,"currency_code":"USD","in_stock":true},{"title":"Roadmaster","offer_id":68143672885564,"sku":"RH-8002-RM","price":119.95,"currency_code":"USD","in_stock":true},{"title":"Reese","offer_id":68143672918332,"sku":"RH-8002-RS","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-8002-BO-2.jpg?v=1794436448"},{"product_id":"rock-hard-4x4-patriot-series-rear-bumper-ford-bronco-2021-2026","title":"Rock Hard 4x4 Patriot Series Rear Bumper | Ford Bronco (2021-2026) | P\/N RH-60300","description":"\u003cp\u003eThe Patriot Series Rear Bumper replaces the Ford Bronco 2021-2026 rear bumper with 1\/4in thick plate steel. High clearance tapered sides maximize departure angle, and it keeps the parking sensors and the factory hitch (if equipped). Installation is fully bolt-on with no cutting, trimming or drilling.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick plate steel\u003c\/li\u003e\n\u003cli\u003e100% bolt-on, no cutting, trimming or drilling\u003c\/li\u003e\n\u003cli\u003eParking and reverse sensor compatible (grommets and delete plugs included)\u003c\/li\u003e\n\u003cli\u003eFactory hitch compatible (if equipped)\u003c\/li\u003e\n\u003cli\u003eHigh clearance tapered sides\u003c\/li\u003e\n\u003cli\u003e1in thick double welded recovery tabs\u003c\/li\u003e\n\u003cli\u003eLicense plate mount included, reuses the plate light\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate steel\u003c\/li\u003e\n\u003cli\u003eBumper weight: 130 lb\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003cli\u003eShipping weight: 178 lb\u003c\/li\u003e\n\u003cli\u003eShipping size on pallet: 80 x 36 x 21 in\u003c\/li\u003e\n\u003cli\u003eShips by truck freight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOptional muffler skid plates: RH-60507 (3\/16in steel) and RH-60547 (1\/4in aluminum).\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60300\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143673868604,"sku":"RH-60300","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60340-2.jpg?v=1794436459"},{"product_id":"rock-hard-4x4-aluminum-patriot-series-rear-bumper-ford-bronco-2021-2026","title":"Rock Hard 4x4 Aluminum Patriot Series Rear Bumper | Ford Bronco (2021-2026) | P\/N RH-60340","description":"\u003cp\u003eThe Aluminum Patriot Series Rear Bumper replaces the Ford Bronco 2021-2026 rear bumper with 1\/4in thick plate aluminum. High clearance tapered sides maximize departure angle, and it keeps the parking sensors and the factory hitch (if equipped). Installation is fully bolt-on with no cutting, trimming or drilling.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick plate aluminum\u003c\/li\u003e\n\u003cli\u003e100% bolt-on, no cutting, trimming or drilling\u003c\/li\u003e\n\u003cli\u003eParking and reverse sensor compatible (grommets and delete plugs included)\u003c\/li\u003e\n\u003cli\u003eFactory hitch compatible (if equipped)\u003c\/li\u003e\n\u003cli\u003eHigh clearance tapered sides\u003c\/li\u003e\n\u003cli\u003e1in thick double welded recovery tabs\u003c\/li\u003e\n\u003cli\u003eLicense plate mount included, reuses the plate light\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate aluminum\u003c\/li\u003e\n\u003cli\u003eBumper weight: 40 lb\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003cli\u003eShipping weight: 47 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 76 x 19 x 15 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOptional muffler skid plates: RH-60507 (3\/16in steel) and RH-60547 (1\/4in aluminum).\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60340\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143674851644,"sku":"RH-60340","price":1349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60340-2_844bd3a8-1961-4a13-a71b-b6c3b43bfae7.jpg?v=1794436469"},{"product_id":"rock-hard-4x4-patriot-series-rear-bumper-with-tire-carrier-ford-bronco-2021-2026","title":"Rock Hard 4x4 Patriot Series Rear Bumper with Tire Carrier | Ford Bronco (2021-2026) | P\/N RH-60301","description":"\u003cp\u003eThe Patriot Series Rear Bumper with Tire Carrier is 1\/4in thick plate steel and mounts to the frame, taking the spare tire weight off the Ford Bronco tailgate and body. The adjustable carrier holds a spare up to 37in and swings on a serviceable hub with dual tapered bearings, closing with a dual-stage latch with a safety catch. It installs bolt-on with plug-and-play electrical connectors.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick plate steel\u003c\/li\u003e\n\u003cli\u003eFrame mounted bumper and tire carrier, no weight on the tailgate or body\u003c\/li\u003e\n\u003cli\u003eAdjustable spare tire mount: up and down, in and out\u003c\/li\u003e\n\u003cli\u003eServiceable hub with dual tapered bearings and zerk grease fitting\u003c\/li\u003e\n\u003cli\u003eDual-stage latch with safety catch\u003c\/li\u003e\n\u003cli\u003eDrop down safety pin prevents closure when open on uneven ground\u003c\/li\u003e\n\u003cli\u003eBack-up camera compatible with included plug and play connector\u003c\/li\u003e\n\u003cli\u003eParking sensor compatible (grommets and delete plugs included)\u003c\/li\u003e\n\u003cli\u003eFactory hitch (if equipped) and factory 3rd brake light compatible\u003c\/li\u003e\n\u003cli\u003eWelded CB antenna mount and security tab for a cable lock\u003c\/li\u003e\n\u003cli\u003eTailgate vent plate and streamer bar apply preload to stop rattles\u003c\/li\u003e\n\u003cli\u003e1in thick double welded recovery tabs\u003c\/li\u003e\n\u003cli\u003eLicense plate mount included, reuses the plate light\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate steel\u003c\/li\u003e\n\u003cli\u003eBumper weight: 144 lb\u003c\/li\u003e\n\u003cli\u003eTire carrier weight: 76 lb\u003c\/li\u003e\n\u003cli\u003eSpare tire capacity: 37in (also with cargo basket or tank mounts)\u003c\/li\u003e\n\u003cli\u003eTailgate center to face of rear bumper: 3.5in\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003cli\u003eShipping weight: 221 lb\u003c\/li\u003e\n\u003cli\u003eShipping size on pallet: 80 x 36 x 21 in\u003c\/li\u003e\n\u003cli\u003eShips by truck freight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGrease the hub through the zerk fitting after water crossings or rain.\u003c\/li\u003e\n\u003cli\u003eOptional: driver side tank mount RH-2003-LT, passenger side tank mount RH-2003-RT, Rock Rack cargo mount RH-2004.\u003c\/li\u003e\n\u003cli\u003eHi-Lift jack mount sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60301\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143676555580,"sku":"RH-60301","price":1799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60301-2.jpg?v=1794436478"},{"product_id":"rock-hard-4x4-steel-complete-bellypan-skid-plate-system-ford-bronco-4-door-2021-2026","title":"Rock Hard 4x4 Steel Complete Bellypan Skid Plate System | Ford Bronco 4-Door (2021-2026) | P\/N RH-60502","description":"\u003cp\u003eThe Steel Complete Bellypan Skid Plate System covers the Ford Bronco 4-Door from frame rail to frame rail and from the oil pan to the tail of the gas tank in 3\/16in steel plate. It includes a front lower bash plate, oil pan and transmission skid with oil change access door, transfer case skid, resonator skid and fuel tank skid, all bolt-on with tapered washers that protect the bolt heads. Choose the version that matches your truck: with or without the factory fuel skid, and with a steel or plastic front bumper.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/16in steel plate\u003c\/li\u003e\n\u003cli\u003eCoverage from frame rail to frame rail, oil pan to tail of the gas tank\u003c\/li\u003e\n\u003cli\u003eFront lower bash skid connects from the front bumper underside to the first crossmember\u003c\/li\u003e\n\u003cli\u003eOil pan \/ transmission skid with oil change access door\u003c\/li\u003e\n\u003cli\u003eTransfer case skid connects to the main transmission crossmember\u003c\/li\u003e\n\u003cli\u003eFuel tank skid uses existing frame mounts with 2 included brackets\u003c\/li\u003e\n\u003cli\u003eTapered bolt head protecting washers\u003c\/li\u003e\n\u003cli\u003e100% bolt-on design\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePlate: 3\/16in steel\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003cli\u003eComponents: front lower bash skid plate, oil pan \/ transmission skid plate, transfer case skid plate, resonator skid plate, fuel tank skid plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo need to remove or replace the factory crossmember.\u003c\/li\u003e\n\u003cli\u003eMounts away from driveline components, no added vibration or noise.\u003c\/li\u003e\n\u003cli\u003eOptional muffler skid plate: RH-60507 (3\/16in steel) or RH-60547 (1\/4in aluminum).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 4-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-60502 - Without \/ Plastic\u003c\/li\u003e\n\u003cli\u003eMPN RH-60503 - With \/ Plastic\u003c\/li\u003e\n\u003cli\u003eMPN RH-60506 - With \/ Steel\u003c\/li\u003e\n\u003cli\u003eMPN RH-60509 - Without \/ Steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Without \/ Plastic","offer_id":68143677735228,"sku":"RH-60502","price":1999.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Plastic","offer_id":68143677767996,"sku":"RH-60503","price":1999.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Steel","offer_id":68143677800764,"sku":"RH-60506","price":1999.95,"currency_code":"USD","in_stock":true},{"title":"Without \/ Steel","offer_id":68143677833532,"sku":"RH-60509","price":1999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60502-2.jpg?v=1794436488"},{"product_id":"rock-hard-4x4-aluminum-complete-bellypan-skid-plate-system-ford-bronco-2-door-2021-2026","title":"Rock Hard 4x4 Aluminum Complete Bellypan Skid Plate System | Ford Bronco 2-Door (2021-2026) | P\/N RH-60540","description":"\u003cp\u003eThe Aluminum Complete Bellypan Skid Plate System covers the Ford Bronco 2-Door from frame rail to frame rail and from the oil pan to the tail of the gas tank in 1\/4in aluminum plate. It includes a front lower bash plate, oil pan and transmission skid with oil change access door, transfer case skid, resonator skid and fuel tank skid, all bolt-on with tapered washers that protect the bolt heads. Choose the version that matches your truck: with or without the factory fuel skid, and with a steel or plastic front bumper.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in aluminum plate\u003c\/li\u003e\n\u003cli\u003eCoverage from frame rail to frame rail, oil pan to tail of the gas tank\u003c\/li\u003e\n\u003cli\u003eFront lower bash skid connects from the front bumper underside to the first crossmember\u003c\/li\u003e\n\u003cli\u003eOil pan \/ transmission skid with oil change access door\u003c\/li\u003e\n\u003cli\u003eTransfer case skid connects to the main transmission crossmember\u003c\/li\u003e\n\u003cli\u003eFuel tank skid uses existing frame mounts with 2 included brackets\u003c\/li\u003e\n\u003cli\u003eTapered bolt head protecting washers\u003c\/li\u003e\n\u003cli\u003e100% bolt-on design\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePlate: 1\/4in aluminum\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003cli\u003eComponents: front lower bash skid plate, oil pan \/ transmission skid plate, transfer case skid plate, resonator skid plate, fuel tank skid plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo need to remove or replace the factory crossmember.\u003c\/li\u003e\n\u003cli\u003eMounts away from driveline components, no added vibration or noise.\u003c\/li\u003e\n\u003cli\u003eOptional muffler skid plate: RH-60507 (3\/16in steel) or RH-60547 (1\/4in aluminum).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 2-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-60540 - Without \/ Steel\u003c\/li\u003e\n\u003cli\u003eMPN RH-60541 - Without \/ Plastic\u003c\/li\u003e\n\u003cli\u003eMPN RH-60544 - With \/ Plastic\u003c\/li\u003e\n\u003cli\u003eMPN RH-60545 - With \/ Steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Without \/ Steel","offer_id":68143679078716,"sku":"RH-60540","price":2399.95,"currency_code":"USD","in_stock":true},{"title":"Without \/ Plastic","offer_id":68143679111484,"sku":"RH-60541","price":2399.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Plastic","offer_id":68143679144252,"sku":"RH-60544","price":2399.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Steel","offer_id":68143679177020,"sku":"RH-60545","price":2399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60500-2_9395e414-b7d6-49bb-80ff-ad9b49e9282e.jpg?v=1794436499"},{"product_id":"rock-hard-4x4-aluminum-complete-bellypan-skid-plate-system-ford-bronco-4-door-2021-2026","title":"Rock Hard 4x4 Aluminum Complete Bellypan Skid Plate System | Ford Bronco 4-Door (2021-2026) | P\/N RH-60542","description":"\u003cp\u003eThe Aluminum Complete Bellypan Skid Plate System covers the Ford Bronco 4-Door from frame rail to frame rail and from the oil pan to the tail of the gas tank in 1\/4in aluminum plate. It includes a front lower bash plate, oil pan and transmission skid with oil change access door, transfer case skid, resonator skid and fuel tank skid, all bolt-on with tapered washers that protect the bolt heads. Choose the version that matches your truck: with or without the factory fuel skid, and with a steel or plastic front bumper.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in aluminum plate\u003c\/li\u003e\n\u003cli\u003eCoverage from frame rail to frame rail, oil pan to tail of the gas tank\u003c\/li\u003e\n\u003cli\u003eFront lower bash skid connects from the front bumper underside to the first crossmember\u003c\/li\u003e\n\u003cli\u003eOil pan \/ transmission skid with oil change access door\u003c\/li\u003e\n\u003cli\u003eTransfer case skid connects to the main transmission crossmember\u003c\/li\u003e\n\u003cli\u003eFuel tank skid uses existing frame mounts with 2 included brackets\u003c\/li\u003e\n\u003cli\u003eTapered bolt head protecting washers\u003c\/li\u003e\n\u003cli\u003e100% bolt-on design\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePlate: 1\/4in aluminum\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003cli\u003eComponents: front lower bash skid plate, oil pan \/ transmission skid plate, transfer case skid plate, resonator skid plate, fuel tank skid plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo need to remove or replace the factory crossmember.\u003c\/li\u003e\n\u003cli\u003eMounts away from driveline components, no added vibration or noise.\u003c\/li\u003e\n\u003cli\u003eOptional muffler skid plate: RH-60507 (3\/16in steel) or RH-60547 (1\/4in aluminum).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 4-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN RH-60542 - Without \/ Plastic\u003c\/li\u003e\n\u003cli\u003eMPN RH-60543 - With \/ Plastic\u003c\/li\u003e\n\u003cli\u003eMPN RH-60546 - With \/ Steel\u003c\/li\u003e\n\u003cli\u003eMPN RH-60549 - Without \/ Steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Without \/ Plastic","offer_id":68143679766844,"sku":"RH-60542","price":2399.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Plastic","offer_id":68143679799612,"sku":"RH-60543","price":2399.95,"currency_code":"USD","in_stock":true},{"title":"With \/ Steel","offer_id":68143679832380,"sku":"RH-60546","price":2399.95,"currency_code":"USD","in_stock":true},{"title":"Without \/ Steel","offer_id":68143679865148,"sku":"RH-60549","price":2399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60502-2_2068edce-d546-4bb8-b271-5e84f8c26cf4.jpg?v=1794436509"},{"product_id":"rock-hard-4x4-muffler-skid-plate-ford-bronco-2021-2026","title":"Rock Hard 4x4 Muffler Skid Plate | Ford Bronco (2021-2026) | P\/N RH-60507","description":"\u003cp\u003eThe Muffler Skid Plate protects the exhaust muffler on the Ford Bronco 2021-2026 with 3\/16in plate steel, laser cut, CNC bent and hand welded. It works with the factory plastic or steel rear bumper and with Rock Hard 4x4 rear bumpers RH-60300, RH-60301 and RH-60340.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/16in thick plate steel\u003c\/li\u003e\n\u003cli\u003eLaser cut, CNC bent and hand welded\u003c\/li\u003e\n\u003cli\u003eSupport brackets included\u003c\/li\u003e\n\u003cli\u003eMounts away from driveline components, no added vibration or noise\u003c\/li\u003e\n\u003cli\u003eBolt-on, no welding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 3\/16in plate steel\u003c\/li\u003e\n\u003cli\u003eWeight: 42 lb\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 42 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 45 x 20 x 4 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with the Bronco Raptor.\u003c\/li\u003e\n\u003cli\u003eWorks with the factory rear bumper or Rock Hard 4x4 RH-60300, RH-60301 and RH-60340 rear bumpers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60507\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143680815420,"sku":"RH-60507","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60507-2.jpg?v=1794436520"},{"product_id":"rock-hard-4x4-aluminum-muffler-skid-plate-ford-bronco-2021-2026","title":"Rock Hard 4x4 Aluminum Muffler Skid Plate | Ford Bronco (2021-2026) | P\/N RH-60547","description":"\u003cp\u003eThe Aluminum Muffler Skid Plate protects the exhaust muffler on the Ford Bronco 2021-2026 with 1\/4in plate aluminum, laser cut, CNC bent and hand welded. It works with the factory plastic or steel rear bumper and with Rock Hard 4x4 rear bumpers RH-60300, RH-60301 and RH-60340.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick plate aluminum\u003c\/li\u003e\n\u003cli\u003eLaser cut, CNC bent and hand welded\u003c\/li\u003e\n\u003cli\u003eSupport brackets included\u003c\/li\u003e\n\u003cli\u003eMounts away from driveline components, no added vibration or noise\u003c\/li\u003e\n\u003cli\u003eBolt-on, no welding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate aluminum\u003c\/li\u003e\n\u003cli\u003eWeight: 26 lb\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 23 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 45 x 20 x 4 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with the Bronco Raptor.\u003c\/li\u003e\n\u003cli\u003eWorks with the factory rear bumper or Rock Hard 4x4 RH-60300, RH-60301 and RH-60340 rear bumpers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60547\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143681896764,"sku":"RH-60547","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60507-2_c9740f84-5313-49cf-bfe4-80a7120e6e62.jpg?v=1794436529"},{"product_id":"rock-hard-4x4-aluminum-front-lower-bash-skid-plate-for-front-bumper-ford-bronco-2021-2026","title":"Rock Hard 4x4 Aluminum Front Lower Bash Skid Plate for Front Bumper | Ford Bronco (2021-2026) | P\/N RH-60548","description":"\u003cp\u003eThe Aluminum Front Lower Bash Skid Plate covers the front underside of the Ford Bronco 2021-2026 behind a Rock Hard 4x4 front bumper. It is 1\/4in aluminum, bolt-on, and mounts away from the driveline so it adds no vibration or noise.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick aluminum\u003c\/li\u003e\n\u003cli\u003e100% bolt-on design\u003c\/li\u003e\n\u003cli\u003eTapered bolt head protecting washers\u003c\/li\u003e\n\u003cli\u003ePowder coat and all hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in aluminum\u003c\/li\u003e\n\u003cli\u003eFinish: powder coat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOnly compatible with a Rock Hard 4x4 front bumper.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60548\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143682978108,"sku":"RH-60548","price":389.95,"currency_code":"USD","in_stock":true}]},{"product_id":"rock-hard-4x4-a-pillar-windshield-light-mounts-ford-bronco-2021-2026","title":"Rock Hard 4x4 A-Pillar Windshield Light Mounts | Ford Bronco (2021-2026) | P\/N RH-60601","description":"\u003cp\u003eThese A-pillar light mounts bolt to the factory windshield frame mounts on the Ford Bronco 2021-2026 using factory holes and hardware, with no drilling. They are laser cut and sold as a pair, driver and passenger side.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMatches the factory windshield frame mount bolt pattern\u003c\/li\u003e\n\u003cli\u003eInstalls with factory holes and hardware, no drilling\u003c\/li\u003e\n\u003cli\u003eLaser cut\u003c\/li\u003e\n\u003cli\u003eFits most auxiliary lights\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eQuantity: pair (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60601\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143683699004,"sku":"RH-60601","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60601-2.jpg?v=1794436546"},{"product_id":"rock-hard-4x4-riverrack-ford-bronco-2021-2026","title":"Rock Hard 4x4 RiverRack | Ford Bronco (2021-2026) | P\/N RH-60900","description":"\u003cp\u003eThe RiverRack is a steel basket that attaches to the tailgate vent cover of the Ford Bronco 2021-2026 and holds an ice chest. It bolts on using the factory holes in the OEM vent cover, keeps the 3rd brake light and backup camera, and removes with an included slip pin.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBolt-on, uses the factory holes in the OEM vent cover\u003c\/li\u003e\n\u003cli\u003e3rd brake light and backup camera compatible\u003c\/li\u003e\n\u003cli\u003eRemoves with the included slip pin\u003c\/li\u003e\n\u003cli\u003eSecurity tabs (lock not included)\u003c\/li\u003e\n\u003cli\u003eRubber isolators to prevent rattles\u003c\/li\u003e\n\u003cli\u003ePowder coat included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTailgate to edge of basket: 19in\u003c\/li\u003e\n\u003cli\u003eSide wall length: 15in\u003c\/li\u003e\n\u003cli\u003eWidth: 26in\u003c\/li\u003e\n\u003cli\u003eMaterial: steel\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 54 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 28 x 27 x 9 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60900\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143684649276,"sku":"RH-60900","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60900-2.jpg?v=1794436555"},{"product_id":"rock-hard-4x4-aluminum-sportdeck-ford-bronco-4-door-2021-2026","title":"Rock Hard 4x4 Aluminum SportDeck | Ford Bronco 4-Door (2021-2026) | P\/N RH-60940","description":"\u003cp\u003eThe Aluminum SportDeck is a bolt-in aluminum utility shelf for the Ford Bronco 4-Door 2021-2026 that adds cargo space up high. Steel brackets mount to existing threaded nuts using factory holes in the OEM cage, with no trimming or cutting, and the deck has dozens of laser cut mounting points.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e100% bolt-in, uses factory holes in the OEM cage\u003c\/li\u003e\n\u003cli\u003eZero trimming or cutting\u003c\/li\u003e\n\u003cli\u003eDozens of laser cut mounting points\u003c\/li\u003e\n\u003cli\u003eRattle free\u003c\/li\u003e\n\u003cli\u003eInstalls with simple hand tools\u003c\/li\u003e\n\u003cli\u003ePowder coat included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDeck: 21in deep x 43in wide x 1.5in tall\u003c\/li\u003e\n\u003cli\u003eUnderside clearance: 21in\u003c\/li\u003e\n\u003cli\u003eWeight: 10 lb basket, 10 lb brackets, 20 lb total\u003c\/li\u003e\n\u003cli\u003eDeck material: aluminum\u003c\/li\u003e\n\u003cli\u003eBrackets: steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 28 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 28 x 27 x 9 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eWorks with the OEM hard top and soft top. Does not fit the Bronco Raptor.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 4-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60940\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143685763388,"sku":"RH-60940","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60940-2.jpg?v=1794436565"},{"product_id":"rock-hard-4x4-aluminum-sportdeck-ford-bronco-2-door-2021-2026","title":"Rock Hard 4x4 Aluminum SportDeck | Ford Bronco 2-Door (2021-2026) | P\/N RH-60942","description":"\u003cp\u003eThe Aluminum SportDeck is a bolt-in aluminum utility shelf for the Ford Bronco 2-Door 2021-2026 that adds cargo space up high. Steel brackets mount to existing threaded nuts using factory holes in the OEM body, with no trimming or cutting, and the deck has dozens of laser cut mounting points.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e100% bolt-in, uses factory holes in the OEM body\u003c\/li\u003e\n\u003cli\u003eZero trimming or cutting\u003c\/li\u003e\n\u003cli\u003eDozens of laser cut mounting points\u003c\/li\u003e\n\u003cli\u003eRattle free\u003c\/li\u003e\n\u003cli\u003eInstalls with simple hand tools\u003c\/li\u003e\n\u003cli\u003ePowder coat included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDeck: 14in deep x 42in wide x 1.5in tall\u003c\/li\u003e\n\u003cli\u003eUnderside clearance: 22.5in\u003c\/li\u003e\n\u003cli\u003eWeight: 10 lb basket, 10 lb brackets, 20 lb total\u003c\/li\u003e\n\u003cli\u003eDeck material: aluminum\u003c\/li\u003e\n\u003cli\u003eBrackets: steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 25 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 45 x 20 x 4 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eWorks with the OEM hard top and soft top. Does not fit the Bronco Raptor.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 2-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60942\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143686353212,"sku":"RH-60942","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60942-2.jpg?v=1794436576"},{"product_id":"rock-hard-4x4-aluminum-sportdeck-ford-bronco-raptor-2021-2026","title":"Rock Hard 4x4 Aluminum SportDeck | Ford Bronco Raptor (2021-2026) | P\/N RH-60945","description":"\u003cp\u003eThe Aluminum SportDeck is a bolt-in aluminum utility shelf for the Ford Bronco Raptor 2021-2026 that adds cargo space up high. Steel brackets mount to existing threaded nuts using factory holes in the OEM cage, with no trimming or cutting, and the deck has dozens of laser cut mounting points.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e100% bolt-in, uses factory holes in the OEM cage\u003c\/li\u003e\n\u003cli\u003eZero trimming or cutting\u003c\/li\u003e\n\u003cli\u003eDozens of laser cut mounting points\u003c\/li\u003e\n\u003cli\u003eRattle free\u003c\/li\u003e\n\u003cli\u003eInstalls with simple hand tools\u003c\/li\u003e\n\u003cli\u003ePowder coat included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDeck: 21in deep x 43in wide x 1.5in tall\u003c\/li\u003e\n\u003cli\u003eUnderside clearance: 21in\u003c\/li\u003e\n\u003cli\u003eWeight: 10 lb basket, 10 lb brackets, 20 lb total\u003c\/li\u003e\n\u003cli\u003eDeck material: aluminum\u003c\/li\u003e\n\u003cli\u003eBrackets: steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eDesigned specifically for the Bronco Raptor. Works with the OEM hard top and soft top.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco Raptor (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60945\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143686844732,"sku":"RH-60945","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60955-2.jpg?v=1794436586"},{"product_id":"rock-hard-4x4-sportdeck-ford-bronco-4-door-2021-2026","title":"Rock Hard 4x4 SportDeck | Ford Bronco 4-Door (2021-2026) | P\/N RH-60950","description":"\u003cp\u003eThe SportDeck is a bolt-in steel utility shelf for the Ford Bronco 4-Door 2021-2026 that adds cargo space up high. Steel brackets mount to existing threaded nuts using factory holes in the OEM cage, with no trimming or cutting, and the deck has dozens of laser cut mounting points.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e100% bolt-in, uses factory holes in the OEM cage\u003c\/li\u003e\n\u003cli\u003eZero trimming or cutting\u003c\/li\u003e\n\u003cli\u003eDozens of laser cut mounting points\u003c\/li\u003e\n\u003cli\u003eRattle free\u003c\/li\u003e\n\u003cli\u003eInstalls with simple hand tools\u003c\/li\u003e\n\u003cli\u003ePowder coat included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDeck: 21in deep x 43in wide x 1.5in tall\u003c\/li\u003e\n\u003cli\u003eUnderside clearance: 21in\u003c\/li\u003e\n\u003cli\u003eWeight: 20 lb basket, 10 lb brackets, 30 lb total\u003c\/li\u003e\n\u003cli\u003eDeck material: steel\u003c\/li\u003e\n\u003cli\u003eBrackets: steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 32 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 28 x 27 x 9 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eWorks with the OEM hard top and soft top. Does not fit the Bronco Raptor.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 4-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60950\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143687303484,"sku":"RH-60950","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60940-2_d3dca0e2-442c-4249-98a7-f4c0bbeafe89.jpg?v=1794436595"},{"product_id":"rock-hard-4x4-sportdeck-ford-bronco-2-door-2021-2026","title":"Rock Hard 4x4 SportDeck | Ford Bronco 2-Door (2021-2026) | P\/N RH-60952","description":"\u003cp\u003eThe SportDeck is a bolt-in steel utility shelf for the Ford Bronco 2-Door 2021-2026 that adds cargo space up high. Steel brackets mount to existing threaded nuts using factory holes in the OEM body, with no trimming or cutting, and the deck has dozens of laser cut mounting points.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e100% bolt-in, uses factory holes in the OEM body\u003c\/li\u003e\n\u003cli\u003eZero trimming or cutting\u003c\/li\u003e\n\u003cli\u003eDozens of laser cut mounting points\u003c\/li\u003e\n\u003cli\u003eRattle free\u003c\/li\u003e\n\u003cli\u003eInstalls with simple hand tools\u003c\/li\u003e\n\u003cli\u003ePowder coat included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDeck: 14in deep x 42in wide x 1.5in tall\u003c\/li\u003e\n\u003cli\u003eUnderside clearance: 22.5in\u003c\/li\u003e\n\u003cli\u003eWeight: 20 lb basket, 10 lb brackets, 30 lb total\u003c\/li\u003e\n\u003cli\u003eDeck material: steel\u003c\/li\u003e\n\u003cli\u003eBrackets: steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eWorks with the OEM hard top. Does not fit the Bronco Raptor.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco 2-Door (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60952\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143687762236,"sku":"RH-60952","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60942-2_01492451-a871-4223-a0c6-de9eb82a5146.jpg?v=1794436604"},{"product_id":"rock-hard-4x4-sportdeck-ford-bronco-raptor-2021-2026","title":"Rock Hard 4x4 SportDeck | Ford Bronco Raptor (2021-2026) | P\/N RH-60955","description":"\u003cp\u003eThe SportDeck is a bolt-in steel utility shelf for the Ford Bronco Raptor 2021-2026 that adds cargo space up high. Steel brackets mount to existing threaded nuts using factory holes in the OEM cage, with no trimming or cutting, and the deck has dozens of laser cut mounting points.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e100% bolt-in, uses factory holes in the OEM cage\u003c\/li\u003e\n\u003cli\u003eZero trimming or cutting\u003c\/li\u003e\n\u003cli\u003eDozens of laser cut mounting points\u003c\/li\u003e\n\u003cli\u003eRattle free\u003c\/li\u003e\n\u003cli\u003eInstalls with simple hand tools\u003c\/li\u003e\n\u003cli\u003ePowder coat included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDeck: 21in deep x 43in wide x 1.5in tall\u003c\/li\u003e\n\u003cli\u003eUnderside clearance: 21in\u003c\/li\u003e\n\u003cli\u003eWeight: 20 lb basket, 10 lb brackets, 30 lb total\u003c\/li\u003e\n\u003cli\u003eDeck material: steel\u003c\/li\u003e\n\u003cli\u003eBrackets: steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eDesigned specifically for the Bronco Raptor. Works with the OEM hard top and soft top.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco Raptor (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-60955\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143688384828,"sku":"RH-60955","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-60955-2_89da9768-e02a-40d4-88a0-7bb3729b3a6f.jpg?v=1794436614"},{"product_id":"rock-hard-4x4-patriot-series-rear-bumper-ford-bronco-1966-1977","title":"Rock Hard 4x4 Patriot Series Rear Bumper | Ford Bronco (1966-1977) | P\/N RH-6100","description":"\u003cp\u003eThe Patriot Series Rear Bumper for the Ford Bronco 1966-1977 is 1\/4in thick plate steel and runs full width to protect the corner panels and tailgate. End plates are shaped for departure angle and clearance on tight, off camber turns. It installs bolt-on with no welding.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick plate steel\u003c\/li\u003e\n\u003cli\u003eFull width, covers corner panels and tailgate\u003c\/li\u003e\n\u003cli\u003eHigh clearance end plates for departure angle\u003c\/li\u003e\n\u003cli\u003eBolt-on, no welding\u003c\/li\u003e\n\u003cli\u003ePowder coat included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss (raw on request)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 55 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 77 x 16 x 11 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (1966-1977)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-6100\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143689466172,"sku":"RH-6100","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-6100-2.jpg?v=1794436624"},{"product_id":"rock-hard-4x4-patriot-series-rear-bumper-with-tire-carrier-ford-bronco-1966-1977","title":"Rock Hard 4x4 Patriot Series Rear Bumper with Tire Carrier | Ford Bronco (1966-1977) | P\/N RH-6101","description":"\u003cp\u003eThe Patriot Series Rear Bumper with Tire Carrier for the Ford Bronco 1966-1977 is 3\/16in plate steel with an integrated swing-out tire carrier rated for a 37in spare. The carrier rides on a dual bearing and race hub and closes with a dual-stage latch and preload design that limits vibration. It installs bolt-on with no welding.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/16in plate steel\u003c\/li\u003e\n\u003cli\u003eIntegrated tire carrier holds a spare up to 37in, adjustable up and down, in and out\u003c\/li\u003e\n\u003cli\u003eDual bearing and race hub with zerk grease fitting\u003c\/li\u003e\n\u003cli\u003eDual-stage latch with preload design, one-finger operation\u003c\/li\u003e\n\u003cli\u003eSafety pin keeps the carrier from closing when parked on an angle\u003c\/li\u003e\n\u003cli\u003eIntegrated 2in receiver hitch\u003c\/li\u003e\n\u003cli\u003eIntegrated Hi-Lift jack mount and CB antenna mounts\u003c\/li\u003e\n\u003cli\u003eRecovery shackle tabs welded through the bumper face and back\u003c\/li\u003e\n\u003cli\u003eFull width with high clearance end plates\u003c\/li\u003e\n\u003cli\u003eBolt-on, no welding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 3\/16in plate steel\u003c\/li\u003e\n\u003cli\u003eSpare tire capacity: 37in\u003c\/li\u003e\n\u003cli\u003eReceiver: 2in\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss (raw on request)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 178 lb\u003c\/li\u003e\n\u003cli\u003eShipping size on pallet: 80 x 36 x 21 in\u003c\/li\u003e\n\u003cli\u003eShips by truck freight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eGrease the hub through the zerk fitting after water crossings or rain.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (1966-1977)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-6101\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143690875196,"sku":"RH-6101","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-6101-2.jpg?v=1794436635"},{"product_id":"rock-hard-4x4-freedom-series-front-bumper-ford-bronco-1966-1977","title":"Rock Hard 4x4 Freedom Series Front Bumper | Ford Bronco (1966-1977) | P\/N RH-6200","description":"\u003cp\u003eThe Freedom Series Front Bumper for the Ford Bronco 1966-1977 is laser cut from 1\/4in steel, bent, hand welded and powder coated. It is winch ready with an included 1\/4in laser cut fairlead mounting plate, has recovery tabs, and bolts to the existing frame mounting points. Add the Shorty Winch Guard (RH-6201) or Stinger Hoop (RH-6202) later.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/4in thick steel, laser cut and hand welded\u003c\/li\u003e\n\u003cli\u003eWinch ready with 1\/4in laser cut, CNC bent fairlead mounting plate\u003c\/li\u003e\n\u003cli\u003eFits WARN ZEON and PowerPlant winches\u003c\/li\u003e\n\u003cli\u003eRecovery tabs included\u003c\/li\u003e\n\u003cli\u003eFlat towable with bolt-on tow bar brackets (sold separately)\u003c\/li\u003e\n\u003cli\u003eBolts to existing frame mounting points, all hardware included\u003c\/li\u003e\n\u003cli\u003ePowder coated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss (raw on request)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 100 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 67 x 16 x 10 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOptional Shorty Winch Guard with Light Mounting Tabs RH-6201 and Stinger Hoop RH-6202.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (1966-1977)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-6200\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143691399484,"sku":"RH-6200","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-6200-2.jpg?v=1794436645"},{"product_id":"rock-hard-4x4-shorty-winch-guard-with-light-mounting-tabs-for-rh-6200-front-bumper-ford-bronco-1966-1977","title":"Rock Hard 4x4 Shorty Winch Guard with Light Mounting Tabs for RH-6200 Front Bumper | Ford Bronco (1966-1977) | P\/N RH-6201","description":"\u003cp\u003eThe Shorty Winch Guard bolts onto the Rock Hard 4x4 RH-6200 Freedom Series Front Bumper on the Ford Bronco 1966-1977 using the bumper hardware. Pre-welded tabs are spaced for a 10in LED bar or individual light pods.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBolt-on upgrade for the RH-6200 front bumper\u003c\/li\u003e\n\u003cli\u003eMounts with the front bumper hardware\u003c\/li\u003e\n\u003cli\u003ePre-welded light mounting tabs spaced for 10in LED bars or light pods\u003c\/li\u003e\n\u003cli\u003e1\/4in thick plate steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4in plate steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss (raw on request)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 15 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 38 x 17 x 7 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRequires the Rock Hard 4x4 RH-6200 front bumper.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (1966-1977)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-6201\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143691858236,"sku":"RH-6201","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-6201-2.jpg?v=1794436654"},{"product_id":"rock-hard-4x4-stinger-hoop-for-rh-6200-front-bumper-ford-bronco-1966-1977","title":"Rock Hard 4x4 Stinger Hoop for RH-6200 Front Bumper | Ford Bronco (1966-1977) | P\/N RH-6202","description":"\u003cp\u003eThe Stinger Hoop adds a flat-nose stinger to the Rock Hard 4x4 RH-6200 Freedom Series Front Bumper on the Ford Bronco 1966-1977. The flat nose is designed to act as a brake in a forward roll rather than push the vehicle onto its side. It uses the top bumper mounting hardware plus 4 additional holes drilled in the front.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFlat-nose stinger design\u003c\/li\u003e\n\u003cli\u003e1\/4in thick plate steel gussets\u003c\/li\u003e\n\u003cli\u003eUses the top bumper mounting hardware\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGussets: 1\/4in plate steel\u003c\/li\u003e\n\u003cli\u003eFinish: black powder coat, semi-smooth semi-gloss (raw on request)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eShipping weight: 25 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 37 x 31 x 10 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRequires the Rock Hard 4x4 RH-6200 front bumper.\u003c\/li\u003e\n\u003cli\u003eDrilling required: 4 additional holes in the front of the bumper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (1966-1977)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-6202\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143692349756,"sku":"RH-6202","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-6202-2.jpg?v=1794436665"},{"product_id":"rock-hard-4x4-bolt-in-ultimate-sport-cage-jeep-cj5-1976-1978","title":"Rock Hard 4x4 Bolt-In Ultimate Sport Cage | Jeep CJ5 (1976-1978) | P\/N RH-1006","description":"\u003cp\u003eThe Rock Hard 4x4 Bolt-In Ultimate Sport Cage for the Jeep CJ5 1976-1978 covers the cabin from the factory sport bar forward to the dash. It bolts in with the factory cage left in place, so there is no drilling and no welding. It fits soft tops and hard tops and ships unpainted with all hardware.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMain cage section from the factory sport bar forward to the dash\u003c\/li\u003e\n\u003cli\u003eIncludes the top T-section, windshield side bars with grab handles and the bar across the dash\u003c\/li\u003e\n\u003cli\u003eDash brackets mount with 3 bolts at the triangle plate and 3 bolts down the door post on each side\u003c\/li\u003e\n\u003cli\u003eThe factory sport cage stays in place\u003c\/li\u003e\n\u003cli\u003eNo drilling and no welding\u003c\/li\u003e\n\u003cli\u003eFits soft tops and hard tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: unpainted\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-in, all hardware included\u003c\/li\u003e\n\u003cli\u003eShipping weight: 81 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 58 x 37 x 5 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTest fit every part before powder coating or painting.\u003c\/li\u003e\n\u003cli\u003eNot compatible with CJ5 factory cages that have a hoop with no angle and 45-degree bars welded to the top of the hoop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep CJ5 (1976-1978)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1006\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143692775740,"sku":"RH-1006","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1006-2.jpg?v=1794436675"},{"product_id":"rock-hard-4x4-bolt-in-ultimate-sport-cage-jeep-cj7-1976-1978","title":"Rock Hard 4x4 Bolt-In Ultimate Sport Cage | Jeep CJ7 (1976-1978) | P\/N RH-1007","description":"\u003cp\u003eThe Rock Hard 4x4 Bolt-In Ultimate Sport Cage for the Jeep CJ7 1976-1978 covers the cabin from the factory sport bar forward to the dash. It bolts in with the factory cage left in place, so there is no drilling and no welding. It fits soft tops and hard tops and ships unpainted with all hardware.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMain cage section from the factory sport bar forward to the dash\u003c\/li\u003e\n\u003cli\u003eIncludes the top T-section, windshield side bars with grab handles and the bar across the dash\u003c\/li\u003e\n\u003cli\u003eDash brackets mount with 3 bolts at the triangle plate and 3 bolts down the door post on each side\u003c\/li\u003e\n\u003cli\u003eThe factory sport cage stays in place\u003c\/li\u003e\n\u003cli\u003eNo drilling and no welding\u003c\/li\u003e\n\u003cli\u003eFits soft tops and hard tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: unpainted\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-in, all hardware included\u003c\/li\u003e\n\u003cli\u003eShipping weight: 81 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 58 x 37 x 5 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTest fit every part before powder coating or painting.\u003c\/li\u003e\n\u003cli\u003eTwo dash pad styles exist on the CJ7. The style that tapers narrower over the last 3in on each side needs no trimming; the style that keeps the same width across the dash needs minor trimming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep CJ7 (1976-1978)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1007\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143694053692,"sku":"RH-1007","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1007-2.jpg?v=1794436687"},{"product_id":"rock-hard-4x4-bolt-in-ultimate-sport-cage-jeep-cj5-1979-1983","title":"Rock Hard 4x4 Bolt-In Ultimate Sport Cage | Jeep CJ5 (1979-1983) | P\/N RH-1008","description":"\u003cp\u003eThe Rock Hard 4x4 Bolt-In Ultimate Sport Cage for the Jeep CJ5 1979-1983 covers the cabin from the factory sport bar forward to the dash. It bolts in with the factory cage left in place, so there is no drilling and no welding. It fits soft tops and hard tops and ships unpainted with all hardware.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMain cage section from the factory sport bar forward to the dash\u003c\/li\u003e\n\u003cli\u003eIncludes the top T-section, windshield side bars with grab handles and the bar across the dash\u003c\/li\u003e\n\u003cli\u003eDash brackets mount with 3 bolts at the triangle plate and 3 bolts down the door post on each side\u003c\/li\u003e\n\u003cli\u003eThe factory sport cage stays in place\u003c\/li\u003e\n\u003cli\u003eNo drilling and no welding\u003c\/li\u003e\n\u003cli\u003eFits soft tops and hard tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: unpainted\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-in, all hardware included\u003c\/li\u003e\n\u003cli\u003eShipping weight: 81 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 58 x 37 x 5 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eTest fit every part before powder coating or painting.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep CJ5 (1979-1983)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1008\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143694545212,"sku":"RH-1008","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1008-2.jpg?v=1794436703"},{"product_id":"rock-hard-4x4-replacement-factory-style-hoop-and-supports-jeep-cj5-1955-1975","title":"Rock Hard 4x4 Replacement Factory Style Hoop and Supports | Jeep CJ5 (1955-1975) | P\/N RH-1010","description":"\u003cp\u003eThis Rock Hard 4x4 replacement factory style hoop and supports is the sport bar for the Jeep CJ5 1955-1975. The RH-1010-A Ultimate Sport Cage mounts to this hoop and cannot be installed on the OEM roll bar. It bolts in with no drilling or welding and fits under soft tops.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFactory style sport bar hoop with supports\u003c\/li\u003e\n\u003cli\u003eBase for the RH-1010-A Bolt-In Ultimate Sport Cage\u003c\/li\u003e\n\u003cli\u003eNo drilling and no welding\u003c\/li\u003e\n\u003cli\u003eFits under soft tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: unpainted\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-in, all hardware included\u003c\/li\u003e\n\u003cli\u003eShipping weight: 70 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 54 x 36 x 3 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTest fit every part before powder coating or painting.\u003c\/li\u003e\n\u003cli\u003eRequired to install the RH-1010-A cage. The RH-1010-A cage does not fit the OEM roll bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep CJ5 (1955-1975)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1010\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143696806204,"sku":"RH-1010","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1010-2.jpg?v=1794436796"},{"product_id":"rock-hard-4x4-bolt-in-ultimate-sport-cage-jeep-cj5-1955-1975","title":"Rock Hard 4x4 Bolt-In Ultimate Sport Cage | Jeep CJ5 (1955-1975) | P\/N RH-1010-A","description":"\u003cp\u003eThe Rock Hard 4x4 Bolt-In Ultimate Sport Cage for the Jeep CJ5 1955-1975 mounts to the RH-1010 replacement factory style hoop. It cannot be installed on the OEM roll bar. It bolts in with no drilling or welding, fits under soft tops and ships unpainted with all hardware.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMain cage for the early CJ5\u003c\/li\u003e\n\u003cli\u003eMounts to the RH-1010 replacement factory style hoop\u003c\/li\u003e\n\u003cli\u003eNo drilling and no welding\u003c\/li\u003e\n\u003cli\u003eFits under soft tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: unpainted\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-in, all hardware included\u003c\/li\u003e\n\u003cli\u003eShipping weight: 81 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 58 x 37 x 5 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTest fit every part before powder coating or painting.\u003c\/li\u003e\n\u003cli\u003eRequires RH-1010. Not for the OEM roll bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep CJ5 (1955-1975)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1010-A\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143697297724,"sku":"RH-1010-A","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1010-A-2.jpg?v=1794436809"},{"product_id":"rock-hard-4x4-bolt-in-ultimate-sport-cage-pickup-cab-jeep-cj8-scrambler-1981-1986","title":"Rock Hard 4x4 Bolt-In Ultimate Sport Cage | Pickup Cab | Jeep CJ8 Scrambler (1981-1986) | P\/N RH-1005","description":"\u003cp\u003eThe Rock Hard 4x4 Bolt-In Ultimate Sport Cage for the Jeep CJ8 Scrambler 1981-1986 pickup cab includes a rear hoop that fastens to the factory bar through the same hole in the hard top as the shoulder belt mounts. It bolts in with the factory cage left in place, with no drilling or welding. It fits half cab and full hard tops and soft tops.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIncludes a rear hoop that fastens to the factory bar at the shoulder belt mount hole\u003c\/li\u003e\n\u003cli\u003eIncludes the top T-section, windshield side bars with grab handles and the bar across the dash\u003c\/li\u003e\n\u003cli\u003eThe factory sport cage stays in place\u003c\/li\u003e\n\u003cli\u003eNo drilling and no welding\u003c\/li\u003e\n\u003cli\u003eFits half cab, full hard top and soft top\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: unpainted\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 172 lb\u003c\/li\u003e\n\u003cli\u003eShipping size on pallet: 58 x 48 x 17 in\u003c\/li\u003e\n\u003cli\u003eShips by truck freight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTest fit every part before powder coating or painting.\u003c\/li\u003e\n\u003cli\u003eFor a full hard top or soft top without the rear hoop, see RH-1005-B.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep CJ8 Scrambler (1981-1986)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1005\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143697756476,"sku":"RH-1005","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1005-2.jpg?v=1794436819"},{"product_id":"rock-hard-4x4-bolt-in-ultimate-sport-cage-soft-and-hard-top-jeep-cj8-scrambler-1981-1986","title":"Rock Hard 4x4 Bolt-In Ultimate Sport Cage | Soft and Hard Top | Jeep CJ8 Scrambler (1981-1986) | P\/N RH-1005-B","description":"\u003cp\u003eThis Rock Hard 4x4 Ultimate Sport Cage for the Jeep CJ8 Scrambler 1981-1986 is the main cage section for full hard tops and soft tops. It attaches to the factory hoop behind the front seats with 4 welds and does not include the Rock Hard 4x4 cage hoop that bolts behind the front seats.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMain cage section for full hard top and soft top Scramblers\u003c\/li\u003e\n\u003cli\u003eIncludes the top T-section, windshield side bars with grab handles and the bar across the dash\u003c\/li\u003e\n\u003cli\u003eAttaches to the factory hoop behind the front seats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: unpainted\u003c\/li\u003e\n\u003cli\u003eInstallation: 4 welds to the factory hoop\u003c\/li\u003e\n\u003cli\u003eShipping weight: 81 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 58 x 37 x 5 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTest fit every part before powder coating or painting.\u003c\/li\u003e\n\u003cli\u003eDoes not include the cage hoop that bolts behind the front seats.\u003c\/li\u003e\n\u003cli\u003eFor a half cab, see RH-1005.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep CJ8 Scrambler (1981-1986)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1005-B\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143698149692,"sku":"RH-1005-B","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1005-B-2.jpg?v=1794436830"},{"product_id":"rock-hard-4x4-bolt-in-rear-sport-cage-jeep-cj8-scrambler-1981-1986","title":"Rock Hard 4x4 Bolt-In Rear Sport Cage | Jeep CJ8 Scrambler (1981-1986) | P\/N RH-1005-A","description":"\u003cp\u003eThe Rock Hard 4x4 Bolt-In Rear Sport Cage covers the rear of the Jeep CJ8 Scrambler 1981-1986 cabin. It includes a rear hoop and 4 overhead bars and requires the factory hoop. It ships unpainted.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRear hoop\u003c\/li\u003e\n\u003cli\u003e4 overhead bars\u003c\/li\u003e\n\u003cli\u003eWorks with the factory hoop\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFinish: unpainted\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 152 lb\u003c\/li\u003e\n\u003cli\u003eShipping size on pallet: 58 x 50 x 10 in\u003c\/li\u003e\n\u003cli\u003eShips by truck freight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTest fit every part before powder coating or painting.\u003c\/li\u003e\n\u003cli\u003eFactory hoop required.\u003c\/li\u003e\n\u003cli\u003eSome factory 45-degree bars have welded-on tabs that may need to be ground off for the rear hoop to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep CJ8 Scrambler (1981-1986)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN RH-1005-A\u003c\/li\u003e\u003c\/ul\u003e","brand":"Rock Hard 4x4","offers":[{"title":"Default Title","offer_id":68143698608444,"sku":"RH-1005-A","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/RH-1005-A-2.jpg?v=1794436840"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/collections\/cHBKPIoq3GbuTuJI.png?v=1794430178","url":"https:\/\/highliftoffroad.com\/collections\/rock-hard-4x4.oembed?page=9","provider":"HighLift Off-Road","version":"1.0","type":"link"}