{"title":"MetalCloak","description":"\u003cp\u003eMetalCloak designs and builds Jeep suspension and armor. Its parts are drawn in CAD, cut and machined on CNC equipment and made to work together as a system: Duroflex control arms, True Dual Rate coils, RockSport and 6Pak shocks, Durotrak track bars and the brackets that tie them together.\u003c\/p\u003e\u003cp\u003eThe line covers the Jeep Wrangler JL, JK, TJ, LJ and YJ, the Gladiator JT and older CJ and XJ models, with a growing range for the Ford Bronco, Toyota Tacoma, Ram heavy duty trucks and INEOS Grenadier. It includes adjustable upper and lower control arms with Duroflex joints, front and rear True Dual Rate coil sets for 2.5in to 5.5in of lift, long travel shocks, adjustable and solid chromoly track bars, sway bar links and quick disconnects, adjustable bump stops, steering stabilizers, tie rods, drag links and Baller Joints ball joints.\u003c\/p\u003e\u003cp\u003eFront coil kits for the JL and JT come with upper isolators for a specific engine, so each kit is listed with a Motor choice: JL with eTorque or JT 3.6L, JL without eTorque, diesel and 4xE, and JT Mojave. Pick the one that matches your Jeep. Rear JL kits have a 4xE option that adds the 4xE isolators. Match the door count and lift height in the title, since the same coil gives a different lift on a 2-door and a 4-door.\u003c\/p\u003e\u003cp\u003eNot sure it fits? Call 513 285-4000 or email customerservice@highliftoffroad.com and we'll check it.\u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/control-arms\"\u003eControl Arms\u003c\/a\u003e | \u003ca href=\"\/collections\/shocks\"\u003eShocks\u003c\/a\u003e | \u003ca href=\"\/collections\/track-bars\"\u003eTrack Bars\u003c\/a\u003e | \u003ca href=\"\/collections\/steering-stabilizers\"\u003eSteering Stabilizers\u003c\/a\u003e | \u003ca href=\"\/collections\/rock-sliders-rocker-guards\"\u003eRock Sliders \u0026amp; Rocker Guards\u003c\/a\u003e | \u003ca href=\"\/collections\/skid-plates\"\u003eSkid Plates\u003c\/a\u003e | \u003ca href=\"\/collections\/front-bumper\"\u003eFront Bumpers\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"metalcloak-rear-differential-lock-wire-extension-bracket-toyota-tacoma-4g","title":"MetalCloak Rear Differential Lock Wire Extension Bracket | Toyota Tacoma 4G | P\/N 7818","description":"\u003cp\u003eThis bracket relocates the factory rear differential lock wiring mount on a lifted Toyota Tacoma 4G. Moving the mount gives the existing wiring more slack and support, which reduces tension on the wire as the rear suspension travels and articulates.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRelocates the factory rear differential lock wiring mount\u003c\/li\u003e\n\u003cli\u003eAdds slack to the existing wiring to reduce strain during articulation\u003c\/li\u003e\n\u003cli\u003eBolt-on design that uses factory mounting locations\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/8in hot rolled steel\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-on\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eIntended for Tacoma trucks with a suspension lift.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 7818\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145273110844,"sku":"7818","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/7818-new-with-logo.jpg?v=1794460847"},{"product_id":"metalcloak-baller-joints-hd-ball-joint-set-upper-and-lower-jeep-wrangler-jl-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak Baller Joints HD Ball Joint Set | Upper and Lower | Jeep Wrangler JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N 1911","description":"\u003cp\u003eBaller Joints HD replace the front upper and lower ball joints on the Jeep Wrangler JL and Gladiator JT. Preload on the upper joint shares the force between the upper and lower joints, and both joints can be greased, adjusted and rebuilt with the knuckle on the Jeep.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUpper and lower load-bearing joints\u003c\/li\u003e\n\u003cli\u003eInduction-hardened chromoly spindle and ball\u003c\/li\u003e\n\u003cli\u003eS-7 tool steel concave bearing races\u003c\/li\u003e\n\u003cli\u003eComposite bushing rated at 23,000 lbs or more per bushing, upper and lower\u003c\/li\u003e\n\u003cli\u003eCaptured design: press-in joint secured by an aluminum lock nut and thread-on top cap\u003c\/li\u003e\n\u003cli\u003eBuna-N O-rings and shaft wiper seals\u003c\/li\u003e\n\u003cli\u003eRecessed zerk fittings for greasing\u003c\/li\u003e\n\u003cli\u003eAdjustable preload\u003c\/li\u003e\n\u003cli\u003eRebuildable on the Jeep without a press\u003c\/li\u003e\n\u003cli\u003eCustom laser-cut lock ring wrench included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUpper joint cap: 6061 aluminum hex\u003c\/li\u003e\n\u003cli\u003eUpper joint spindle: chromoly steel\u003c\/li\u003e\n\u003cli\u003eUpper joint housing: 1045 steel\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc, clear zinc and black anodized\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: moderate\u003c\/li\u003e\n\u003cli\u003eBody modification: none\u003c\/li\u003e\n\u003cli\u003eInstall time: 4 to 5 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUpper ball joints\u003c\/li\u003e\n\u003cli\u003eLower ball joints\u003c\/li\u003e\n\u003cli\u003eLock ring wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRebuild kits for the JL and JT are sold separately.\u003c\/li\u003e\n\u003cli\u003eA Baller Joint custom wrench (P\/N 1999) is sold separately.\u003c\/li\u003e\n\u003cli\u003eA suspension specialist alignment is recommended after MetalCloak suspension parts are installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1911 · UPC 810191170617\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145273372988,"sku":"1911","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/hfeoh4afrhrm7cxxtduj.jpg?v=1794460937"},{"product_id":"metalcloak-undercloak-muffler-skid-plate-2-door-and-4-door-ford-bronco-2021-2026","title":"MetalCloak UnderCloak Muffler Skid Plate | 2-Door and 4-Door | Ford Bronco (2021-2026) | P\/N B0401","description":"\u003cp\u003eThe UnderCloak Muffler Skid Plate protects the muffler on the 2021-2026 Ford Bronco 2-Door and 4-Door, with or without the Sasquatch package. The 3\/16in steel plate and hanger brackets bolt into factory locations with no body modification.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eProtects the Bronco muffler\u003c\/li\u003e\n\u003cli\u003eFits 2-Door and 4-Door models, Sasquatch and non-Sasquatch\u003c\/li\u003e\n\u003cli\u003eUpturned edges for approach and departure clearance to help prevent snagging\u003c\/li\u003e\n\u003cli\u003eBolts into factory locations\u003c\/li\u003e\n\u003cli\u003eCAD designed, CNC formed and laser cut\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSkid plate: 3\/16in hot rolled steel\u003c\/li\u003e\n\u003cli\u003eHanger brackets: 3\/16in hot rolled steel\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc\u003c\/li\u003e\n\u003cli\u003eWeight: 56 lbs\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eBody modification: none\u003c\/li\u003e\n\u003cli\u003eInstall time: about 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMuffler skid plate\u003c\/li\u003e\n\u003cli\u003eSkid plate brackets\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eDoes not fit the Bronco Sport.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN B0401\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145273536828,"sku":"B0401","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/b0401-with-logo.jpg?v=1794460862"},{"product_id":"metalcloak-true-dual-rate-front-coil-springs-jl-5-5in-jt-4-5in-lift-jeep-wrangler-jl-4-door-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak True Dual Rate Front Coil Springs | JL 5.5in, JT 4.5in Lift | Jeep Wrangler JL 4-Door (2018-2026)\/Gladiator JT (2020-2026) | P\/N 7675","description":"\u003cp\u003eTrue Dual Rate front coils lift the 2018-2026 Jeep Wrangler JL 4-Door 5.5in and the 2020-2026 Gladiator JT 4.5in. The long free length keeps the coils seated at full droop while the dual rate design holds ride height under load. Choose the Motor option that matches your Jeep: each kit includes the upper coil isolators for that engine.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5.5in front lift on the JL 4-Door, 4.5in on the JT Gladiator\u003c\/li\u003e\n\u003cli\u003eOne of the longest free lengths in the industry\u003c\/li\u003e\n\u003cli\u003eStays in the coil buckets at full droop\u003c\/li\u003e\n\u003cli\u003eCreates a virtual coil bucket that helps stabilize the spring and reduce buckling\u003c\/li\u003e\n\u003cli\u003eConsistent ride height and resists sagging\u003c\/li\u003e\n\u003cli\u003eLower front coil correction pads replace the OEM plastic parts and correct coil bow from worn factory parts\u003c\/li\u003e\n\u003cli\u003eMotor-specific thermoset elastomer upper coil isolators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eMaterial: high-tensile chrome-silicon steel\u003c\/li\u003e\n\u003cli\u003eFree length: 24.5in\u003c\/li\u003e\n\u003cli\u003eSolid height: 9in\u003c\/li\u003e\n\u003cli\u003eIsolators: thermoset elastomer upper, polyurethane lower\u003c\/li\u003e\n\u003cli\u003eCoating: black powder coat\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 to 2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTrue Dual Rate front coils (2)\u003c\/li\u003e\n\u003cli\u003eLower front coil correction pads (2)\u003c\/li\u003e\n\u003cli\u003eMotor-specific upper coil isolators (2)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNot for the JL 2-Door.\u003c\/li\u003e\n\u003cli\u003eEngineered to work with Duroflex control arms and 6Pak or RockSport shocks, sold separately.\u003c\/li\u003e\n\u003cli\u003eDo not powder coat these coils. The baking process can alter the steel and reduce lift height, and powder coating voids the coil warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional alignment recommended after installation.\u003c\/li\u003e\n\u003cli\u003eDual Rate Coil Sleeves for the front, set of four, are sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL 4-Door (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN 7675-7249 - JL With E-Torque \/ JT 3.6L\u003c\/li\u003e\n\u003cli\u003eMPN 7675-7255 - Diesel JL\/JT\u003c\/li\u003e\n\u003cli\u003eMPN 7675-7259 - JL 4xE\u003c\/li\u003e\n\u003cli\u003eMPN 7675-7669 - JL Without E-Torque\u003c\/li\u003e\n\u003cli\u003eMPN 7675-7692 - JT Mojave\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"JL With E-Torque \/ JT 3.6L","offer_id":68145273798972,"sku":"7675-7249","price":331.0,"currency_code":"USD","in_stock":true},{"title":"Diesel JL\/JT","offer_id":68145273831740,"sku":"7675-7255","price":336.0,"currency_code":"USD","in_stock":true},{"title":"JL 4xE","offer_id":68145273864508,"sku":"7675-7259","price":366.0,"currency_code":"USD","in_stock":true},{"title":"JL Without E-Torque","offer_id":68145273897276,"sku":"7675-7669","price":356.0,"currency_code":"USD","in_stock":true},{"title":"JT Mojave","offer_id":68145273930044,"sku":"7675-7692","price":323.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/7675-turbo-with-logo.jpg?v=1794460872"},{"product_id":"metalcloak-true-dual-rate-front-coils-jt-3-5in-jl-4-door-4-5in-jl-2-door-5-5in-jeep-wrangler-jl-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak True Dual Rate Front Coils | JT 3.5in, JL 4-Door 4.5in, JL 2-Door 5.5in | Jeep Wrangler JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N 7671","description":"\u003cp\u003eTrue Dual Rate front coils lift the 2018-2026 Jeep Wrangler JL and 2020-2026 Gladiator JT: Lift: 3.5in on JT Gladiator, 4.5in on JL 4-Door, 5.5in on JL 2-Door. The long free length keeps the coils seated at full droop while the dual rate design holds ride height under load. Choose the Motor option that matches your Jeep: each kit includes the upper coil isolators for that engine.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLift: 3.5in on JT Gladiator, 4.5in on JL 4-Door, 5.5in on JL 2-Door\u003c\/li\u003e\n\u003cli\u003eOne of the longest free lengths in the industry\u003c\/li\u003e\n\u003cli\u003eStays in the coil buckets at full droop\u003c\/li\u003e\n\u003cli\u003eCreates a virtual coil bucket that helps stabilize the spring and reduce buckling\u003c\/li\u003e\n\u003cli\u003eConsistent ride height and resists sagging\u003c\/li\u003e\n\u003cli\u003eLower front coil correction pads replace the OEM plastic parts and correct coil bow from worn factory parts\u003c\/li\u003e\n\u003cli\u003eMotor-specific thermoset elastomer upper coil isolators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eMaterial: high-tensile chrome-silicon steel\u003c\/li\u003e\n\u003cli\u003eFree length: 23.5in\u003c\/li\u003e\n\u003cli\u003eSolid height: 8.7in\u003c\/li\u003e\n\u003cli\u003eIsolators: thermoset elastomer upper, Shore 90A polyurethane lower\u003c\/li\u003e\n\u003cli\u003eCoating: black powder coat\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 to 2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTrue Dual Rate front coils (2)\u003c\/li\u003e\n\u003cli\u003eLower front coil correction pads\u003c\/li\u003e\n\u003cli\u003eMotor-specific upper coil isolators\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEngineered to work with Duroflex control arms and 6Pak or RockSport shocks, sold separately.\u003c\/li\u003e\n\u003cli\u003eDo not powder coat these coils. The baking process can alter the steel and reduce lift height, and powder coating voids the coil warranty.\u003c\/li\u003e\n\u003cli\u003eProfessional alignment recommended after installation.\u003c\/li\u003e\n\u003cli\u003eDual Rate Coil Sleeves for the front, set of four, are sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN 7671-7249 - JL With E-Torque \/ JT 3.6L\u003c\/li\u003e\n\u003cli\u003eMPN 7671-7669 - JL Without E-Torque\u003c\/li\u003e\n\u003cli\u003eMPN 7671-7255 - Diesel JL\/JT AND 4xE\u003c\/li\u003e\n\u003cli\u003eMPN 7671-7692 - JT Mojave\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"JL With E-Torque \/ JT 3.6L","offer_id":68145274257724,"sku":"7671-7249","price":331.0,"currency_code":"USD","in_stock":true},{"title":"JL Without E-Torque","offer_id":68145274290492,"sku":"7671-7669","price":356.0,"currency_code":"USD","in_stock":true},{"title":"Diesel JL\/JT AND 4xE","offer_id":68145274323260,"sku":"7671-7255","price":336.0,"currency_code":"USD","in_stock":true},{"title":"JT Mojave","offer_id":68145274356028,"sku":"7671-7692","price":323.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/coils-turbo_3.jpg?v=1794460882"},{"product_id":"metalcloak-steering-stabilizer-tie-rod-mount-1-375in-jeep-wrangler-jk-2007-2018","title":"MetalCloak Steering Stabilizer Tie Rod Mount | 1.375in | Jeep Wrangler JK (2007-2018) | P\/N 7086","description":"\u003cp\u003eThis mount clamps onto the stock 1.375in tie rod of the 2007-2018 Jeep Wrangler JK and Wrangler Unlimited so a stem mount type steering stabilizer can attach to it. The mount rotates to align the damper with the axle side bracket.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFits the stock 1.375in tie rod\u003c\/li\u003e\n\u003cli\u003eAllows stem mount type stabilizers to attach to the tie rod\u003c\/li\u003e\n\u003cli\u003eRotates to align the damper to the axle side bracket\u003c\/li\u003e\n\u003cli\u003eCNC formed and CAD designed\u003c\/li\u003e\n\u003cli\u003eBolt-on, no welding\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 3\/16in hot rolled steel plate\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc\u003c\/li\u003e\n\u003cli\u003eFits: 1.375in diameter tie rod\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eBody modification: none\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTie rod stabilizer mount\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFor the stock 1.375in diameter tie rod only.\u003c\/li\u003e\n\u003cli\u003eDesigned to be used with the RockSport steering stabilizer.\u003c\/li\u003e\n\u003cli\u003eAn alignment by a suspension specialist is recommended after a MetalCloak suspension is installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler JK (2007-2018)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 7086\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145274585404,"sku":"7086","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/7686-with-logo.jpg?v=1794460892"},{"product_id":"metalcloak-1-1-2in-overline-front-rub-rails-pair-jeep-wrangler-tj-lj-1997-2006-yj-1987-1995","title":"MetalCloak 1-1\/2in Overline Front Rub Rails | Pair | Jeep Wrangler TJ\/LJ (1997-2006)\/YJ (1987-1995) | P\/N 2221","description":"\u003cp\u003eThese front rub rails give 1-1\/2in of tire coverage and mount to MetalCloak Overline tube fenders with ball lock joints. They attach and detach quickly.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDriver and passenger rub rails\u003c\/li\u003e\n\u003cli\u003eBall lock joint attachment\u003c\/li\u003e\n\u003cli\u003e7 degree object deflection angle\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCoverage: 1-1\/2in\u003c\/li\u003e\n\u003cli\u003eStructure: 1.5in OD x 0.120in wall steel tube\u003c\/li\u003e\n\u003cli\u003eFinish: Raw Metal or Black Powder Coat (variant option)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRequires MetalCloak Overline tube fenders; the rub rails mount only to those fenders.\u003c\/li\u003e\n\u003cli\u003eTest fit the part before custom painting or powder coating; custom finish costs are not covered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler TJ (1997-2006)\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler LJ (2004-2006)\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler YJ (1987-1995)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 2221\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Raw Metal","offer_id":68145276944700,"sku":"2221","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/2wtrrt221-with-logo.jpg?v=1794460971"},{"product_id":"metalcloak-rocksport-slate-twin-tube-shocks-front-pair-jeep-wrangler-jl-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak RockSport Slate Twin-Tube Shocks | Front, Pair | Jeep Wrangler JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N 1030","description":"\u003cp\u003eRockSport Slate front shocks use the same valving as the RockSport RED twin-tube shocks, in a new finish, and give long travel with a softer ride. They fit the 2018-2026 Jeep Wrangler JL and 2020-2026 Gladiator JT and are valved to work with MetalCloak True Dual Rate Coils.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLong-travel twin-tube design with an inner working tube and an outer reserve gas tube\u003c\/li\u003e\n\u003cli\u003eBuilt-in outboard upper mount\u003c\/li\u003e\n\u003cli\u003eOversized 18mm chrome plated shaft\u003c\/li\u003e\n\u003cli\u003eDouble-welded bushing eyes\u003c\/li\u003e\n\u003cli\u003eNatural rubber mount bushings\u003c\/li\u003e\n\u003cli\u003eNitrogen gas charge to resist aeration and fade\u003c\/li\u003e\n\u003cli\u003eValved to work with MetalCloak True Dual Rate Coils\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesign: twin-tube\u003c\/li\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eShaft: 18mm chrome plated\u003c\/li\u003e\n\u003cli\u003eFits: Wrangler JL and Gladiator JT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRockSport Slate front shocks (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDoes not fit a Jeep with no lift.\u003c\/li\u003e\n\u003cli\u003eDoes not fit the Gladiator Mojave.\u003c\/li\u003e\n\u003cli\u003eThe Outboard Shock Mount Spacer Kit is sold separately.\u003c\/li\u003e\n\u003cli\u003eProfessional alignment recommended after installing a MetalCloak suspension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1030\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145277272380,"sku":"1030","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1031-with-logo.jpg?v=1794460981"},{"product_id":"metalcloak-rocksport-slate-twin-tube-shocks-rear-pair-jeep-wrangler-jl-2018-2026","title":"MetalCloak RockSport Slate Twin-Tube Shocks | Rear, Pair | Jeep Wrangler JL (2018-2026) | P\/N 1031","description":"\u003cp\u003eRockSport Slate rear shocks use the same valving as the RockSport RED twin-tube shocks, in a new finish, and give long travel with a softer ride. They fit the 2018-2026 Jeep Wrangler JL and are valved to work with MetalCloak True Dual Rate Coils.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLong-travel twin-tube design with an inner working tube and an outer reserve gas tube\u003c\/li\u003e\n\u003cli\u003eBuilt-in outboard upper mount\u003c\/li\u003e\n\u003cli\u003eOversized 18mm chrome plated shaft\u003c\/li\u003e\n\u003cli\u003eDouble-welded bushing eyes\u003c\/li\u003e\n\u003cli\u003eNatural rubber mount bushings\u003c\/li\u003e\n\u003cli\u003eNitrogen gas charge to resist aeration and fade\u003c\/li\u003e\n\u003cli\u003eValved to work with MetalCloak True Dual Rate Coils\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesign: twin-tube\u003c\/li\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eShaft: 18mm chrome plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRockSport Slate rear shocks (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDoes not fit a Jeep with no lift.\u003c\/li\u003e\n\u003cli\u003eProfessional alignment recommended after installing a MetalCloak suspension.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1031\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145277567292,"sku":"1031","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1031-with-logo_1.jpg?v=1794460991"},{"product_id":"metalcloak-rocksport-red-long-travel-shocks-rear-pair-4-5in-lift-jeep-gladiator-jt-2019-2026","title":"MetalCloak RockSport RED Long Travel Shocks | Rear, Pair, 4.5in Lift | Jeep Gladiator JT (2019-2026) | P\/N 1055","description":"\u003cp\u003eThese RockSport RED rear long travel shocks are made for the Jeep Gladiator JT with a 4.5in lift. They are twin-tube shocks with proprietary valving that is tuned to MetalCloak True Dual Rate coils for stable daily driving and long travel articulation.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOversized 18mm chrome shafts\u003c\/li\u003e\n\u003cli\u003eDouble-welded bushing eyes\u003c\/li\u003e\n\u003cli\u003eNatural rubber mount bushings\u003c\/li\u003e\n\u003cli\u003eNitrogen gas charged to resist fading\u003c\/li\u003e\n\u003cli\u003eShaft length stone guard\u003c\/li\u003e\n\u003cli\u003eTwin-tube design with proprietary valving tuned to work with MetalCloak True Dual Rate coils\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift: 4.5in\u003c\/li\u003e\n\u003cli\u003eShaft: 18mm chrome\u003c\/li\u003e\n\u003cli\u003eConstruction: twin-tube, nitrogen gas charged\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eBody modification: none\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 to 2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRear RockSport RED shocks (2)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWill not fit a Jeep with no lift.\u003c\/li\u003e\n\u003cli\u003eAlignment by a suspension specialist is recommended after a MetalCloak suspension is installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Gladiator JT (2019-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1055\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145277796668,"sku":"1055","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1055-new-with-logo.jpg?v=1794460999"},{"product_id":"metalcloak-duroflex-front-control-arm-set-ram-1500-2500-3500-1994-1999","title":"MetalCloak Duroflex Front Control Arm Set | Ram 1500\/2500\/3500 (1994-1999) | P\/N 8000","description":"\u003cp\u003eThis front control arm set fits the 1994-1999 Ram 1500\/2500\/3500. The Duroflex joints stay centered and aligned with the frame and axle, and the arms are made in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar, self-centering and vibration damping\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable joints\u003c\/li\u003e\n\u003cli\u003eDesigned for up and down travel\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJoint misalignment: 34 degrees\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc chromate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eProfessional alignment recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 1500\/2500\/3500 (1994-1999)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8000\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145278026044,"sku":"8000","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/8000-wisdfsdfth-logo.jpg?v=1794461009"},{"product_id":"metalcloak-duroflex-front-control-arm-set-ram-1500-2500-3500-2000-2002","title":"MetalCloak Duroflex Front Control Arm Set | Ram 1500\/2500\/3500 (2000-2002) | P\/N 8001","description":"\u003cp\u003eThis front control arm set fits the 2000-2002 Ram 1500\/2500\/3500. The Duroflex joints stay centered and aligned with the frame and axle, and the arms are made in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar, self-centering and vibration damping\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable joints\u003c\/li\u003e\n\u003cli\u003eDesigned for up and down travel\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJoint misalignment: 34 degrees\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc chromate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eProfessional alignment recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 1500\/2500\/3500 (2000-2002)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8001\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145278484796,"sku":"8001","price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/80sdfsdf01-with-logo.jpg?v=1794461018"},{"product_id":"metalcloak-duroflex-front-control-arm-set-upper-and-lower-ram-2500-3500-2003-2009","title":"MetalCloak Duroflex Front Control Arm Set | Upper and Lower | Ram 2500\/3500 (2003-2009) | P\/N 8002","description":"\u003cp\u003eThis front control arm set fits the 2003-2009 Ram 2500\/3500 and uses Duroflex joints at both ends of each arm. The arms are engineered in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar fiber\u003c\/li\u003e\n\u003cli\u003eVibration damping and self-centering joints\u003c\/li\u003e\n\u003cli\u003eOver 34 degrees of misalignment per joint, over 68 degrees per control arm\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable: remove the bushing, clean it and apply fresh grease\u003c\/li\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eGold zinc plated\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTubing: 3\/16in wall DOM steel, CNC machined\u003c\/li\u003e\n\u003cli\u003eJoints: Duroflex joint at both ends, precision locking nut\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFront upper control arms\u003c\/li\u003e\n\u003cli\u003eFront lower control arms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eAlignment by a suspension specialist is recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 2500\/3500 (2003-2009)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8002\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145278746940,"sku":"8002","price":574.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/8002-sdfsdfwith-logo.jpg?v=1794461027"},{"product_id":"metalcloak-duroflex-front-control-arm-set-upper-and-lower-ram-2500-3500-2010-2012","title":"MetalCloak Duroflex Front Control Arm Set | Upper and Lower | Ram 2500\/3500 (2010-2012) | P\/N 8003","description":"\u003cp\u003eThis front control arm set fits the 2010-2012 Ram 2500\/3500 and uses Duroflex joints at both ends of each arm. The arms are engineered in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar fiber\u003c\/li\u003e\n\u003cli\u003eVibration damping and self-centering joints\u003c\/li\u003e\n\u003cli\u003eOver 34 degrees of misalignment per joint, over 68 degrees per control arm\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable: remove the bushing, clean it and apply fresh grease\u003c\/li\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eGold zinc plated\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTubing: 3\/16in wall DOM steel, CNC machined\u003c\/li\u003e\n\u003cli\u003eJoints: Duroflex joint at both ends, precision locking nut\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFront upper control arms\u003c\/li\u003e\n\u003cli\u003eFront lower control arms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eAlignment by a suspension specialist is recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 2500\/3500 (2010-2012)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8003\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145278976316,"sku":"8003","price":573.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/8003-cvbvcbwith-logo.jpg?v=1794461036"},{"product_id":"metalcloak-duroflex-lower-front-control-arm-set-ram-2500-3500-2000-2009","title":"MetalCloak Duroflex Lower Front Control Arm Set | Ram 2500\/3500 (2000-2009) | P\/N 8006","description":"\u003cp\u003eThis lower front control arm set fits the 2000-2009 Ram 2500\/3500 and uses Duroflex joints at both ends of each arm. The arms are engineered in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar fiber\u003c\/li\u003e\n\u003cli\u003eVibration damping and self-centering joints\u003c\/li\u003e\n\u003cli\u003eOver 34 degrees of misalignment per joint, over 68 degrees per control arm\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable: remove the bushing, clean it and apply fresh grease\u003c\/li\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eGold zinc plated\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: lower front\u003c\/li\u003e\n\u003cli\u003eTubing: 3\/16in wall DOM steel, 1.5in OD, CNC machined\u003c\/li\u003e\n\u003cli\u003eJoints: Duroflex joint at both ends, precision locking nut\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eAlignment by a suspension specialist is recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 2500\/3500 (2000-2009)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8006\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145279238460,"sku":"8006","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/sds8006-with-logo.jpg?v=1794461045"},{"product_id":"metalcloak-duroflex-lower-front-control-arm-set-ram-1500-2500-3500-1994-1999","title":"MetalCloak Duroflex Lower Front Control Arm Set | Ram 1500\/2500\/3500 (1994-1999) | P\/N 8004","description":"\u003cp\u003eThis lower front control arm set fits the 1994-1999 Ram 1500\/2500\/3500. The Duroflex joints stay centered and aligned with the frame and axle, and the arms are made in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar, self-centering and vibration damping\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable joints\u003c\/li\u003e\n\u003cli\u003eDesigned for up and down travel\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJoint misalignment: 34 degrees\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc chromate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eProfessional alignment recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 1500\/2500\/3500 (1994-1999)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8004\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145279467836,"sku":"8004","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/8dfgdfg004-with-logo.jpg?v=1794461054"},{"product_id":"metalcloak-duroflex-lower-front-control-arms-ram-2500-3500-2010-2012","title":"MetalCloak Duroflex Lower Front Control Arms | Ram 2500\/3500 (2010-2012) | P\/N 8008","description":"\u003cp\u003eThese lower front control arms fit the 2010-2012 Ram 2500\/3500 and use Duroflex joints at both ends. The arms are engineered in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar fiber\u003c\/li\u003e\n\u003cli\u003eVibration damping and self-centering joints\u003c\/li\u003e\n\u003cli\u003eOver 34 degrees of misalignment per joint, over 68 degrees per control arm\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable: remove the bushing, clean it and apply fresh grease\u003c\/li\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eGold zinc plated\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: lower front\u003c\/li\u003e\n\u003cli\u003eTubing: 3\/16in wall DOM steel, 1.5in OD, CNC machined\u003c\/li\u003e\n\u003cli\u003eJoints: Duroflex joint at both ends, precision locking nut\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eAlignment by a suspension specialist is recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 2500\/3500 (2010-2012)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8008\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145279697212,"sku":"8008","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/asdad8008-with-logo.jpg?v=1794461063"},{"product_id":"metalcloak-duroflex-upper-front-control-arms-ram-1500-2500-3500-1994-2002","title":"MetalCloak Duroflex Upper Front Control Arms | Ram 1500\/2500\/3500 (1994-2002) | P\/N 8005","description":"\u003cp\u003eThis pair of upper front control arms fits the 1994-2002 Ram 1500\/2500\/3500. The Duroflex joints stay centered and aligned with the frame and axle, and the arms are made in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar, self-centering and vibration damping\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable joints\u003c\/li\u003e\n\u003cli\u003eDesigned for up and down travel\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJoint misalignment: 34 degrees\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc chromate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eProfessional alignment recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 1500\/2500\/3500 (1994-2002)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8005\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145279959356,"sku":"8005","price":184.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/8cvbcv005-with-logo.jpg?v=1794461073"},{"product_id":"metalcloak-duroflex-upper-front-control-arms-ram-2500-3500-2003-2012","title":"MetalCloak Duroflex Upper Front Control Arms | Ram 2500\/3500 (2003-2012) | P\/N 8007","description":"\u003cp\u003eThese upper front control arms fit the 2003-2012 Ram 2500\/3500 and use Duroflex joints at both ends. The arms are engineered in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar fiber\u003c\/li\u003e\n\u003cli\u003eVibration damping and self-centering joints\u003c\/li\u003e\n\u003cli\u003eOver 34 degrees of misalignment per joint, over 68 degrees per control arm\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable: remove the bushing, clean it and apply fresh grease\u003c\/li\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eGold zinc plated\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: upper front\u003c\/li\u003e\n\u003cli\u003eTubing: 3\/16in wall DOM steel, 1.25in OD, CNC machined\u003c\/li\u003e\n\u003cli\u003eJoints: Duroflex joint at both ends, precision locking nut\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eAlignment by a suspension specialist is recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 2500\/3500 (2003-2012)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8007\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145280188732,"sku":"8007","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/2343248007-with-logo.jpg?v=1794461082"},{"product_id":"metalcloak-duroflex-upper-front-control-arms-ram-2500-3500-2010-2012","title":"MetalCloak Duroflex Upper Front Control Arms | Ram 2500\/3500 (2010-2012) | P\/N 8009","description":"\u003cp\u003eThese upper front control arms fit the 2010-2012 Ram 2500\/3500 and use Duroflex joints at both ends. The arms are engineered in corrected lengths for lifted or leveling applications.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDuroflex joints enhanced with Kevlar fiber\u003c\/li\u003e\n\u003cli\u003eVibration damping and self-centering joints\u003c\/li\u003e\n\u003cli\u003eMaintenance free and rebuildable: remove the bushing, clean it and apply fresh grease\u003c\/li\u003e\n\u003cli\u003eCNC formed steel tubing\u003c\/li\u003e\n\u003cli\u003eGold zinc plated\u003c\/li\u003e\n\u003cli\u003eCorrected lengths for lifted or leveling applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: upper front\u003c\/li\u003e\n\u003cli\u003eTubing: 1.25in OD x 0.187in wall, CNC machined\u003c\/li\u003e\n\u003cli\u003eJoints: Duroflex joint at both ends, precision locking nut\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eAlignment by a suspension specialist is recommended after installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 2500\/3500 (2010-2012)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 8009\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145280450876,"sku":"8009","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/8009-with-logo.jpg?v=1794461091"},{"product_id":"metalcloak-rocksport-black-shock-seal-rebuild-kit","title":"MetalCloak RockSport BLACK Shock Seal Rebuild Kit | P\/N 1604","description":"\u003cp\u003eThis kit replaces the worn seals and bumpers in a RockSport BLACK shock. New seals restore the damping response, stop leaks and extend the life of the shock.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTop-out and bottom-out bumpers\u003c\/li\u003e\n\u003cli\u003eU-cup seal\u003c\/li\u003e\n\u003cli\u003eWiper seals and wear seals\u003c\/li\u003e\n\u003cli\u003eBack-up ring\u003c\/li\u003e\n\u003cli\u003eO-rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompatibility: RockSport BLACK shocks\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eBody modification: none\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTop-out bumper (1)\u003c\/li\u003e\n\u003cli\u003eBottom-out bumper (1)\u003c\/li\u003e\n\u003cli\u003eU-cup seal (1)\u003c\/li\u003e\n\u003cli\u003eWiper seal (2)\u003c\/li\u003e\n\u003cli\u003eWear seal (2)\u003c\/li\u003e\n\u003cli\u003eBack-up ring (1)\u003c\/li\u003e\n\u003cli\u003eO-rings (10)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1604\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145280713020,"sku":"1604","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1604-new-with-logo.jpg?v=1794461100"},{"product_id":"metalcloak-rocksport-black-shock-seal-head-rebuild-kit","title":"MetalCloak RockSport BLACK Shock Seal Head Rebuild Kit | P\/N 1605","description":"\u003cp\u003eThis rebuild kit supplies a complete pre-assembled seal head with the seals needed to restore a RockSport BLACK shock to like-new mechanical condition. The difficult parts are already in place, and the O-rings needed to reseal the shock are included.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eComes pre-assembled\u003c\/li\u003e\n\u003cli\u003eSeal head\u003c\/li\u003e\n\u003cli\u003eSleeve bearing\u003c\/li\u003e\n\u003cli\u003eU-cup seal\u003c\/li\u003e\n\u003cli\u003eWiper seal\u003c\/li\u003e\n\u003cli\u003eBack-up ring\u003c\/li\u003e\n\u003cli\u003eO-rings to reseal the shock\u003c\/li\u003e\n\u003cli\u003eNew bottom-out bumper included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompatibility: RockSport BLACK shocks\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eBody modification: none\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eSeal head (1)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1605\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145280975164,"sku":"1605","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1605-new-with-logo.jpg?v=1794461110"},{"product_id":"metalcloak-rocksport-black-rear-reservoir-mount-relocation-brackets-jeep-wrangler-jk-2007-2018","title":"MetalCloak RockSport BLACK Rear Reservoir Mount Relocation Brackets | Jeep Wrangler JK (2007-2018) | P\/N 1626","description":"\u003cp\u003eThese brackets mount the rear remote shock reservoirs of RockSport BLACK shocks on the 2007-2018 Jeep Wrangler JK and Wrangler Unlimited. They attach to the outboard frame rails and keep the reservoir adjustment knobs accessible.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePassenger and driver side rear reservoir mount brackets\u003c\/li\u003e\n\u003cli\u003eEasy access to the shock adjustment knobs\u003c\/li\u003e\n\u003cli\u003eAttach to the outboard frame rails\u003c\/li\u003e\n\u003cli\u003eCustom adjustable gold zinc finished clamps\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/8in hot rolled steel\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eBody modification: drilling\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReservoir mounts (2)\u003c\/li\u003e\n\u003cli\u003eRemote shock clamps (4)\u003c\/li\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler JK (2007-2018)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1626\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145281335612,"sku":"1626","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1626-with-logo.jpg?v=1794461119"},{"product_id":"metalcloak-rocksport-black-non-adjustable-shocks-front-2-5in-3-5in-lift-jeep-wrangler-jl-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak RockSport BLACK Non-Adjustable Shocks | Front, 2.5in\/3.5in Lift | Jeep Wrangler JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N 1632","description":"\u003cp\u003eThese RockSport BLACK front remote reservoir shocks are non-adjustable units for the 2018-2026 Jeep Wrangler JL and 2020-2026 Gladiator JT, listed for 2.5in and 3.5in lift heights. The 2.5in aluminum body holds a large fluid volume, and the digressive valving is made to work with MetalCloak True Dual Rate Coils.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNon-adjustable valving\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall, oversized for cooling\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III hard anodized black Infinity finish\u003c\/li\u003e\n\u003cli\u003eRemote reservoir on a rubber covered, stainless steel braided hose rated for 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in hard chrome plated shaft, induction hardened to Rockwell C 60+\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized piston\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack with digressive valving tuned for True Dual Rate Coils\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003cli\u003eBuilt-in offset stand-off mounts for an OE-style fit with long-travel capability\u003c\/li\u003e\n\u003cli\u003eGold zinc reservoir mount and lower shock mount included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in hard chrome plated, induction hardened\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized black\u003c\/li\u003e\n\u003cli\u003eListed lift height: 2.5in\/3.5in (as shown in the product name)\u003c\/li\u003e\n\u003cli\u003eReservoir mount: 1\/8in laser-cut steel, gold zinc\u003c\/li\u003e\n\u003cli\u003eLower shock mount: 3\/16in hot-rolled steel, gold zinc\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRemote reservoir shocks (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThese are 2.5in diameter, large-bodied shocks that fit directly with the model specific brackets for the JL Wrangler or JT Gladiator.\u003c\/li\u003e\n\u003cli\u003e2.5in diameter shocks need model specific consideration for fitment, such as additional bump stops, properly back spaced wheels and brake caliper clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1632\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145281630524,"sku":"1632","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1632-with-logo_1.jpg?v=1794461128"},{"product_id":"metalcloak-rocksport-black-non-adjustable-shocks-front-4-5in-5-5in-lift-jeep-wrangler-jl-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak RockSport BLACK Non-Adjustable Shocks | Front, 4.5in\/5.5in Lift | Jeep Wrangler JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N 1633","description":"\u003cp\u003eThese RockSport BLACK front remote reservoir shocks are non-adjustable units for the 2018-2026 Jeep Wrangler JL and 2020-2026 Gladiator JT, listed for 4.5in and 5.5in lift heights. The 2.5in aluminum body holds a large fluid volume, and the digressive valving is made to work with MetalCloak True Dual Rate Coils.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNon-adjustable valving\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall, oversized for cooling\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III hard anodized black Infinity finish\u003c\/li\u003e\n\u003cli\u003eRemote reservoir on a rubber covered, stainless steel braided hose rated for 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in hard chrome plated shaft, induction hardened to Rockwell C 60+\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized piston\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack with digressive valving tuned for True Dual Rate Coils\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003cli\u003eBuilt-in offset stand-off mounts for an OE-style fit with long-travel capability\u003c\/li\u003e\n\u003cli\u003eGold zinc reservoir mount and lower shock mount included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in hard chrome plated, induction hardened\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized black\u003c\/li\u003e\n\u003cli\u003eListed lift height: 4.5in\/5.5in (as shown in the product name)\u003c\/li\u003e\n\u003cli\u003eReservoir mount: 1\/8in laser-cut steel, gold zinc\u003c\/li\u003e\n\u003cli\u003eLower shock mount: 3\/16in hot-rolled steel, gold zinc\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRemote reservoir shocks (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThese are 2.5in diameter, large-bodied shocks that fit directly with the model specific brackets for the JL Wrangler or JT Gladiator.\u003c\/li\u003e\n\u003cli\u003e2.5in diameter shocks need model specific consideration for fitment, such as additional bump stops, properly back spaced wheels and brake caliper clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1633\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145281892668,"sku":"1633","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1633-with-logo_2.jpg?v=1794461137"},{"product_id":"metalcloak-rocksport-black-non-adjustable-shocks-rear-2-5in-3-5in-lift-jeep-wrangler-jl-2018-2026","title":"MetalCloak RockSport BLACK Non-Adjustable Shocks | Rear, 2.5in\/3.5in Lift | Jeep Wrangler JL (2018-2026) | P\/N 1634","description":"\u003cp\u003eThese RockSport BLACK rear remote reservoir shocks are non-adjustable units for the 2018-2026 Jeep Wrangler JL, listed for 2.5in and 3.5in lift heights. The 2.5in aluminum body holds a large fluid volume, and the digressive valving is made to work with MetalCloak True Dual Rate Coils.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNon-adjustable valving\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall, oversized for cooling\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III hard anodized black Infinity finish\u003c\/li\u003e\n\u003cli\u003eRemote reservoir on a rubber covered, stainless steel braided hose rated for 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in hard chrome plated shaft, induction hardened to Rockwell C 60+\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized piston\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack with digressive valving tuned for True Dual Rate Coils\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003cli\u003eBuilt-in offset stand-off mounts for an OE-style fit with long-travel capability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in hard chrome plated, induction hardened\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized black\u003c\/li\u003e\n\u003cli\u003eListed lift height: 2.5in\/3.5in (as shown in the product name)\u003c\/li\u003e\n\u003cli\u003eExtended length: 28.5in\u003c\/li\u003e\n\u003cli\u003eCollapsed length: 17.2in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRemote reservoir shocks (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThese are 2.5in diameter, large-bodied shocks that fit directly on wide track axle Jeeps such as the Rubicon and Max Tow.\u003c\/li\u003e\n\u003cli\u003eOn standard width axle models they need additional modification for fitment, such as additional bump stops, low backspaced wheels and brake caliper clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1634\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145282285884,"sku":"1634","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1634-with-logo_1.jpg?v=1794461146"},{"product_id":"metalcloak-rocksport-black-non-adjustable-shocks-rear-4-5in-5-5in-lift-jeep-wrangler-jl-2018-2026","title":"MetalCloak RockSport BLACK Non-Adjustable Shocks | Rear, 4.5in\/5.5in Lift | Jeep Wrangler JL (2018-2026) | P\/N 1635","description":"\u003cp\u003eThese RockSport BLACK rear remote reservoir shocks are non-adjustable units for the 2018-2026 Jeep Wrangler JL, listed for 4.5in and 5.5in lift heights. The 2.5in aluminum body holds a large fluid volume, and the digressive valving is made to work with MetalCloak True Dual Rate Coils.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNon-adjustable valving\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall, oversized for cooling\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III hard anodized black Infinity finish\u003c\/li\u003e\n\u003cli\u003eRemote reservoir on a rubber covered, stainless steel braided hose rated for 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in hard chrome plated shaft, induction hardened to Rockwell C 60+\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized piston\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack with digressive valving tuned for True Dual Rate Coils\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003cli\u003eBuilt-in offset stand-off mounts for an OE-style fit with long-travel capability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in hard chrome plated, induction hardened\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized black\u003c\/li\u003e\n\u003cli\u003eListed lift height: 4.5in\/5.5in (as shown in the product name)\u003c\/li\u003e\n\u003cli\u003eExtended length: 30.5in\u003c\/li\u003e\n\u003cli\u003eCollapsed length: 18.2in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRemote reservoir shocks (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThese are 2.5in diameter, large-bodied shocks that fit directly on wide track axle Jeeps such as the Rubicon and Max Tow.\u003c\/li\u003e\n\u003cli\u003eOn standard width axle models they need additional modification for fitment, such as additional bump stops, low backspaced wheels and brake caliper clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1635\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145282548028,"sku":"1635","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1635-with-logo.jpg?v=1794461155"},{"product_id":"metalcloak-rocksport-black-non-adj-shocks-front-2-5in-3-5in-lift-std-axle-jeep-wrangler-jl-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak RockSport BLACK Non-Adj Shocks | Front, 2.5in\/3.5in Lift, Std Axle | Jeep Wrangler JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N 1636","description":"\u003cp\u003eThese RockSport BLACK front remote reservoir shocks are non-adjustable units for the 2018-2026 Jeep Wrangler JL and 2020-2026 Gladiator JT, listed for 2.5in and 3.5in lift heights. The 2.5in aluminum body holds a large fluid volume, and the digressive valving is made to work with MetalCloak True Dual Rate Coils.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNon-adjustable valving\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall, oversized for cooling\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III hard anodized black Infinity finish\u003c\/li\u003e\n\u003cli\u003eRemote reservoir on a rubber covered, stainless steel braided hose rated for 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in hard chrome plated shaft, induction hardened to Rockwell C 60+\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized piston\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack with digressive valving tuned for True Dual Rate Coils\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003cli\u003eBuilt-in offset stand-off mounts for an OE-style fit with long-travel capability\u003c\/li\u003e\n\u003cli\u003eGold zinc reservoir mount and lower shock mount included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in hard chrome plated, induction hardened\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized black\u003c\/li\u003e\n\u003cli\u003eListed lift height: 2.5in\/3.5in (as shown in the product name)\u003c\/li\u003e\n\u003cli\u003eReservoir mount: 1\/8in laser-cut steel, gold zinc\u003c\/li\u003e\n\u003cli\u003eLower shock mount: 3\/16in hot-rolled steel, gold zinc\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRemote reservoir shocks (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThese are 2.5in diameter, large-bodied shocks that fit directly with the model specific brackets for the JL Wrangler or JT Gladiator.\u003c\/li\u003e\n\u003cli\u003e2.5in diameter shocks need model specific consideration for fitment, such as additional bump stops, properly back spaced wheels and brake caliper clearance.\u003c\/li\u003e\n\u003cli\u003eThe Standard Axle Edition is made for Jeeps with standard width axles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1636\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145282777404,"sku":"1636","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1636-with-logo_1_1.jpg?v=1794461164"},{"product_id":"metalcloak-front-reservoir-mount-kit-jeep-wrangler-jk-2007-2018","title":"MetalCloak Front Reservoir Mount Kit | Jeep Wrangler JK (2007-2018) | P\/N 1637","description":"\u003cp\u003eThis kit mounts and positions the remote reservoirs of front shocks on the 2007-2018 Jeep Wrangler JK. The brackets are 1\/8in hot rolled steel finished in gold zinc chromate, and hose clamps and hardware are included.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReservoir mounting brackets for the front shocks\u003c\/li\u003e\n\u003cli\u003e1\/8in hot rolled steel construction\u003c\/li\u003e\n\u003cli\u003eIncludes hose clamps and all required hardware\u003c\/li\u003e\n\u003cli\u003eGold zinc finish\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBrackets: 1\/8in hot rolled steel\u003c\/li\u003e\n\u003cli\u003eCoating: gold zinc\u003c\/li\u003e\n\u003cli\u003eInstall time: 2 to 3 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReservoir mounts (2)\u003c\/li\u003e\n\u003cli\u003eHose clamps (4)\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler JK (2007-2018)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1637\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145283006780,"sku":"1637","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1637-new-with-logo.jpg?v=1794461174"},{"product_id":"metalcloak-rocksport-black-reservoir-shocks-front-2-5in-3-5in-lift-jeep-gladiator-jt-mojave-2020-2026","title":"MetalCloak RockSport BLACK Reservoir Shocks | Front, 2.5in\/3.5in Lift | Jeep Gladiator JT Mojave (2020-2026) | P\/N 1647","description":"\u003cp\u003eThese RockSport BLACK front reservoir shocks are made for the Jeep Gladiator JT Mojave with 2.5in\/3.5in of lift, and are non-adjustable. They are built to work with MetalCloak True Dual Rate coils, and the digressive valving covers both slow and fast speed performance.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNon-adjustable valving\u003c\/li\u003e\n\u003cli\u003eRemote reservoir design with a stainless steel braided hydraulic hose\u003c\/li\u003e\n\u003cli\u003eAluminum body, 2-1\/2in diameter with 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in shafts, induction-hardened and hard chrome plated\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III hard anodized black body and clear hard anodized piston\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending)\u003c\/li\u003e\n\u003cli\u003eValved to work with MetalCloak True Dual Rate coils\u003c\/li\u003e\n\u003cli\u003eBuilt-in stand-offs for OE-quality fitment\u003c\/li\u003e\n\u003cli\u003eGold zinc shock and reservoir mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift range: 2.5in\/3.5in\u003c\/li\u003e\n\u003cli\u003eBody: 2-1\/2in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in, induction-hardened, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized black\u003c\/li\u003e\n\u003cli\u003eCompression: non-adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFront RockSport BLACK reservoir shocks (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eThe page states this shock is non-adjustable.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Gladiator JT Mojave (2020-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1647\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145283268924,"sku":"1647","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1647-with-image_1.jpg?v=1794461183"},{"product_id":"metalcloak-rocksport-black-reservoir-shocks-front-4-5in-5-5in-lift-jeep-gladiator-jt-mojave-2020-2026","title":"MetalCloak RockSport BLACK Reservoir Shocks | Front, 4.5in\/5.5in Lift | Jeep Gladiator JT Mojave (2020-2026) | P\/N 1648","description":"\u003cp\u003eThese RockSport BLACK front reservoir shocks are made for the Jeep Gladiator JT Mojave with 4.5in\/5.5in of lift, and are non-adjustable. They are built to work with MetalCloak True Dual Rate coils, and the digressive valving covers both slow and fast speed performance.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNon-adjustable valving\u003c\/li\u003e\n\u003cli\u003eRemote reservoir design with a stainless steel braided hydraulic hose\u003c\/li\u003e\n\u003cli\u003eAluminum body, 2-1\/2in diameter with 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in shafts, induction-hardened and hard chrome plated\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III hard anodized black body and clear hard anodized piston\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending)\u003c\/li\u003e\n\u003cli\u003eValved to work with MetalCloak True Dual Rate coils\u003c\/li\u003e\n\u003cli\u003eBuilt-in stand-offs for OE-quality fitment\u003c\/li\u003e\n\u003cli\u003eGold zinc shock and reservoir mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift range: 4.5in\/5.5in\u003c\/li\u003e\n\u003cli\u003eBody: 2-1\/2in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in, induction-hardened, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized black\u003c\/li\u003e\n\u003cli\u003eCompression: non-adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFront RockSport BLACK reservoir shocks (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eThe page states this shock is non-adjustable.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Gladiator JT Mojave (2020-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1648\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145283596604,"sku":"1648","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1648-with-image.jpg?v=1794461192"},{"product_id":"metalcloak-rocksport-black-adjustable-reservoir-front-coilovers-2-5-4in-lift-ford-bronco-2021-2026","title":"MetalCloak RockSport BLACK Adjustable Reservoir Front Coilovers | 2.5-4in Lift | Ford Bronco (2021-2026) | P\/N 1659","description":"\u003cp\u003eRockSport BLACK front coilovers for the 2021-2026 Ford Bronco combine an eight-position adjustable remote reservoir with height-adjustable coil springs. They cover a 2.5in to 4in lift range, depending on the Bronco model and whether it has the Sasquatch package.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable with gold anodized coil adjustment collars\u003c\/li\u003e\n\u003cli\u003eEasy 8 setting compression adjustment on a billet aluminum knob\u003c\/li\u003e\n\u003cli\u003eSpecifically tuned heavy-duty coils\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall and a large fluid capacity\u003c\/li\u003e\n\u003cli\u003eRubber-covered stainless steel braided hydraulic hose\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in induction-hardened, hard chrome plated shaft\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eHigh-flow piston with nine ports: six for compression and three for rebound\u003c\/li\u003e\n\u003cli\u003eRecessed inner cap for more usable travel without a longer shock\u003c\/li\u003e\n\u003cli\u003eGold zinc shock and reservoir mounts, heavy-duty lower bar pin mounts\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift range: 2.5in to 4in\u003c\/li\u003e\n\u003cli\u003eLength, eye to eye: 24.7in extended, 18.8in compressed\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: 8 settings, about 15% more compression force per click\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, synthetic lined, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized Black Infinity\u003c\/li\u003e\n\u003cli\u003ePiston: Mil-Spec Type III clear hard anodized\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in, Rockwell C 60+ surface, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eMounting brackets: 1\/8in hot rolled steel, gold zinc plated\u003c\/li\u003e\n\u003cli\u003eCoil adjustment collars: gold anodized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair.\u003c\/li\u003e\n\u003cli\u003eLift height depends on the Bronco model and whether it has the Sasquatch package. Limits of factory or aftermarket equipment determine the proper settings, and improper setup can damage the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1659\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145283825980,"sku":"1659","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/16erter59-new-with-logo.jpg?v=1794461201"},{"product_id":"metalcloak-rocksport-black-adjustable-reservoir-rear-coilovers-2-5-4in-lift-ford-bronco-2021-2026","title":"MetalCloak RockSport BLACK Adjustable Reservoir Rear Coilovers | 2.5-4in Lift | Ford Bronco (2021-2026) | P\/N 1660","description":"\u003cp\u003eRockSport BLACK rear coilovers for the 2021-2026 Ford Bronco combine an eight-position adjustable remote reservoir with height-adjustable coil springs. They cover a 2.5in to 4in lift range, depending on the Bronco model and whether it has the Sasquatch package.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHeight adjustable with gold anodized coil adjustment collars\u003c\/li\u003e\n\u003cli\u003eEasy 8 setting compression adjustment on a billet aluminum knob\u003c\/li\u003e\n\u003cli\u003eSpecifically tuned heavy-duty coils\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall and a large fluid capacity\u003c\/li\u003e\n\u003cli\u003eRubber-covered stainless steel braided hydraulic hose\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in induction-hardened, hard chrome plated shaft\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eHigh-flow piston with nine ports: six for compression and three for rebound\u003c\/li\u003e\n\u003cli\u003eRecessed inner cap for more usable travel without a longer shock\u003c\/li\u003e\n\u003cli\u003eGold zinc shock and reservoir mounts\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eLift range: 2.5in to 4in\u003c\/li\u003e\n\u003cli\u003eLength, eye to eye: 29.2in extended, 18.1in compressed\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: 8 settings, about 15% more compression force per click\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, synthetic lined, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized Black Infinity\u003c\/li\u003e\n\u003cli\u003ePiston: Mil-Spec Type III clear hard anodized\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in, Rockwell C 60+ surface, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eMounting brackets: 1\/8in hot rolled steel, gold zinc plated\u003c\/li\u003e\n\u003cli\u003eCoil adjustment collars: gold anodized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair.\u003c\/li\u003e\n\u003cli\u003eLift height depends on the Bronco model and whether it has the Sasquatch package. Limits of factory or aftermarket equipment determine the proper settings, and improper setup can damage the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eFord Bronco (2021-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1660\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145284088124,"sku":"1660","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1660-new-with-logo.jpg?v=1794461211"},{"product_id":"metalcloak-rocksport-black-adjustable-reservoir-front-shocks-3-5in-ram-2500","title":"MetalCloak RockSport BLACK Adjustable Reservoir Front Shocks | 3.5in | Ram 2500 | P\/N 1675","description":"\u003cp\u003eThese RockSport BLACK 3.5in front shocks for the Ram 2500 use a 2.5in aluminum body with a remote reservoir and eight compression settings. They are made to work with MetalCloak True Dual Rate coils, with digressive valving for low- and high-speed performance.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEasy 8 setting compression adjustment on a billet aluminum knob with laser-marked numbers\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall and a large internal volume to help them stay cool\u003c\/li\u003e\n\u003cli\u003eStainless steel braided, synthetic-lined reservoir hose rated at 3,000 psi\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eMaximum shaft length used for added travel, with end caps machined out for more stroke\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized shock piston\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSize: 3.5in\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: 8 settings, about 15% more compression force per click\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003ePiston: Mil-Spec Type III clear hard anodized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eSold as a pair.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1675\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145284317500,"sku":"1675","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1675-with-logo.jpg?v=1794461220"},{"product_id":"metalcloak-rocksport-black-adjustable-reservoir-front-shocks-4-5in-ram-2500-2014-2026","title":"MetalCloak RockSport BLACK Adjustable Reservoir Front Shocks | 4.5in | Ram 2500 (2014-2026) | P\/N 1676","description":"\u003cp\u003eThese RockSport BLACK 4.5in front shocks for the Ram 2500 use a 2.5in aluminum body with a remote reservoir and eight compression settings. They are made to work with MetalCloak True Dual Rate coils, with digressive valving for low- and high-speed performance.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEasy 8 setting compression adjustment on a billet aluminum knob with laser-marked numbers\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall and a large internal volume to help them stay cool\u003c\/li\u003e\n\u003cli\u003eStainless steel braided, synthetic-lined reservoir hose rated at 3,000 psi\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eMaximum shaft length used for added travel, with end caps machined out for more stroke\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized shock piston\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eSize: 4.5in\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: 8 settings, about 15% more compression force per click\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003ePiston: Mil-Spec Type III clear hard anodized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eSold as a pair.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 2500 (2014-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1676\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145284579644,"sku":"1676","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1675-with-logo_1.jpg?v=1794461229"},{"product_id":"metalcloak-rocksport-black-adjustable-reservoir-rear-shocks-3-5in-ram-2500-2014-2026","title":"MetalCloak RockSport BLACK Adjustable Reservoir Rear Shocks | 3.5in | Ram 2500 (2014-2026) | P\/N 1677","description":"\u003cp\u003eThese RockSport BLACK 3.5in rear shocks for the Ram 2500 use a 2.5in aluminum body with a remote reservoir and eight compression settings. They are made to work with MetalCloak True Dual Rate coils, with digressive valving for low- and high-speed performance.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEasy 8 setting compression adjustment on a billet aluminum knob with laser-marked numbers\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall and a large internal volume to help them stay cool\u003c\/li\u003e\n\u003cli\u003eStainless steel braided, synthetic-lined reservoir hose rated at 3,000 psi\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eMaximum shaft length used for added travel, with end caps machined out for more stroke\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in shafts with an induction-hardened, hard chrome plated surface\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized shock piston\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSize: 3.5in\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: 8 settings, about 15% more compression force per click\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in, induction hardened, hard chrome plated\u003c\/li\u003e\n\u003cli\u003ePiston: Mil-Spec Type III clear hard anodized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eSold as a pair.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 2500 (2014-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1677\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145284776252,"sku":"1677","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1677-with-logo.jpg?v=1794461238"},{"product_id":"metalcloak-rocksport-black-adjustable-reservoir-rear-shocks-4-5in-ram-2500-2014-2026","title":"MetalCloak RockSport BLACK Adjustable Reservoir Rear Shocks | 4.5in | Ram 2500 (2014-2026) | P\/N 1678","description":"\u003cp\u003eThese RockSport BLACK 4.5in rear shocks for the Ram 2500 use a 2.5in aluminum body with a remote reservoir and eight compression settings. They are made to work with MetalCloak True Dual Rate coils, with digressive valving for low- and high-speed performance.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEasy 8 setting compression adjustment on a billet aluminum knob with laser-marked numbers\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall and a large internal volume to help them stay cool\u003c\/li\u003e\n\u003cli\u003eStainless steel braided, synthetic-lined reservoir hose rated at 3,000 psi\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eMaximum shaft length used for added travel, with end caps machined out for more stroke\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized shock piston\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eSize: 4.5in\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: 8 settings, about 15% more compression force per click\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003ePiston: Mil-Spec Type III clear hard anodized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eSold as a pair.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eRam 2500 (2014-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1678\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145285005628,"sku":"1678","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1678-with-logo.jpg?v=1794461248"},{"product_id":"metalcloak-17-32in-rivet-nut-drill-bit","title":"MetalCloak 17\/32in Rivet Nut Drill Bit | P\/N 2912","description":"\u003cp\u003eThis 17\/32in drill bit bores the final hole size for MetalCloak installation rivet nuts. Many MetalCloak products for the Jeep Wrangler attach to the factory sheet metal with rivet nuts, and this is the bit recommended for the job.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh-speed steel with a black oxide finish\u003c\/li\u003e\n\u003cli\u003eParabolic flute clears chips and debris quickly to keep the bit cool\u003c\/li\u003e\n\u003cli\u003e135-degree split-point tip starts on contact and keeps the bit from walking\u003c\/li\u003e\n\u003cli\u003eSuited to drilling on curved surfaces and to use with portable drills\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSize: 17\/32in\u003c\/li\u003e\n\u003cli\u003eLength and shank: 6-1\/8in long, 1\/2in shank\u003c\/li\u003e\n\u003cli\u003eCoating: black oxide\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eInstall time: 10 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e17\/32in drill bit\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSized for 17\/32in rivet nuts.\u003c\/li\u003e\n\u003cli\u003eUse a sharp, quality drill bit when drilling through sheet metal for a more precise and quicker cut.\u003c\/li\u003e\n\u003cli\u003eWritten instructions are not provided for this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 2912\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145285103932,"sku":"2912","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/2912-with-logo.jpg?v=1794461257"},{"product_id":"metalcloak-rocksport-black-2-5in-reservoir-long-travel-shocks-adjustable-ineos-grenadier","title":"MetalCloak RockSport BLACK 2.5in Reservoir Long Travel Shocks | Adjustable | INEOS Grenadier | P\/N 1700","description":"\u003cp\u003eRockSport BLACK reservoir shocks for the INEOS Grenadier are 2.5in diameter aluminum shocks with 8 compression settings, so the damping can be tuned for the trail, overlanding or daily driving. They are made to work with MetalCloak True Dual Rate coils and mount with model-specific INEOS Grenadier brackets. Choose the Position option for the front or rear pair.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the INEOS Grenadier\u003c\/li\u003e\n\u003cli\u003eEasy 8 setting compression adjustment\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall for fluid capacity and cooling\u003c\/li\u003e\n\u003cli\u003eRubber-covered stainless steel braided hydraulic hose\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in shafts with an induction-hardened, hard chrome plated surface\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III clear hard anodized shock piston\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eMaximum shaft length used for added travel, with end caps machined out for more stroke\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003cli\u003eGold zinc shock and reservoir mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: 8 settings, about 15% more compression force per click\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, synthetic lined, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized Black Infinity\u003c\/li\u003e\n\u003cli\u003ePiston: Mil-Spec Type III clear hard anodized\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in, induction hardened to Rockwell C 60+, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eMounts: gold zinc\u003c\/li\u003e\n\u003cli\u003eInstallation: model-specific INEOS Grenadier brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair. Choose Front or Rear with the Position option.\u003c\/li\u003e\n\u003cli\u003eThese are large-bodied, long travel 2.5in shocks. All 2.5in shocks need model-specific fitment checks, including additional bump stops, properly backspaced wheels and brake caliper clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN 1700 - Front\u003c\/li\u003e\n\u003cli\u003eMPN 1701 - Rear\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Front","offer_id":68145285300540,"sku":"1700","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Rear","offer_id":68145285333308,"sku":"1701","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1700-new-with-logo.jpg?v=1794461266"},{"product_id":"metalcloak-hydrastrike-hydraulic-bump-stops-front-pair-jeep-wrangler-jk-2007-2018-jl-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak HydraStrike Hydraulic Bump Stops | Front, Pair | Jeep Wrangler JK (2007-2018)\/JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N 1710","description":"\u003cp\u003eHydraStrike nitrogen-charged hydraulic bump stops fit the front upper bump location on the 2007-2018 Jeep Wrangler JK, 2018-2026 JL and 2020-2026 Gladiator JT. The piston design with an internal reservoir damps from the first hit, with no warm-up needed.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNitrogen-charged, oil-damped hydraulic design\u003c\/li\u003e\n\u003cli\u003eInternal reservoir needs no warm-up, unlike emulsion-style bumps\u003c\/li\u003e\n\u003cli\u003eTube shaft with .125in wall for strength\u003c\/li\u003e\n\u003cli\u003eDisogrin seals for sealing and wear resistance\u003c\/li\u003e\n\u003cli\u003e5\/8in wide PTFE-lined shaft bearing\u003c\/li\u003e\n\u003cli\u003eBody threads match Fox weld-in mounts\u003c\/li\u003e\n\u003cli\u003eMolded rubber strike pad for reduced noise and a softer impact\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBody: 6061-T6 aluminum, hard anodized black\u003c\/li\u003e\n\u003cli\u003eTube shaft: SAE C1045 steel\u003c\/li\u003e\n\u003cli\u003eBody nuts: DOM A513 steel tube, gold zinc\u003c\/li\u003e\n\u003cli\u003eStrike pad: molded rubber\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: moderate\u003c\/li\u003e\n\u003cli\u003eBody modification: cutting\u003c\/li\u003e\n\u003cli\u003eInstall time: 2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eHydraStrike hydraulic bump stops (2)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the front upper bump location.\u003c\/li\u003e\n\u003cli\u003eMetalCloak has not tested them on the TJ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JK (2007-2018)\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1710\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145285529916,"sku":"1710","price":829.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1710-new-with-logo.jpg?v=1794461276"},{"product_id":"metalcloak-hydrastrike-hydraulic-rear-bump-stops-pair-jeep-wrangler-jl-2018-2026","title":"MetalCloak HydraStrike Hydraulic Rear Bump Stops | Pair | Jeep Wrangler JL (2018-2026) | P\/N 1711","description":"\u003cp\u003eHydraStrike nitrogen-charged hydraulic bump stops mount at the rear upper bump location of the 2018-2026 Jeep Wrangler JL. The internal reservoir piston design damps from the first hit with no warm-up, for controlled and repeated bottom-out in aggressive off-road use.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHydraulic, nitrogen-charged, oil-damped bump stops\u003c\/li\u003e\n\u003cli\u003e0.125in wall tube shaft\u003c\/li\u003e\n\u003cli\u003eDisogrin seals for sealing performance and wear resistance\u003c\/li\u003e\n\u003cli\u003e5\/8in wide PTFE-lined shaft bearing\u003c\/li\u003e\n\u003cli\u003eInternal reservoir design keeps the nitrogen charge separate from the oil\u003c\/li\u003e\n\u003cli\u003eNo warm-up required\u003c\/li\u003e\n\u003cli\u003eDelrin strike pad\u003c\/li\u003e\n\u003cli\u003eBody threads match Fox weld-in mounts\u003c\/li\u003e\n\u003cli\u003eReduced noise and softer impact feel\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear upper bump location\u003c\/li\u003e\n\u003cli\u003eBody: 6061-T6 aluminum, hard anodized black\u003c\/li\u003e\n\u003cli\u003eShaft: SAE C1045 steel tube\u003c\/li\u003e\n\u003cli\u003eBody nuts: gold zinc\u003c\/li\u003e\n\u003cli\u003eWeld-on body mount: 1\/8in hot rolled steel, raw\u003c\/li\u003e\n\u003cli\u003eStrike pad: Delrin\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: difficult\u003c\/li\u003e\n\u003cli\u003eBody modification: cutting and welding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHydraStrike bump stops (2)\u003c\/li\u003e\n\u003cli\u003eWeld-on body mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eWeld-on mounts require cutting and welding during installation.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1711\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145285693756,"sku":"1711","price":829.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1711-new-with-logo.jpg?v=1794461285"},{"product_id":"metalcloak-hydrastrike-hydraulic-bump-stops-rear-pair-jeep-gladiator-jt-2020-2026","title":"MetalCloak HydraStrike Hydraulic Bump Stops | Rear, Pair | Jeep Gladiator JT (2020-2026) | P\/N 1712","description":"\u003cp\u003eHydraStrike hydraulic bump stops are made for the rear upper bump location on the 2020-2026 Jeep Gladiator JT. They are nitrogen-charged and oil-damped, with an internal reservoir that keeps the nitrogen separate from the shock oil.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHydraulic nitrogen-charged, oil-damped bump stops\u003c\/li\u003e\n\u003cli\u003eInternal reservoir design with no warm-up required\u003c\/li\u003e\n\u003cli\u003e0.125in wall tube shaft\u003c\/li\u003e\n\u003cli\u003eDisogrin seals and a 5\/8in wide PTFE-lined shaft bearing\u003c\/li\u003e\n\u003cli\u003eDelrin strike pad for reduced noise and a softer impact feel\u003c\/li\u003e\n\u003cli\u003eBody threads match Fox weld-in mounts\u003c\/li\u003e\n\u003cli\u003eWeld-on body mounts included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBump stop body: aluminum 6061-T6, hard anodized black\u003c\/li\u003e\n\u003cli\u003eTube shaft: steel, SAE C1045\u003c\/li\u003e\n\u003cli\u003eBody nut: steel tube, DOM A513, gold zinc\u003c\/li\u003e\n\u003cli\u003eStrike pad: Delrin\u003c\/li\u003e\n\u003cli\u003eWeld-on body mount: 1\/8in hot-rolled steel, raw\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: difficult\u003c\/li\u003e\n\u003cli\u003eBody modification: cutting and welding\u003c\/li\u003e\n\u003cli\u003eInstall time: 2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHydraStrike bump stops (2)\u003c\/li\u003e\n\u003cli\u003eWeld-on body mounts (2)\u003c\/li\u003e\n\u003cli\u003eGusset plates (2)\u003c\/li\u003e\n\u003cli\u003eBody nut wrenches (2)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eThe 1717 Rear Bump Pads are made for use with these bump stops, sold separately.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1712\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145285857596,"sku":"1712","price":939.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1712-new-with-logo.jpg?v=1794461295"},{"product_id":"metalcloak-hydrastrike-axle-side-bump-pads-jeep-wrangler-tj-1997-2006-jk-2007-2018-jl-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak HydraStrike Axle Side Bump Pads | Jeep Wrangler TJ (1997-2006)\/JK (2007-2018)\/JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N 1713","description":"\u003cp\u003eThese 3in diameter aluminum axle side bump pads set the spacing for HydraStrike bump stops, which helps prevent tire-to-body interference with larger tires or longer travel. Choose the Spacer Kit Size option (1in, 2in, 3in or 4in) that gives the bump stop spacing your tires and suspension need.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAvailable in 1in, 2in, 3in and 4in heights\u003c\/li\u003e\n\u003cli\u003eOptimized for HydraStrike bump stops\u003c\/li\u003e\n\u003cli\u003eSolid 3in diameter aluminum\u003c\/li\u003e\n\u003cli\u003eRecessed hardware to help prevent damage\u003c\/li\u003e\n\u003cli\u003eDurable axle-side mounting design\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 3in diameter aluminum\u003c\/li\u003e\n\u003cli\u003eFinish: raw\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eBody modification: some drilling\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBump stop pads (pair)\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler TJ (1997-2006)\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler JK (2007-2018)\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMPN 1713 - 1\" Axle Side Bump Pads\u003c\/li\u003e\n\u003cli\u003eMPN 1714 - 2\" Axle Side Bump Pads\u003c\/li\u003e\n\u003cli\u003eMPN 1715 - 3\" Axle Side Bump Pads\u003c\/li\u003e\n\u003cli\u003eMPN 1716 - 4\" Axle Side Bump Pads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"1\" Axle Side Bump Pads","offer_id":68145286414652,"sku":"1713","price":84.0,"currency_code":"USD","in_stock":true},{"title":"2\" Axle Side Bump Pads","offer_id":68145286447420,"sku":"1714","price":99.0,"currency_code":"USD","in_stock":true},{"title":"3\" Axle Side Bump Pads","offer_id":68145286480188,"sku":"1715","price":199.0,"currency_code":"USD","in_stock":true},{"title":"4\" Axle Side Bump Pads","offer_id":68145286512956,"sku":"1716","price":224.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/17erte13-1in-bump-pads.jpg?v=1794461305"},{"product_id":"metalcloak-hydrastrike-bump-pads-rear-pair-jeep-gladiator-jt-2020-2026","title":"MetalCloak HydraStrike Bump Pads | Rear, Pair | Jeep Gladiator JT (2020-2026) | P\/N 1717","description":"\u003cp\u003eThese rear bump pads are made for HydraStrike hydraulic bump stops on the 2020-2026 Jeep Gladiator JT. They set the contact surface for the bump stop on factory M220 and UD60 rear axles without modification.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOptimized for HydraStrike hydraulic bump stops\u003c\/li\u003e\n\u003cli\u003eAdds approximately 2.25in of bump stop pad height\u003c\/li\u003e\n\u003cli\u003eAngled contact surface reduces scrub during articulation\u003c\/li\u003e\n\u003cli\u003eBolt-in, no-drill installation\u003c\/li\u003e\n\u003cli\u003eCompatible with factory M220 and UD60 axles\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 3\/16in hot-rolled steel\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eBody modification: none\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBump stop pads\u003c\/li\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eWorks in conjunction with the rear HydraStrike bump stops.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1717\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145286676796,"sku":"1717","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1717-new-with-logo.jpg?v=1794461314"},{"product_id":"metalcloak-rocksport-black-adjustable-reservoir-rear-shocks-toyota-tacoma-4g-2025-2026","title":"MetalCloak RockSport BLACK Adjustable Reservoir Rear Shocks | Toyota Tacoma 4G (2025-2026) | P\/N 1721","description":"\u003cp\u003eRockSport BLACK rear shocks for the 2025-2026 Toyota Tacoma 4G use a 2.5in aluminum body with a remote reservoir and eight compression settings. They are tuned to work with MetalCloak True Dual Rate coils, with digressive valving that balances control and comfort at slow and fast suspension speeds.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEasy 8 setting compression adjustment on a billet aluminum knob with laser-marked numbers\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall and increased fluid capacity for cooling\u003c\/li\u003e\n\u003cli\u003eRubber-covered stainless steel braided hydraulic hose\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eRecessed end caps for more usable shaft travel within the shock length\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in hard chrome plated shafts with an induction-hardened surface\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: 8 settings, about 15% more compression force per click\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, synthetic lined, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized Black Infinity\u003c\/li\u003e\n\u003cli\u003ePiston: Mil-Spec Type III clear hard anodized\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in, induction hardened to Rockwell C 60+, hard chrome plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair.\u003c\/li\u003e\n\u003cli\u003eAlignment by a suspension specialist is recommended after installing a MetalCloak suspension system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eToyota Tacoma 4G (2025-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1721\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145286807868,"sku":"1721","price":1449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1721-new-with-logo.jpg?v=1794461324"},{"product_id":"metalcloak-rocksport-black-xl-adjustable-reservoir-rear-shocks-toyota-tacoma-4g-2025-2026","title":"MetalCloak RockSport BLACK XL Adjustable Reservoir Rear Shocks | Toyota Tacoma 4G (2025-2026) | P\/N 1722","description":"\u003cp\u003eRockSport BLACK XL rear shocks for the 2025-2026 Toyota Tacoma 4G use a 2.5in aluminum body with a remote reservoir and eight compression settings. They are tuned to work with MetalCloak True Dual Rate coils, with digressive valving that balances control and comfort at slow and fast suspension speeds.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eExtended-length design for increased shock travel and rear suspension articulation\u003c\/li\u003e\n\u003cli\u003eEasy 8 setting compression adjustment on a billet aluminum knob with laser-marked numbers\u003c\/li\u003e\n\u003cli\u003e2.5in diameter aluminum body with 3\/16in wall and increased fluid capacity for cooling\u003c\/li\u003e\n\u003cli\u003eRubber-covered stainless steel braided hydraulic hose\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eRecessed end caps for more usable shaft travel within the shock length\u003c\/li\u003e\n\u003cli\u003eOversized 7\/8in hard chrome plated shafts with an induction-hardened surface\u003c\/li\u003e\n\u003cli\u003eTriple seal pack and removable bump cap that also gives access for servicing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: 8 settings, about 15% more compression force per click\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, synthetic lined, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized Black Infinity\u003c\/li\u003e\n\u003cli\u003ePiston: Mil-Spec Type III clear hard anodized\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in, induction hardened to Rockwell C 60+, hard chrome plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair.\u003c\/li\u003e\n\u003cli\u003eAlignment by a suspension specialist is recommended after installing a MetalCloak suspension system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eToyota Tacoma 4G (2025-2026)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1722\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145287004476,"sku":"1722","price":1449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1722-new-with-logo.jpg?v=1794461333"},{"product_id":"metalcloak-rocksport-black-adjustable-reservoir-front-lift-coilovers-2-5in-lift-toyota-tacoma-4g","title":"MetalCloak RockSport BLACK Adjustable Reservoir Front Lift Coilovers | 2.5in Lift | Toyota Tacoma 4G | P\/N 1723","description":"\u003cp\u003eThese RockSport BLACK front lift coilovers for the Toyota Tacoma 4G are pre-set to 2.5in of lift. They use a 2.5in diameter aluminum body with an 8-position remote reservoir, and the coil collars allow ride height and spring tension to be adjusted.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-set at 2.5in of lift\u003c\/li\u003e\n\u003cli\u003eHeight adjustable with gold anodized coil adjustment collars\u003c\/li\u003e\n\u003cli\u003e8 position compression adjustment on a billet aluminum knob, about 15% more compression force per setting\u003c\/li\u003e\n\u003cli\u003eSpecifically tuned heavy-duty coils\u003c\/li\u003e\n\u003cli\u003eRubber-covered stainless steel braided hydraulic hose\u003c\/li\u003e\n\u003cli\u003eParabolic valve stack (patent pending #63\/743,954) for variable damping resistance as loads change\u003c\/li\u003e\n\u003cli\u003eHigh-flow piston with nine ports: six for compression and three for rebound\u003c\/li\u003e\n\u003cli\u003eRecessed inner cap for more usable travel without a longer shock\u003c\/li\u003e\n\u003cli\u003eGold zinc shock and reservoir mounts\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eLift: pre-set at 2.5in\u003c\/li\u003e\n\u003cli\u003eLength, eye to eye: 25.0in extended, 18.4in collapsed\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in diameter aluminum, 3\/16in wall\u003c\/li\u003e\n\u003cli\u003eReservoir hose: stainless steel braided, 3,000 psi working pressure\u003c\/li\u003e\n\u003cli\u003eFinish: Mil-Spec Type III hard anodized Black Infinity\u003c\/li\u003e\n\u003cli\u003eShaft: 7\/8in, induction hardened to Rockwell C 60+, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eMounting brackets: 1\/8in hot rolled steel, gold zinc plated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eSold as a pair.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1723\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145287627068,"sku":"1723","price":2599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1720-new-with-logo_1.jpg?v=1794461342"},{"product_id":"metalcloak-rocksport-black-2-5in-traditional-shim-conversion-kit","title":"MetalCloak RockSport BLACK 2.5in Traditional Shim Conversion Kit | P\/N 1799","description":"\u003cp\u003eThis kit converts the internal Parabolic Valving of a 2.5in RockSport BLACK shock to a traditional, fully customizable shim stack. It suits tuning and service work and lets you choose your own shim selection for damping.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMade for RockSport BLACK shocks\u003c\/li\u003e\n\u003cli\u003eConverts to a traditional shim stack\u003c\/li\u003e\n\u003cli\u003ePrecision-machined washers\u003c\/li\u003e\n\u003cli\u003eService-friendly configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompatibility: 2.5in RockSport BLACK shocks\u003c\/li\u003e\n\u003cli\u003eWashers: steel\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty: easy\u003c\/li\u003e\n\u003cli\u003eBody modification: none\u003c\/li\u003e\n\u003cli\u003eInstall time: 1 hour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.51in ID x 0.75in OD x 0.10in thick washers (12)\u003c\/li\u003e\n\u003cli\u003e0.51in ID x 0.88in OD x 0.10in thick washers (4)\u003c\/li\u003e\n\u003cli\u003e0.51in ID x 1.82in OD x 0.10in thick washers (4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eThe kit includes only the washers needed for the conversion. Shim discs are not included.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1799\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145287823676,"sku":"1799","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1799-new-with-logo.jpg?v=1794461352"},{"product_id":"metalcloak-baller-joints-hd-knurled-ball-joints-full-set-jeep-wrangler-jk-2007-2018","title":"MetalCloak Baller Joints HD Knurled Ball Joints | Full Set | Jeep Wrangler JK (2007-2018) | P\/N 1913","description":"\u003cp\u003eBaller Joints HD Knurled Ball Joints are engineered for worn or oversized axle C bores on the 2007-2018 Jeep Wrangler JK and Wrangler Unlimited, where standard ball joints may no longer hold their press fit. The knurled housing increases retention inside the axle C without replacing the housing. The set includes upper and lower joints.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLoad bearing upper and lower joints\u003c\/li\u003e\n\u003cli\u003eKnurled housing for increased press-fit retention in worn or oversized axle C bores\u003c\/li\u003e\n\u003cli\u003eHardened steel races and induction-hardened chromoly spindle and ball\u003c\/li\u003e\n\u003cli\u003eComposite bushing for radial loads, load-rated at over 23,000 lbs each\u003c\/li\u003e\n\u003cli\u003eSealed top and bottom with Buna-N O-rings and shaft wiper seals\u003c\/li\u003e\n\u003cli\u003eRecessed zerk fittings for greasing\u003c\/li\u003e\n\u003cli\u003eAdjustable pre-load for upper and lower joints\u003c\/li\u003e\n\u003cli\u003eRebuildable in the Jeep, upper and lower\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSpindle and ball: induction-hardened chromoly\u003c\/li\u003e\n\u003cli\u003eRaces: tool steel\u003c\/li\u003e\n\u003cli\u003eLock nuts and top caps: aluminum, which capture the joint in the C\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc, clear zinc and Type III anodized black\u003c\/li\u003e\n\u003cli\u003eSet: upper and lower joints\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBaller Joints (upper and lower, full set)\u003c\/li\u003e\n\u003cli\u003eMetalCloak lock-ring wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eJeep Wrangler JK (2007-2018)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1913\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145287987516,"sku":"1913","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1913-new-with-logo.jpg?v=1794461360"},{"product_id":"metalcloak-knurled-baller-joints-hd-ball-joints-full-set-jeep-wrangler-jl-2018-2026-gladiator-jt-2020-2026","title":"MetalCloak Knurled Baller Joints HD Ball Joints | Full Set | Jeep Wrangler JL (2018-2026)\/Gladiator JT (2020-2026) | P\/N 1914","description":"\u003cp\u003eThis full set of knurled Baller Joints replaces the upper and lower ball joints on the 2018-2026 Jeep Wrangler JL and 2020-2026 Gladiator JT. The knurled housing increases press-fit retention in worn or oversized axle C bores where standard ball joints may no longer hold.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eKnurled housing for worn or oversized axle C bores\u003c\/li\u003e\n\u003cli\u003eIncreased press-fit retention\u003c\/li\u003e\n\u003cli\u003eLoad-bearing upper and lower joints\u003c\/li\u003e\n\u003cli\u003eHardened steel races\u003c\/li\u003e\n\u003cli\u003eInduction-hardened chromoly spindle and ball\u003c\/li\u003e\n\u003cli\u003eComposite bushing for radial (side to side) loads\u003c\/li\u003e\n\u003cli\u003eFully sealed with top and bottom O-rings and shaft wiper seals\u003c\/li\u003e\n\u003cli\u003eRecessed zerk fittings for greasing\u003c\/li\u003e\n\u003cli\u003eAdjustable preload on upper and lower joints\u003c\/li\u003e\n\u003cli\u003eRebuildable in the Jeep\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSet: upper and lower ball joints\u003c\/li\u003e\n\u003cli\u003eSpindle and ball: induction-hardened chromoly\u003c\/li\u003e\n\u003cli\u003eSeals: Buna-N rubber O-rings with shaft wipers\u003c\/li\u003e\n\u003cli\u003eFinish: gold zinc, clear zinc and Type-III anodized black components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIn the Box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUpper and lower knurled ball joints\u003c\/li\u003e\n\u003cli\u003eMetalCloak lock-ring wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eNotes\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eAluminum lock nuts and threaded top caps capture the joints in the axle C.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eJeep Wrangler JL (2018-2026)\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Numbers\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eMPN 1914\u003c\/li\u003e\u003c\/ul\u003e","brand":"MetalCloak","offers":[{"title":"Default Title","offer_id":68145288151356,"sku":"1914","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/files\/1914-new-with-logo.jpg?v=1794461370"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0725\/0136\/3004\/collections\/VdMn2Jas47WMgFHH.jpg?v=1794460982","url":"https:\/\/highliftoffroad.com\/collections\/metalcloak.oembed?page=3","provider":"HighLift Off-Road","version":"1.0","type":"link"}